QUALITY CONTROL INSPECTOR - NDT

Dassault Falcon Jet; Melbourne (FL); Hybrid; USD 59,000 - 69,000; Full time

Job summary

Dassault Falcon Jet in Melbourne, FL is seeking a full-time Quality Control Inspector / NDT to perform non-destructive testing (UT/ET/Penetrant) per NAS 410 and ensure airworthiness.

Qualified candidates will have a high school diploma, NDT training or diploma, FAA A&P or Repairman certificate, 3+ years NDT experience, NAS 410 Level II readiness, ASNT documentation, and strong written/verbal communication skills. Travel may be required.

Qualifications

• High school diploma or equivalent.
• NDT training or diploma or documented military experience in Ultrasonic Testing, Eddy Current or Penetrant methods.
• FAA A&P Certificate or Repairman Certificate under FAR Part 65.
• Minimum three years of NDT inspections experience incl UT, ET and Penetrant; capable of NAS 410 Level II.
• Documentation of ASNT certification/work history as required.
• Vision tested, 20/20 corrected per NAS 410.
• Excellent written and verbal communication skills.
• Passport for potential international travel.
• Experience/knowledge of airframe structures.

Responsibilities

• Maintains complete knowledge of the work scope.
• Performs non-destructive testing per manuals and instructions.
• Verifies data acceptable to FAA and approves return to service when authorized.
• Ensures documents meet regulatory requirements.
• Travel to locations to support work scope and training.
• Reports to the Responsible Level III on technical matters.
• Assists other employees in their qualification areas.
• Perform inspection of aircraft maintenance and alterations for quality and airworthiness.

Skills

NDT experience

Communication skills

Airframe structures knowledge

Passport for international travel

Education

High school diploma or equivalent

NDT diploma or training / military experience

FAA A&P or Repairman Certificate (FAR Part 65)

NAS 410 Level II readiness

ASNT certification documentation

Vision tested (20/20)

Job description

Dassault Falcon Jet is building a state-of-the-art flagship Maintenance, Repair and Overhaul (MRO) facility at the Melbourne Orlando International Airport (KMLB) in Melbourne, Florida. Dassault Falcon Jet will serve customers across North and South America and beyond, the complex will accommodate all current Falcon models, (including the new, ultra-long-range Falcon 10X, the largest purpose-built business jet), and will be capable of performing major maintenance and modifications on up to 18 Falcon models.

Dassault Falcon Jet in Melbourne, FL is seeking a full time Quality Control Inspector / NDT for our Melbourne, Florida facility. The Quality Control Inspector / NDT will perform Quality Control Inspections and Level II NDT examinations in Ultrasonic Testing, Eddy Current and Penetrant Methods in accordance with NAS 410. In addition, this role will be responsible for performing inspection of aircraft maintenance and alterations for quality and airworthiness, providing the approval for return to service with respect to the work performed (if authorized), performing aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer’s aircraft.

MINIMUM REQUIRED QUALIFICATIONS:

• High school diploma or equivalent
• NDT technical courses, NDT Diploma, or documented Military experience in Ultrasonic Testing, Eddy Current or Penetrant methods
• Shall possess an FAA A&P Certificate or can possess an FAA Repairman Certificate from the FAA under FAR Part 65
• Minimum three (3) years’ experience relating to NDT Inspections and Evaluations to include Ultrasonic Testing, Eddy Current & Penetrant Methods. At a minimum, be capable of passing Level II examinations in Ultrasonic Testing, Eddy Current and Penetrant Methods in accordance with NAS 410
• Must be able to provide supporting documentation of previous work experience and certification as set forth by the American Society for Nondestructive Testing (ASNT)
• Pass vision testing, minimum 20/20 corrected in accordance with NAS 410
• Excellent written and verbal communication skills

ADDITIONAL QUALIFICATIONS:

• Valid Passport for potential international travel
• Previous experience / knowledge of airframe structures

PRINCIPAL DUTIES/RESPONSIBILITIES (ESSENTIAL FUNCTIONS):

• Maintains complete knowledge of the work scope
• Performs non-destructive testing per applicable maintenance manuals, procedures, and written instructions
• Verifies technical data acceptable to and/or approved by the FAA, has been used to provide inspection and approval for return to service with respect to work performed
• Ensures all documents and records meet regulatory requirements
• Ensures corrective action(s) provides for complete correction of discrepancy per Regulatory requirements
• Is responsible to Quality Assurance on all work performed
• Must be able to travel to locations other than Repair Station’s fixed location to support customer work scope and training
• Reports to the Responsible Level III on technical matters
• Adheres to general work and safety requirements
• Assists other employees in the performance of their duties with areas of qualification
• Perform inspection of aircraft maintenance and alterations for quality and airworthiness, providing the approval for return to service with respect to the work performed (if authorized)
• Perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer’s aircraft

NON-PRINCIPAL DUTIES/RESPONSIBILITIES (NON-ESSENTIAL FUNCTIONS):

• May perform inspection of aircraft maintenance and alterations for quality and airworthiness, providing the approval for return to service with respect to the work performed (if authorized)
• May perform aircraft maintenance (including inspection), preventive maintenance and alteration and assist customers with technical and operational support relative to the customer’s aircraft
• Other duties as assigned

WORKING CONDITIONS:

• Possible hangar and ramp environments with variable temperature range
• Possible extended hours and travel related to job duties
• Professional interaction with employees, customers and vendors
• Work in or near Industrial hazards
• Must be able to lift to 50 pounds with or without reasonable accommodation
• Must be able to walk long distances, climb, and kneel for extended periods of time with or without a reasonable accommodation
• Occasional travel required (up to 10%)

Compensation and Benefits

The compensation for this position typically falls between $43.00 and $50.00 per hour. This position is eligible for overtime. This position may be eligible for a sign on bonus, shift differential or relocation assistance.Note, the final compensation offered to a successful candidate will depend on several factors that may include but are not limited to the type and years of relevant experience, Falcon-specific experience, relevant education/certifications, geographic location, and shift.

Our total compensation package also offers comprehensive healthcare coverage (Medical/Prescription, Dental, Vision), HSA and FSA options, 401k Plan with Company Match, Life Insurance, Disability Benefits, Supplemental Insurance, Group Legal, Paid Time Off, Tuition Reimbursement, Employee Discounts and much more.

We are committed to finding the best, brightest and most dedicated individuals in the aviation industry. Our employees are the key to our success. Soar with us.

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.