Quality Inspector Lead

Karman Space & Defense

Coronado (CA)

On-site

USD 51,000 - 62,000

Full time

1 hour ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Karman Space & Defense is seeking a Quality Inspector Lead to ensure precision, accuracy, and compliance of components for space and launch programs. You will perform complex inspections, guide and train inspectors, and uphold our quality systems across critical hardware.

The role requires hands‑on experience with measurement tools, AS9102 FAI, and QMS processes. You will mentor a team, develop inspection protocols, and drive continuous improvement while ensuring customer satisfaction and

Qualifications

  • Excellent oral and written comprehension.
  • Strong problem‑solving abilities.
  • Knowledge of algebra and geometry.
  • Broad understanding of engineering principles.
  • Experience using and calibrating measurement tools such as height gages and calipers.
  • Knowledge of ISO 9001 and AS9100 quality standards.
  • Four‑year degree or equivalent work experience.
  • Experience in quality control or quality assurance within a manufacturing environment.
  • Strong attention to detail, organization, communication skills, and ability to interact effectively across all levels of the organization.
  • Working knowledge of customer and supplier audits, customer specifications, and related quality processes.
  • Understanding of quality management system (QMS) reporting, record keeping, and procedural compliance.

Responsibilities

  • Performs dimensional and mechanical inspections of parts, components, and assemblies to verify conformance with blueprints, engineering specifications, and customer requirements.
  • Executes AS9102 First Article Inspection (FAI) processes and prepares inspection reports.
  • Uses precision measurement instruments such as calipers, micrometers, profilometers, ultrasonic tools, thread gages, and pin gages to assess conformity.
  • Interprets test results, compares findings to specifications and control limits, and recommends appropriate data disposition.
  • Leads, trains, and supports a team of quality inspectors, providing guidance on inspection methods, workflows, and best practices.
  • Develops and implements inspection protocols and procedures to improve inspection efficiency and effectiveness.
  • Investigates out‑of‑specification conditions and failures, recommending corrective actions.
  • Reviews and approves inspection reports, ensuring accuracy and completeness.
  • Monitors and inspects finished products to maintain compliance with quality and customer standards.
  • Prepares detailed reports on inspection results, identifying deviations and supporting corrective action processes.

Skills

Oral and written comprehension
Problem solving
Algebra and geometry
Engineering principles
Measurement tools calibration
ISO 9001 and AS9100
Quality control/QA
Attention to detail
Cross-functional communication
Audits and QMS reports
Compliance documentation

Education

Four‑year degree or equivalent

Job description

Karman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies’ core mission priorities, and meet the accelerating demand for access to space. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs.

This role is part of our Space and Launch business, which has contributed to the nation’s space programs for decades by delivering complete solutions from concept to flight. We enable successful space operations with mission-critical technology supporting every step from first launch to final landing, including launch vehicle subsystems, propulsion systems, aerodynamic and interstage systems, and payload protection and deployment. Our high-performance solutions are engineered to operate in the most extreme environments and meet precise mission requirements.

As a Quality Inspector Lead, you will help ensure the precision, accuracy, and compliance of components and assemblies that support critical space and launch programs. You will perform complex inspections, guide and train inspectors, and help maintain the integrity of our quality systems. Your work directly supports reliable hardware delivery, strong customer confidence, and consistent adherence to industry and regulatory standards.

