RF/Analog/Mixed Signal Engineer

Apple, Inc.

Austin (TX)

On-site

USD 120,000 - 180,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Apple Inc. in Austin, Texas, seeks a Master’s-level engineer to define and document block- and chip-level specifications for high-speed analog/mixed-signal designs.

You will work on PLL/LDO/ADC/DAC blocks, SERDES TX/RX paths, and phase interpolators to meet power, performance, and area targets. You will design clocking architectures, test clock receivers, and perform post-layout verification using EMIR and DFT tools, while supporting environment testing across process, temperature, and voltage

Qualifications

  • Designing and analyzing high-speed analog and mixed-signal building blocks including PLL, LDO, ADC, DAC and Phase-Interpolator.
  • Leveraging end-to-end SERDES systems including TX/RX design and channel characteristics and equalization techniques.
  • Utilizing RTL/Verilog modeling to develop models for mixed-signal blocks to help with system level design verification.
  • Modeling MATLAB for performance analysis of SERDES (jitter tolerance, equalization analysis).
  • Leveraging testing equipment including spectrum analyzers, oscilloscope, and signal generators for post-silicon validation and testing.
  • Utilizing layout techniques for analog and high-speed circuits including matching, noise to ensure the post-layout performance.
  • Leveraging signal processing for design and analysis including filtering, equalization, and spectral analysis.
  • Using Python and Shell scripting to automate design simulations and for data analysis.
  • Utilizing design validation tools including EMIR, static timing analysis, and DFT to ensure design robustness and manufacturability.

Responsibilities

  • Define and document functional and performance requirements for blocks and chips.
  • Design clock distribution and CDR circuits; ensure high-speed clock integrity.
  • Develop and verify 100MHz reference clock receiver and 50-ohm termination.
  • Investigate power-efficient clocking architectures to reduce power consumption.
  • Perform environment testing across process, temperature, and voltage conditions to ensure robustness.

Skills

High-speed analog/mixed-signal design
SERDES TX/RX design
Verilog modeling
Python scripting
Power-aware design

Education

Master's degree in Electrical Engineering or related

Tools

MATLAB
Virtuoso/ICCAD tooling
EMIR, static timing analysis, DFT tools
Spectrum analyzers/oscilloscope/signal generators

Job description

Imagine what you can do here. Apple is a place where extraordinary people gather to do their lives best work. Together we create products and experiences people once couldn't have imagined, and now, can't imagine living without. It's the diversity of those people and their ideas that inspires the innovation that runs through everything we do.

APPLE INC has the following available in Austin, Texas. Generation of Block and Chip-Level Specifications: Defining and documenting functional and performance requirements for blocks and chips, ensuring they align with system-level goals for high-speed, low-power communication. Transistor-Level Circuit Design: Designing complex analog and mixed-signal circuits at the transistor level, ensuring precision in meeting power, performance, and area constraints; Being familiar with 'Virtuoso' to test the design with various options & environment. Block-Level Verification: Conducting block-level simulations and analyses to ensure that circuits meet performance, power, and area requirements, verifying each design's functionality. Clock Distribution and CDR Circuit Design: Designing clock distribution circuits to ensure high-speed clocks are effectively delivered to various chip components; Focusing on designing CDR circuits that recover data with minimal error; Using SERDES system to determine circuits required in the task. Investigation of Power-Efficient Clocking Architectures: Investigating new clocking architectures to reduce power consumption in the semiconductor. This includes examining novel approaches to clocking that minimize the power draw of the chip's clocking circuits, which typically account for a significant portion of total power consumption. Duty Cycle Corrector and Phase Interpolator Design: Designing and optimizing Duty Cycle Correctors (DCC) and Phase Interpolators (PI) to improve clock quality. Designing precise comparators and samplers for the DCC, focusing on layout optimization. Focusing on improving the linearity and step size of the Phase Interpolator within the CDR block to enhance its performance and reduce power consumption. 100MHz Reference Clock Receiver: Designing the clock receiver to deliver a 100 MHz clock from the pad to the PLL with minimal jitter contribution Designing a 50-ohm termination to avoid reflections from the chip Redesigning the clock receiver to prevent degradation due to headroom issues caused by the reduction in power supply voltage from 1.2V to 1.06V Environment Testing and Reliability Analysis: Testing the chips under various process, temperature, and voltage conditions to ensure their robustness and functionality in diverse environments. 40 hours/week.

Minimum Qualifications

Master's Degree or foreign equivalent in Electrical Engineering, Computer Engineering, Electronics Engineering, or related field.

Education and/or experience must include:
  • Designing and analyzing high-speed analog and mixed-signal building blocks including PLL, LDO, ADC, DAC and Phase-Interpolator.
  • Leveraging end-to-end SERDES systems including TX/RX design and channel characteristics and equalization techniques.
  • Utilizing RTL/Verilog modeling to develop models for mixed-signal blocks to help with system level design verification.
  • Modeling MATLAB for performance analysis of SERDES (jitter tolerance, equalization analysis).
  • Leveraging testing equipment including spectrum analyzers, oscilloscope, and signal generators for post-silicon validation and testing.
  • Utilizing layout techniques for analog and high-speed circuits including matching, noise to ensure the post-layout performance.
  • Leveraging signal processing for design and analysis including filtering, equalization, and spectral analysis.
  • Using Python and Shell scripting to automate design simulations and for data analysis.
  • Utilizing design validation tools including EMIR, static timing analysis, and DFT to ensure design robustness and manufacturability.
Preferred Qualifications

N/A

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

RF/Analog/Mixed Signal Engineer
RF/Analog/Mixed Signal Engineer

Apple, Inc. • Cupertino (CA)

On-site
USD 185,000 - 278,000
RF/Analog/Mixed‑Signal Engineer: High-Speed, Low-Power
RF/Analog/Mixed‑Signal Engineer: High-Speed, Low-Power

Apple, Inc. • Austin (TX)

On-site
USD 120,000 - 180,000
Design for Test Engineer
Design for Test Engineer

Apple, Inc. • Cupertino (CA)

On-site
USD 174,000 - 225,000
Apple stock programs
Discretionary RSU awards
Health and dental coverage
+2
Front End Design Engineer
Front End Design Engineer

Apple, Inc. • Austin (TX)

On-site
USD 110,000 - 150,000
Health insurance
Analog/Mixed-Signal Circuit Design Engineer
Analog/Mixed-Signal Circuit Design Engineer

Apple Inc. • Beaverton (OR)

On-site
USD 140,000 - 190,000
SerDes Circuit Design Engineer
SerDes Circuit Design Engineer

Apple, Inc. • Beaverton (OR)

On-site
USD 180,000 - 240,000
Analog IC Design Engineer
Analog IC Design Engineer

Apple, Inc. • Beaverton (OR)

On-site
USD 130,000 - 200,000
SerDes Circuit Design Engineer
SerDes Circuit Design Engineer

Apple, Inc. • Melbourne (FL)

On-site
USD 150,000 - 230,000
Digital Circuit Design Engineer
Digital Circuit Design Engineer

Apple Inc. • Austin (TX)

On-site
USD 150,000 - 190,000
SerDes Circuit Design Engineer
SerDes Circuit Design Engineer

Apple • Waltham (MA)

On-site
USD 116,400 - 203,000