Quality Inspector

Turner Construction Co

Decatur (AL)

In loco

USD 50.000 - 80.000

Tempo pieno

7 giorni fa
Candidati tra i primi

Una candidatura completa in un minuto

Curriculum e lettera di presentazione personalizzati, pronti da inviare.

Supera i filtri ATS

Descrizione del lavoro

Turner Construction Company is seeking a Quality Control Inspector to perform inspection and QC activities in a manufacturing environment, ensuring materials, processes, and finished products meet project specs and applicable codes.

Responsibilities include reviewing drawings, coordinating production plans, performing inspections, maintaining records, and collaborating with EH&S and project teams to uphold safety and quality standards on site in Decatur, Alabama.

Competenze

  • Prefer 5 years of industrial pipe and/or metal fabrication experience.
  • ASNT certifications desired.
  • Active OSHA 10-hour certification required or willing to pursue.
  • Proficient knowledge and use of materials, methods, and tools involved in metal fabrication, inspection tools and other quality control activities.
  • Ability to understand and interpret manufacturing contract documents, drawings, specifications, and project schedule to determine dimensions and materials to execute work activities.
  • Knowledge of arithmetic and basic geometry as applied to work tasks.
  • Excellent ability to measure, read, and convey lengths with ruler or tape with high degree of accuracy.
  • Strong planning and analysis skills.
  • Able to think critically and use good judgment to solve problems.

Mansioni

  • Review drawings and documents, and coordinate and understand production plan ahead of work going in place.
  • Read and interpret engineering drawings, shop drawings, and specs.
  • Perform in-process and final inspections on materials and fabricated components to verify compliance with drawings, specifications and work instructions.
  • Maintain accurate inspection records, reports, and documentation.
  • Ensure hold points and inspections checkpoints are followed per QC plans or ITPs.
  • Assist in receiving inspections of incoming materials.
  • Coordinate removal and replacement of non-conforming materials and workmanship; document compliance after corrective work.
  • Collaborate with EH&S and QC teams for safety and quality programs.
  • Ensure trade employees, subcontractors, and vendors comply with standards and safety codes.
  • Participate in daily Pre-Task Plans and wear appropriate PPE.
  • Ensure security of equipment and work area during operations.
  • Identify and escalate problems to Crew Leader or Supervisor for resolution.
  • Track production of completed tasks and participate in project meetings.
  • Maintain positive relationships with customers, contractors, suppliers and other employees.

Conoscenze

Quality control
Inspection
Reading drawings
Safety compliance
Team coordination

Formazione

ASNT Certification
OSHA 10 Certification

Strumenti

Inspection tools

Descrizione del lavoro

Position Description:
Perform inspection and quality control activities in a manufacturing environment to ensure materials, processes, and finished products meet company, customer and applicable code requirements.
Essential Duties & Key Responsibilities:

  • Review drawings and documents, and coordinate and understand production plan ahead of work going in place.
  • Fully comprehend scopes of work per plans and specifications to complete daily tasks.
  • Collaborate with xPL Project team, Crew Leader, and/or Supervisor to execute schedules of work. Execute recovery strategies to maintain production & shipping schedule, as required.
  • Perform inspection and quality control work tasks and activities as directed and under Foreperson supervision, including but not limited to:
  • Plan, monitor, document, and report compliance with contract documents in accordance with Manufacturing facility Quality Control (QC) Plan.
  • Read and interpret engineering drawings, shop drawings, and speciation’s.
  • Preform in-process and final inspections on materials and fabricated components to verify compliance with drawings, specifications and work instructions.
  • Maintain accurate inspection records, reports, and documentation.
  • Ensure hold points and inspections checkpoints are followed per QC plans or ITP’s
  • Assist in receiving inspections of incoming materials.
  • Thoroughly document and assist with coordination for removal and replacement of non-compliant materials and workmanship. Document compliance after completion of corrective work prior to starting subsequent work, subject to QC Manager's approval.
  • Quality material Inventory inspection equipment and give supply orders to manager for re-stocking.
  • Collaborate with Environmental Health Safety (EH&S) and Quality Control teams for safety and quality programs,
  • Ensure Trade employees, subcontractors, and vendors comply with xPL standards, safety codes, regulations, and jobsite security.
  • Display high level of teamwork, integrity, commitment, and leadership in daily operations.
  • Fully understand work instructions, project signage, and safety instructions from tool and equipment manufacturers and prepare and inspect tools prior use to ensure safe and working condition.
  • Participate in daily Pre-Task Plans in areas performing inspections, follow safety expectations for operation of equipment and tools, select appropriate equipment for performing work, adhere to safety protocols to perform work, and wear appropriate PPE (Personal Protection Equipment).
  • Ensure security of equipment and work area while conducting operations.
  • Identify, communicate, and escalation problems and issues to Crew Leader or Supervisor for immediate resolution.
  • Track production of completed tasks.
  • Participate in project meetings and provide project status.
  • Maintain positive working relationships with customers, contractors, suppliers and other employees.
  • May engage in activities requiring operation of project or personal vehicle.
  • Other activities, duties, and responsibilities as assigned.