Responsibilities
  • Performs dimensional and mechanical inspections of parts, components, and assemblies to verify conformance with blueprints, engineering specifications, and customer requirements.
  • Executes AS9102 First Article Inspection (FAI) processes and prepares inspection reports.
  • Uses precision measurement instruments such as calipers, micrometers, profilometers, ultrasonic tools, thread gages, and pin gages to assess conformity.
  • Interprets test results, compares findings to specifications and control limits, and recommends appropriate data disposition.
  • Leads, trains, and supports a team of quality inspectors, providing guidance on inspection methods, workflows, and best practices.
  • Develops and implements inspection protocols and procedures to improve inspection efficiency and effectiveness.
  • Investigates out‑of‑specification conditions and failures, recommending corrective actions.
  • Reviews and approves inspection reports, ensuring accuracy and completeness.
  • Monitors and inspects finished products to maintain compliance with quality and customer standards.
  • Prepares detailed reports on inspection results, identifying deviations and supporting corrective action processes.
Required Qualifications
  • Excellent oral and written comprehension.
  • Strong problem‑solving abilities.
  • Knowledge of algebra and geometry.
  • Broad understanding of engineering principles.
  • Experience using and calibrating measurement tools such as height gages and calipers.
  • Knowledge of ISO 9001 and AS9100 quality standards.
  • Four‑year degree or equivalent work experience.
  • Experience in quality control or quality assurance within a manufacturing environment.
  • Strong attention to detail, organization, communication skills, and ability to interact effectively across all levels of the organization.
  • Working knowledge of customer and supplier audits, customer specifications, and related quality processes.
  • Understanding of quality management system (QMS) reporting, record keeping, and procedural compliance.
Physical Requirements
  • Constant standing, walking, or sitting for at least 8 hours.
  • Occasional pushing, pulling, lifting, or carrying up to 50 lbs, minimum 35 lbs.
  • Sufficient hand, arm, and finger dexterity to operate a computer keyboard and other equipment.
  • Ability to see clearly at approximately 20 inches or less; corrective lenses may be worn.
  • Prolonged periods of repetitive movement.
  • Constant holding, grasping, turning, or working with hands.
  • Occasional reaching overhead, at shoulder level, and below shoulder level.
  • The essential functions of this position must be performed with or without reasonable accommodation.

This position requires U.S. person status under U.S. export control laws, including U.S. citizens and nationals, lawful permanent residents, refugees, and asylees.

Benefits Include
  • Medical, dental, and vision insurance
  • 401(k) with company match
  • Paid time off
  • Health Savings Account (HSA) with company contribution
  • Flexible Spending Accounts (FSA)
  • Company‑paid life and AD&D insurance
  • Short‑and-long‑term disability coverage
  • Tuition reimbursement

Hourly Rate

$37 - $45 USD

Karman Space & Defense is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, or any other status protected by applicable federal, state, or local law.

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey.Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiringprocess or thereafter. Any information that you do provide will be recorded and maintained in aconfidential file.

As set forth in Karman Space & Defense’s Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection.As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measurethe effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categoriesis as follows:

A \"disabled veteran\" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service‑connected disability.

A \"recently separated veteran\" means any veteran during the three‑year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An \"active duty wartime or campaign badge veteran\" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An \"Armed forces service medal veteran\" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Quality Inspector Lead
Quality Inspector Lead

Karman Space & Defense • Corona (CA)

On-site
USD 51,000 - 62,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
Quality Inspector
Quality Inspector

Karman Space & Defense • Brea (CA)

On-site
USD 28,000 - 37,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+1
Receiving Inspector
Receiving Inspector

Karman Space & Defense • Salt Lake City (UT)

On-site
USD 52,000 - 70,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
Quality Inspector – Assembly & Test
Quality Inspector – Assembly & Test

Karman Space & Defense • Salt Lake City (UT)

On-site
USD 65,000 - 90,000
Medical insurance
Dental insurance
401(k) with company match
+2
Quality Engineer I
Quality Engineer I

Karman Space & Defense • Seattle (WA)

On-site
USD 92,000 - 94,000
Medical/Dental/Vision
401(k) matching
Paid time off
+4
Quality Assurance Clerk
Quality Assurance Clerk

Karman Space & Defense • Seattle (WA)

On-site
USD 24,000 - 35,000
Medical Insurance
Dental Insurance
Vision Insurance
+6
Quality Engineer III
Quality Engineer III

Karman Space & Defense • Salt Lake City (UT)

On-site
USD 85,000 - 120,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+5
Quality Engineer III
Quality Engineer III

Karman Space & Defense • Seattle (WA)

On-site
USD 100,000 - 130,000
Medical, dental, and vision insurance
401(k) with company match
Paid time off
+4
Quality Manager
Quality Manager

Karman Space & Defense • Parowan (UT)

On-site
USD 120,000 - 160,000
Medical Insurance
401(k) with company match
Paid time off
+4
Quality Administrator
Quality Administrator

Karman Space & Defense • South El Monte (CA)

On-site
USD 34,000 - 41,000
Medical insurance
Dental insurance
Vision insurance
+7