Quality Supervisor

Motor Wheel

Chattanooga (TN)

On-site

USD 70,000 - 100,000

Full time

Just now
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Hendrickson in Chattanooga, Tennessee is seeking a Quality Inspector/Lead Technician to perform inspections and tests, investigate quality problems, and support the quality management system on the manufacturing floor. This role requires strong knowledge of ISO/IATF 16949 and PPAP practices and offers opportunities to lead root cause analysis and drive improvements.

The position involves working with engineering to interpret quality requirements, using advanced quality tools, and interacting

Qualifications

  • Experience in ISO/IATF 16949 Quality Management System.
  • Ability to prepare dimensional & statistical reports.
  • Ability to present data to others.
  • Experience in inspection gauges/fixtures and methods.
  • High level of analytical skills.
  • Ability to read blueprints and have a working knowledge of geometric tolerances.
  • Familiarity with basic computer skills and file organization.
  • Ability to problem solve.
  • PPAP / customer experience within the automotive or tuck sector or similar.
  • Experience in supporting ISO9001 Quality Systems.
  • Experience in developing PPAP’s control plans, FMEA’s, and flow charts.
  • Experience implementing sampling plans and utilizing basic statistics and SPC in a production environment.
  • Skilled in blueprint reading, GD&T, and inspection techniques.

Responsibilities

  • Lead / assist the manufacturing floor in interpreting quality requirements from prints, published specifications, and by working with engineering to establish standards where no product or vague specification exists.
  • Utilize quality tools (capability studies, Gage R&R, basic statistics, control charts and sampling) to improve quality and adjust inspection frequencies as needed.
  • Lead/perform daily product verification and assign inspection / test responsibilities.
  • Lead / assist root cause analysis and provide closure to action items and corrective action follow up.
  • Supports the Quality Manager on ISO9001 document and data control.
  • Interact with customers and suppliers on quality issues.
  • Develop PPAP sample submissions and required documentation to customers under the direction of the quality manager or quality engineer.
  • Review and verify supplier PPAP sample submissions and associated documentation.
  • Review and verify supplier corrective action responses.
  • Perform ISO9001 QMS audits and support ISO9001 compliance
  • Lead improvements in plant PPM measures through participating in error proofing and continuous improvement activities.
  • Participate in APQP meetings and support AQPQ launch initiatives by performing print reviews, project management under the direction of the quality manager or quality engineer.
  • Perform measurement systems analysis on tooling and measurement systems under the direction of the quality manager or quality engineer.
  • Limited travel may be required (planned and in emergency situations).
  • Other duties as assigned.

Skills

ISO/IATF 16949
QMS reporting
Data presentation
Blueprint reading
GD&T
Statistical methods
Problem solving
Team player
Overtime willingness
Root cause analysis
PPAP experience
Process improvement

Education

Associate's degree

Tools

Inspection gauges

Job description

2660 Sidney St, Chattanooga , Tennessee 37408 , United States

Position Type

Full-time

Job Description

Position Purpose:

Perform inspections and tests, quality problem investigation and resolution. Support manufacturing in the production of products that meet specifications. Support the quality management system.

Essential Functions:

  • Lead / assist the manufacturing floor in interpreting quality requirements from prints, published specifications, and by working with engineering to establish standards where no product or vague specification exists.
  • Utilize quality tools (capability studies, Gage R&R, basic statistics, control charts and sampling) to improve quality and adjust inspection frequencies as needed.
  • Lead/perform daily product verification and assign inspection / test responsibilities.
  • Lead / assist root cause analysis and provide closure to action items and corrective action follow up.
  • Supports the Quality Manager on ISO9001 document and data control.
  • Interact with customers and suppliers on quality issues.
  • Develop PPAP sample submissions and required documentation to customers under the direction of the quality manager or quality engineer.
  • Review and verify supplier PPAP sample submissions and associated documentation.
  • Review and verify supplier corrective action responses.
  • Perform ISO9001 QMS audits and support ISO9001 compliance
  • Lead improvements in plant PPM measures through participating in error proofing and continuous improvement activities.
  • Participate in APQP meetings and support AQPQ launch initiatives by performing print reviews, project management under the direction of the quality manager or quality engineer.
  • Perform measurement systems analysis on tooling and measurement systems under the direction of the quality manager or quality engineer.
  • Limited travel may be required (planned and in emergency situations).
  • Other duties as assigned.