Physical Demands:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to navigate work areas under construction, climb permanent and temporary stairs, navigate through plant while heavy machinery is operating, passenger use of construction personnel hoists, and climb ladders

Qualifications:

  • Prefer 5 years of industrial pipe and/or metal fabrication experience required, or equivalent combination of education, training, and experience
  • ASNT (American Society for Non-Destructive Testing) Certifications desired
  • Must have and maintain active OSHA 10-hour certification or willing to pursue certification
  • Proficient knowledge and use of materials, methods, and tools involved in metal fabrication, inspection tools and other quality control activities
  • Ability to understand, and interpret manufacturing contract documents, drawings (e.g., CAD drawings, shop, structural, blueprints, sketches, and/or building plans), specifications, scopes of work, vendor tags, and project schedule to determine dimensions and materials to execute work activities
  • Knowledge of and able to apply arithmetic and basic geometry to work tasks
  • Excellent ability to measure, read, and convey lengths with ruler or tape with high degree of accuracy
  • Strong planning and analysis skills
  • Able to think critically and use good judgment to solve problems
  • Ability to take direction, work independently with minimal supervision, and in team environment
  • Ability to apply active listening skills, ask clarifying questions, and complete assignments as directed
  • Clear and professional verbal and written communication skills and engage with all levels of teams, clients, business partners, and management
  • Reliable transportation required
  • Ability to accommodate night and weekend work as needed
Turner is an Equal Opportunity Employer —minorities/females/veterans/individuals with disabilities/sexual orientation/gender identity.

VEVRAA Federal Contractor

For reasonable accommodations, please click here .

View your Equal Employment Opportunity rights under the law.

Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.
VEVRAA Federal Contractor

Ottieni la revisione del curriculum gratis e riservata.

o trascina qui il file.

Similar jobs

Offerte di lavoro simili che vale la pena confrontare

XPL Integrator
XPL Integrator

Turner Construction Co • Stati Uniti

In loco
USD 42.000 - 64.000
xPL Production Manager
xPL Production Manager

Turner Construction Company • Decatur (AL)

In loco
USD 65.000 - 85.000
xPL Welder I
xPL Welder I

Turner Construction Company • Decatur (AL)

In loco
USD 28.000 - 41.000
xPL Fabrication Crew Leader - 2nd Shift
xPL Fabrication Crew Leader - 2nd Shift

Turner Construction Co • Decatur (AL)

In loco
USD 65.000 - 95.000
Fabrication Production Leader: Safety, Throughput, & Team Growth
Fabrication Production Leader: Safety, Throughput, & Team Growth

Turner Construction Company • Decatur (AL)

In loco
USD 65.000 - 85.000
Manufacturing Quality & Supplier Performance Engineer
Manufacturing Quality & Supplier Performance Engineer

Turner Construction Company • Decatur (GA)

In loco
USD 80.000 - 110.000
xPL Structural Fitter II
xPL Structural Fitter II

Turner Construction Company • Decatur (AL)

In loco
USD 25.000 - 39.000
XPL Integrator
XPL Integrator

Turner Construction Company • New York (NY)

In loco
USD 25.000 - 44.000
xPL Manufacturing Engineer
xPL Manufacturing Engineer

Turner Construction Company • Decatur (GA)

In loco
USD 80.000 - 110.000
xPL Structural Fitter II
xPL Structural Fitter II

Turner Construction • Decatur (AL)

In loco
USD 28.000 - 39.000