Quality Assurance and Control Engineer - New FAB Construction Department

TSMC; Austin (TX); On-site; USD 95,000 - 125,000; Full time

Benefits offered by this job

Medical, Dental, and Vision Plans

401(k) Retirement Savings Plan

Paid Time-Off

Job summary

TSMC Arizona is hiring a Quality Assurance and Control Engineer to oversee quality operations on the F21 FAB project in Phoenix, AZ. The role requires strong reliability, integrity, and collaboration with internal and external teams to ensure quality policies are implemented and followed.

The position emphasizes daily QC/QA oversight, procedures compliance, and coordinating with subcontractors to maintain robust quality controls and safety standards at the manufacturing site.

Qualifications

• Bachelor's degree in engineering or related field, or equivalent experience.
• 5 years of large project/construction management experience.
• In-depth knowledge of Construction Standards and Best Practices.
• Proficiency with Procore, Viewpoint, SharePoint, MS Office, Smartsheet, ACC, Bluebeam and BIM 360 Field.
• Knowledge of applicable codes and standards for industrial construction (prefers semiconductor).
• Experience interpreting and enforcing contract requirements, drawings, specifications and codes.

Responsibilities

• Monitor welding procedures to ensure compliance with ASTM, ASME, or AWS.
• Identify issues such as improper welding techniques or material defects.
• Visually inspect welds and fusions and verify adherence to procedures.
• Monitor and enforce three levels of inspection.
• Conduct daily observations and document results of inspections.
• Prepare quality management plans for specialized projects.
• Schedule and conduct pre-installation conferences.
• Chair and document weekly QC meetings with stakeholders.
• Oversee daily and weekly QC/QA reports to ensure conformance.

Skills

QA/QC processes

Construction standards

Procore

Viewpoint

SharePoint

MS Office

Smartsheet

Bluebeam

BIM 360

Education

Bachelor’s degree in Engineering

Tools

Procore

Viewpoint

SharePoint

MS Office

Smartsheet

Bluebeam

BIM 360 Field

Job description

Quality Assurance and Control Engineer

At TSMC Arizona, brilliance can ignite a world of innovation and launch a promising future. The world’s most brilliant innovators entrust us to transform their ideas into world-changing products that impact millions of lives. As long as you have the same passion to pursue excellence, you will find your fit here.

Quality Assurance and Control Engineer

TSMC Arizona is looking for Quality Assurance and Control Engineer to join our F21 FAB project located in sunny Phoenix, Arizona. As a Quality Assurance and Control Engineer, you will demonstrate a strong sense of reliability, enthusiasm, and will possess an attitude that embodies our core values – Integrity, Commitment, Innovation and Customer Trust.

The Quality Assurance and Control Engineer provides direction, coordination, guidance, and technical expertise in all areas of quality. Responsible for the overall daily operations of quality. Develops and administers quality related policies, procedures, techniques, initiatives, to ensure that all quality policies and practices are followed consistently on the project. Responsible for the overall daily operations of quality.

Responsibilities

• Monitor welding procedures to ensure compliance with industry standards such as ASTM, ASME, or AWS.
• Able to identify issues such as improper welding techniques, material defects, or insufficient weld penetration.
• Visually inspect the welds and fusions on fittings and joints and verify adherence to all manufacturer and client procedures.
• Monitor and enforce three level of inspection process.
• Conduct daily observations to ensure that all three level of inspection are undertaken and implemented as designed and document all results.
• Examine the work area to assure that all required work has been completed and is following the contract requirements and resolve any differences.
• Ensures that all work in place is in compliance with approved submittals and contract documents.
• Ensures that rework items are being corrected.
• Participates in activities to support the company's strategic planning efforts.
• Performs internal quality inspections and participates with IOR inspections.
• Performs submittal reviews and approvals for compliance with subcontract documents.
• Prepares quality management plans for specialized projects.
• Schedules and conducts pre-installation conferences.
• Supervises testing agencies and maintains records to ensure testing is performed per ASTM standards.
• Verifies materials meet contract specific requirements.
• Participate in Contractor Quality weekly Meetings.
• Chair and document weekly QC meetings with internal and external stakeholders (employer and subcontractors quality representatives) and external team members.
• Oversee daily and weekly QC/QA reports that reinforce activities that are being constructed in conformance with established standards.
• Demonstrate employer Core Values and Principles.
• Follow employer Code of Conduct.
• Responsible for refusing unsafe work and for carrying out all work in accordance with the employer Safety Procedures and Work Practices
• Report all incidents, near hits and hazards to management.
• Advise fellow employees of hazardous situations.
• Participate in workplace inspections.
• Participate in required and/or assigned training.
• Attend prestart and Safety meetings and contribute.
• Working knowledge of applicable regulatory requirements and AIA guidelines as applicable to design and construction field.
• Other related duties as needed and assigned by the Manager in support of the successful completion of the project.

