QUALITY CONTROL INSPECTOR III (Aerospace/Defense)

The Marvin Group; Inglewood (CA); On-site; USD 70,000 - 90,000; Full time

Job summary

The Marvin Group, a defense contractor based in Southern California, seeks a Quality Inspector III to perform dimensional inspections and verify compliance with drawings using CAI tools such as CMMs and Verisurf. You will work with engineers and customers on aerospace programs.

Responsibilities include GD&T application, data analysis, and guidance to junior inspectors. This onsite role requires strong communication, math skills, and the ability to lift up to 35 lbs in a fast-paced lab

Qualifications

• High school diploma or GED.
• 5+ years of experience as a dimensional inspector.
• 3+ years operating CAI equipment (CMMs, Verisurf) at the operator level.
• Strong GD&T knowledge and application.
• Ability to read and interpret engineering drawings and specs with minimal supervision.
• Proficient in Word and Excel; good communication skills.
• Able to work independently and in diverse teams; lift up to 35 lbs; English fluent.

Responsibilities

• Perform independent inspections and verifications to ensure compliance with drawings and contracts.
• Use CAI equipment (CMMs, Verisurf) and surface plates for intermediate-level inspections.
• Operate different CAI devices like FARO/Romer arms, laser trackers, and video dim tools.
• Apply GD&T principles (Angularity, Profile, Runout, Symmetry, True Position).
• Compute true positions using basic algebra/trigonometry; analyze dimensional data.
• Communicate inspection results to engineers and management.
• Operate CAI programs/models as needed; support inspection planning.
• Conduct casting/forging layouts as required; mentor junior inspectors.
• Travel on source inspections to support quality needs.

Skills

5+ years dimensional inspection

CAI equipment operation

GD&T principles

Reading engineering drawings

Verisurf/CMM software

Basic algebra and trigonometry

Communication skills

MS Word and Excel

Team collaboration

Physical lifting (up to 35lbs)

Education

High school diploma or GED

College degree in Engineering (preferred)

Tools

Verisurf

CMMs

FARO / Romer arms

Laser trackers

Video dimensioning systems

Job description

Salary Is Based On Experience, Skills, And Education

This position is 100% onsite

The Marvin Group is a Strategic Partner for Global Alternate Mission Equipment and Sustainment

The Marvin Group, a leading defense contractor, plays a crucial role in the development and manufacturing of various systems for military aerospace and vehicles. Based in Southern California near the Los Angeles International Airport, The Marvin Group consists of Marvin Engineering (MEC), Marvin Test Solutions (MTS) and Marvin Land Systems (MLS). Marvin Engineering designs and produces military Alternate Mission Equipment. Marvin Test Solutions designs and manufactures armament Test Equipment. Marvin Land Systems specializes in the design and build of power and thermal management systems. For over 60 years we have maintained “A Tradition of Excellence”, serving as a trusted source for our unwavering commitment to supporting all branches of the Department of Defense and our global allies. Our collaboration extends across a diverse array of programs and platforms, including major military prime contractors such as Lockheed Martin, Northrop Grumman, and Raytheon.

Position Summary

Become a key contributor in ensuring precision and compliance at the highest level. As a Quality Inspector III, reporting directly to the Manager of Quality Control, you will perform dimensional inspections using advanced tools and techniques to verify that our products meet rigorous contractual and engineering standards. This role offers hands‑on experience with state‑of‑the‑art Computer‑Aided Inspection (CAI) equipment at the operator level, while supporting mission‑critical aerospace and defense programs through close collaboration with engineers, customers, and cross‑functional teams.

Key Responsibilities

• Perform independent inspections, validations, and verifications of hardware to ensure compliance with drawings and contractual requirements.


• Perform intermediate‑level inspections utilizing surface plate techniques and computer‑aided inspection (CAI) equipment USING CMM machine and Verisurf software at the operator level.


• Perform intermediate‑level inspections utilizing different CAI equipment like different FARO/Romer arms, laser trackers, and video dimensioning systems - at the operator level.


• Apply Geometric Dimensioning and Tolerancing (GD&T) principles including Angularity, Profile, Runout, Symmetry, and True Position.


• Use basic algebra and trigonometry to calculate true positions and perform dimensional analysis


• Interpret and communicate inspection results and issues to customers, engineers, and management


• Operate and interpret programs/models for CAI equipment as needed


• Perform casting and forging layouts as required


• Provide guidance and oversight to junior inspectors


• Conduct source inspections and travel in support of Marvin Engineering Company (MEC) quality needs

Required Qualifications

• High school diploma or GED


• Minimum 5 years of experience as a dimensional inspector


• Minimum 3 years of direct, hands‑on experience operating surface plates and Computer‑Aided Inspection (CAI) equipment such as CMMs (e.g., Verisurf) at the operator level.


• Strong understanding of GD&T principles and their practical application


• Ability to read and interpret engineering drawings, specifications, and contractual requirements with minimal supervision


• Proficiency in basic algebra and trigonometry


• Effective verbal and written communication skills


• Proficiency in Microsoft Word and Excel


• Ability to follow instructions and work independently


• Comfortable working in a diverse team environment


• Ability to lift up to 35lbs


• Fluent in English (speaking, reading, writing)

Preferred Qualifications

• College degree in Engineering or related technical field


• Certifications in GD&T, Quality Inspection, or relevant ASQ areas.


• Experience interpreting and using CAI programs and 3D models.


• Familiarity with advanced CAI systems such as Laser Trackers or Video Dimensioning tools.


• Experience performing casting and forging layouts


• Experience conducting source inspections


• Prior experience mentoring or training junior inspectors

Work Environment

• Medium-to-large inspection laboratory/machine shop environment


• Fast paced environment


• The noise level in the work environment is usually moderate

This position must meet export control compliance requirements. All applicants must be “U.S. persons” within the meaning of ITAR, as defined: a U.S. Citizen, a lawful permanent resident, political asylee, or refugee.

Visit us at https://http://marvingroup.com/

The Marvin Group is an EEO/Disability/Vets Employer.

Our company uses E-Verify to confirm the employment eligibility of all newly hired employees. To learn more about E-Verify, including your rights and responsibilities, please visit www.dhs.gov/E-Verify.

If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact People & Culture at 310.674.5030.