Reliability Engineer

Valero Energy Corporation

San Antonio (TX)

On-site

USD 110,000 - 150,000

Full time

2 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Valero Energy is seeking a Reliability Engineer in San Antonio, TX to optimize fixed and rotating Equipment life through RBI initiatives, PM/PdM program enhancement, and reliable maintenance practices. You will collaborate with Operations, Maintenance, and Engineering to ensure equipment operates within design parameters and support capital projects with robust risk assessments.

The role requires a bachelor’s degree in engineering, 5+ years in reliability/maintenance, and familiarity with CAE

Qualifications

  • Bachelor’s or higher level degree in Engineering.
  • Chartered Engineer status with the Institute of Mechanical Engineers (IMechE).
  • 5 years of experience in reliability or maintenance engineering.
  • Experience with CAE software such as Caesar II and Plant Manager.
  • Experience using Plant Condition Management Software (PCMS).
  • Ability to complete API 579-1/ASME FFS-1 Level 1 & Level 2 FFS assessments.
  • Knowledge of RBI practices including API RP 580, welding processes, and NBIC repair standards.

Responsibilities

  • Provide reliability technical and engineering services to optimize equipment life.
  • Support RBI initiatives and PM/PdM program development and audits.
  • Develop maintenance procedures, training, and processes for reliability.
  • Lead Root Cause Failure Analyses and document lessons learned.
  • Prepare AFE justification and participate in capital project reviews.
  • Support Process Hazard Analyses and Management of Change processes.
  • Utilize SAP and reliability databases to track histories and costs.

Skills

Root Cause Analysis
Reliability Engineering
Maintenance Planning
On-call Readiness

Education

Bachelor’s degree in Engineering

Tools

Caesar II
Plant Manager
PCMS
ASME/API standards

Job description

Job Description - Reliability Engineer (26001G9)

Job Description

Reliability Engineer - 26001G9

Description

The Reliability Engineer provides reliability technical and engineering services to optimize fixed and rotating equipment life in a safe and effective manner.

The Reliability Engineer will:

Provide technical support to assigned areas of responsibility by providing assistance in resolving fixed equipment design, operation, and maintenance problems, as well as developing pressure vessel and piping repair plans.

Provide technical support to the inspection department, including specifying data needs for the safe and reliable operation of process plant and equipment.

Assist in the implementation, management and optimisation of Risk Based Inspection (RBI) initiatives for the assigned areas of responsibility.

Assist in formulating, implementing, maintaining and auditing Preventive Maintenance (PM) and Predictive Diagnostic Maintenance (PdM) programs.

Develop, maintain and ensure continuous improvements of the refinery PM/PdM program.

Assist Operations, Product Control, and Maintenance Departments in developing procedures, training, and processes to ensure equipment is operated within its design parameters.

Advise engineering on new capital designs and installations to ensure that equipment reliability, operability, and maintainability are addressed.

Develop and review equipment specifications and standards for reliability improvement.

Develop and track cost justifications for reliability improvement.

Provide quality control/assurance services for shop and field repairs.

Lead and support Root Cause Failure Analyses and CauseMap investigations to ensure lessons learned from process plant and equipment failures.

Ensure/follow up on the execution or implementation of reliability derived recommendations.

Develop basic engineering packages for improvement projects, generating early phase Approval for Expenditure (AFE) documentation for justification and Management endorsement.

Support safe and reliable operation of the process plant and equipment through Process Hazard Analyses (PHA) and ensure appropriate asset change management through Management of Change (MOC).

Specify equipment according to standards and established practices prior to purchase, including the engineering review of repairs to process plant and equipment, both temporary and permanent.

Utilise reliability database, SAP and other electronic tools to track cost, equipment histories and preventive/predictive maintenance.

Manage the health and status of assigned asset areas and equipment within a multi-discipline team including Operations and Engineering representatives.

Lead in preparation and planning of the routine reliability reviews with Management, identifying and recommendations for addressing Bad Actors where appropriate.

Be responsible for the development of maintenance or repair scope for the assigned areas of responsibility for online and offline maintenance events.

Must be able to complete defined periods of on-call, as well as provide out of hours support to Refining operations, with short notice, participating in troubleshooting on an as needed basis.

Must be able to travel to Valero Headquarters in San Antonio, Texas on an infrequent basis for training and networking.