Education and Training:

  • Associates degree and at least 7 years of related experience in quality manufacturing setting preferred.

Minimum Qualifications:

  • Experience in ISO/IATF 16949 Quality Management System.
  • Ability to prepare dimensional & statistical reports.
  • Ability to present data to others.
  • Experience in inspection gages/fixtures and methods.
  • High level of analytical skills.
  • Ability to read blueprints and have a working knowledge of geometric tolerances.
  • Familiarity with basic computer skills and file organization.
  • Ability to problem solve.
  • PPAP / customer experience within the automotive or tuck sector or similar.
  • Experience in supporting ISO9001 Quality Systems.
  • Experience in developing PPAP’s control plans, FMEA’s, and flow charts.
  • Experience implementing sampling plans and utilizing basic statistics and SPC in a production environment.
  • Skilled in blueprint reading, GD&T, and inspection techniques.Experience with processes (e.g. machining, welding, forming, assembly), and products.
  • Lead inspector / technician experience in quality preferred.
  • Excellent written and verbal communication skills with internal and external customers.
  • Ability to work with others in a team environment.
  • Willingness to work some overtime.

Physical Demands:

Frequent need to move about inside plant and office designated areas.

Walking Reaching

Environmental Conditions:

Office areas and non temperature-controlled manufacturing work environment with adequate lighting and ventilation. Dust/Debris, oil, and noise.

We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or other characteristics protected by law.

We offer a full complement of benefits that include medical, dental, and vision insurance; life, travel, and disability insurance; a flexible spending account; 401K plans; a pension plan; paid holidays and vacation. We also offer financial assistance programs if you decide to adopt a child or want to pursue further education.
We have a comprehensive wellness program and an Employee Assistance Program, that supports individuals in the proactive management of their overall health and wellness.

Hendrickson is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, or other characteristics protected by law.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Quality Technician - 3rd Shift
Quality Technician - 3rd Shift

Motor Wheel • Chattanooga (TN)

On-site
USD 65,000 - 85,000
Quality Technician: ISO 9001, PPAP & Process Improvement
Quality Technician: ISO 9001, PPAP & Process Improvement

Motor Wheel, LLC • Chattanooga (TN)

On-site
USD 65,000 - 85,000
Quality Technician - 3rd Shift
Quality Technician - 3rd Shift

Hendrickson • Chattanooga (TN)

On-site
USD 60,000 - 86,000
Quality Technician - 3rd Shift
Quality Technician - 3rd Shift

Hendrickson • Chattanooga (TN)

On-site
USD 70,000 - 90,000
Medical Insurance
Dental Insurance
Vision Insurance
+6
Quality Technician: ISO-Driven Inspector & Problem Solver
Quality Technician: ISO-Driven Inspector & Problem Solver

Hendrickson • Chattanooga (TN)

On-site
USD 70,000 - 90,000
Medical Insurance
Dental Insurance
Vision Insurance
+6
Quality Manager
Quality Manager

Hendrickson • Mount Vernon (MO)

On-site
USD 85,000 - 125,000
Medical insurance
Dental insurance
Vision insurance
+6
Quality Supervisor - ISO 9001, PPAP & CI Leader
Quality Supervisor - ISO 9001, PPAP & CI Leader

Motor Wheel • Chattanooga (TN)

On-site
USD 70,000 - 100,000
Quality Inspector (1st and 2nd Shifts)
Quality Inspector (1st and 2nd Shifts)

Hendrick Technical Solutions • United States

On-site
USD 52,000 - 68,000
Quality Technician
Quality Technician

Martins Investment Group • Erlanger (KY)

On-site
USD 29,000 - 39,000
Quality Technician
Quality Technician

ERMCO Inc. • Greeneville (TN)

On-site
USD 25,000 - 39,000