Minimum Qualifications

• A graduate of a four-year accredited college or university program in one of the following disciplines: Engineering, Architecture, Construction Management, Engineering Technology, Building Construction, or Building Science; related field or equivalent combination of education and experience may be substituted for this requirement. Other relevant education, training or work experience may substitute for bachelor’s degree.
• 5 years of large project and construction management experience preferred with strong results in meeting deadlines and cost requirements.
• In-depth knowledge of the Construction Standards and Best Practices
• Computer skills using Procore, Viewpoint, SharePoint, MS Office, Smartsheet, ACC, Bluebeam and BIM 360 Field.
• Must have knowledge of the applicable codes and standards for industrial construction, with a preference for semiconductor industrial experience.
• Candidate should have knowledge of ASME B31.3, NFPA 70, NFPA 54 and IBC Chapter 17 as well as general knowledge of other applicable codes and standards.
• Have experience with interpreting and enforcing contract requirements, drawings, specifications and applicable codes.

Preferred Qualifications

• USACE Construction Quality Management certificate
• CWI certification.
• ANST II certification.
• ICC certification.

Personality Characteristics

• Highly enthusiastic and interested in semiconductor manufacturing facility construction.
• Possess independent thinking, research, and operational abilities.
• Ability to innovate, think quickly, and align with key stakeholders to provide solutions.

Physical Requirements

• May spend extended hours working inside and outside in all weather conditions, and in awkward body positions which can cause physical discomfort and strain.
• Required to regularly lift up to 50 lbs and to adjust heavy objects.
• The position will come in contact with sharp, hot, and cold equipment, and parts.
• Must be medically qualified to wear a personal respirator.
• Sensory demands include exposure to the smells associated with industrial chemical operations, exposure to the sounds associated with powered tools and industrial equipment.
• Must have the ability to safely climb ladders, and work at elevation from ladders, scaffolding, lifts, roofs, or platforms, and the ability to work in confined spaces.

Work Location

5088 W. Innovation Circle, Phoenix, AZ 85083

Candidates must be willing and able to work on-site at our Phoenix Arizona facility.

Standard work hours: Monday through Friday 8:00 AM to 5:00 PM or 9:00 AM to 6:00 PM

Application Consideration Consent

By applying to this position, I acknowledge and agree that my application and qualifications may be considered for other roles within the company. However, I reserve the right to withdraw my consent for future consideration of other roles within the company at any time.

Benefits

As a valued member of the TSMC family, we place a significant focus on your health and well-being. When you are at your best—physically, mentally, and financially—our company thrives. TSMC offers a comprehensive and competitive benefits program that includes:

• Medical, Dental, and Vision Plans: Choose the options that best fit your and your family’s needs.
• Income-Protection Programs: Financial assistance during injury or illness.
• 401(k) Retirement Savings Plan: Secure your financial future with competitive employer contributions.
• Paid Time-Off Programs and Holidays: Recharge and spend quality time with loved ones.

TSMC is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic.

We encourage all qualified individuals to apply and welcome applications from diverse backgrounds and experiences. Candidates must be able to perform the essential functions of the job with or without reasonable accommodation. If you need an accommodation as part of the application process, please contact [e-mail].

TSMC Arizona maintains the right to change or assign other duties to this position

All offers of employment are contingent upon the successful completion of TSMC Arizona’s pre-employment screening process. This process may include verifying the candidate’s identity, confirming legal authorization to work in the offered position's location, educational background and a comprehensive background check, where permitted by local regulations.