Perform other duties as assigned.

Qualifications

Required:

Bachelor’s or higher level degree in Engineering.

Preferred:

Chartered Engineer status with the Institute of Mechanical Engineers (IMechE).

5 years of experience in reliability or maintenance engineering.

Experience in computer ‑ aided engineering (CAE) simulation software such as Caesar II and/or Plant Manager.

Experience in the use of Plant Condition Management Software (PCMS) to locate, understand, and manage equipment inspection data, history and schedules.

Ability to complete API 579-1/ASME FFS-1 Level 1 and Level 2 Fitness-For-Service (FFS) assessments to demonstrate safe operation of plant and process equipment.

Knowledge of pressure vessel and piping component design including material, temperature, fabrication, examination and testing considerations, including ASME Section VIII Div1 & Div2 for process vessels and ASME B31.3 for process piping systems, or equivalent.

Knowledge of metallurgy, alloy selection, basic welding concepts, plus an overview of corrosion and materials damage mechanisms in the major refining process units.

Knowledge of Risk-Based Inspection (RBI) practices including industry standard API RP 580.

Knowledge of welding processes and how to select the optimal method for specific applications, aligned to ASME, API as well as NBIC repair standards.

This is a full-time site-based role.

About Valero
Valero Energy Corporation, through its subsidiaries, is an international manufacturer and marketer of transportation fuels and other petrochemical products. Valero, a Fortune 500 company based in San Antonio, Texas, with approximately 10,000 employees, is an independent petroleum refiner and ethanol producer, and its assets include 14 petroleum refineries with a combined throughput capacity of approximately 3 million barrels per day and 12 ethanol plants with a combined production capacity of approximately 1.7 billion gallons per year. The petroleum refineries are located in the United States, Canada and the United Kingdom, and the ethanol plants are in the Mid-Continent region of the U.S. In addition, Valero owns all of the general partner and limited partner interests in Valero Energy Partners LP. Valero sells its products in both the wholesale rack and bulk markets, and approximately 7,400 outlets carry Valero's brand names in the U.S., Canada, the U.K. and Ireland.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Sr. Process Engineer
Sr. Process Engineer

Valero • Port Arthur (TX)

On-site
USD 120,000 - 170,000
Annual bonus
401(k) match
Pension plan
+1
Sr. Process Engineer
Sr. Process Engineer

Valero Energy • Port Arthur (TX)

On-site
USD 120,000 - 150,000
Competitive pay and annual bonus
401K match up to 7%
Company-sponsored Pension Plan
+1
Principal Process Engineer – Hydroprocessing
Principal Process Engineer – Hydroprocessing

Valero Energy • San Antonio (TX)

On-site
USD 150,000 - 190,000
Competitive Pay
Annual bonus program
401(k) match
+5
Principal Process Engineer – Hydroprocessing
Principal Process Engineer – Hydroprocessing

Valero • San Antonio (TX)

On-site
USD 140,000 - 190,000
Competitive Pay and Annual Bonus
401(k) match up to 7% with immediate v
Pension Plan
+6
Refinery Reliability Engineer: Asset Optimization & RBI
Refinery Reliability Engineer: Asset Optimization & RBI

Valero Energy Corporation • San Antonio (TX)

On-site
USD 110,000 - 150,000
Director Technology - Hydroprocessing
Director Technology - Hydroprocessing

Valero • San Antonio (TX)

On-site
USD 180,000 - 240,000
401(k) match
Pension plan
Healthcare
+5
Director Technology - Hydroprocessing
Director Technology - Hydroprocessing

Valero Energy • San Antonio (TX)

On-site
USD 180,000 - 300,000
Competitive pay
Annual bonus program
Comprehensive healthcare
+2
Safety Engineer
Safety Engineer

Valero Energy • Houston (TX)

On-site
USD 85,000 - 120,000
Competitive Pay and Annual Bonus
401(K) match with immediate vesting
Company-sponsored Pension Plan
+1
Refinery Inspector
Refinery Inspector

Valero Energy • Memphis (TN)

On-site
USD 70,000 - 110,000
Competitive pay
Annual bonus program
401(k) match up to 7%
+2
Principal Process Engineer - Fractionation
Principal Process Engineer - Fractionation

Valero Energy • San Antonio (TX)

On-site
USD 150,000 - 210,000