QC Technician - 1st Shift

LaMotte Company

Chestertown (MD)

On-site

USD 28,000 - 32,000

Full time

12 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Paid time off
Employer-provided health insurance
401(k) with company match

Job summary

LaMotte Company in Chestertown, MD seeks a Quality Control professional for full-time on-site work. You will handle daily testing standards, perform start-up and hourly disk tests, and conduct physical/vacuum assessments of disk products, while interpreting data and adjusting reagents as needed.

You will also tackle customer complaints, participate in Lean activities, and cross-train across QC functions, with strong emphasis on safety, accuracy, and teamwork at a 100+ year-old water analysis

Qualifications

  • High school chemistry or general lab work experience required.
  • Experience with SPIN meters, pH meters, volumetric glassware, analytical balances.
  • Proficient in Microsoft Works and Excel.
  • Strong math and problem-solving skills.
  • Ability to work independently and in a team; overtime may be required.
  • Ability to prioritize workload and meet deadlines.
  • Excellent communication with SPIN production, QC, and R&D.
  • Lift up to 40 lbs.

Responsibilities

  • Prepare standards and vats for daily testing of SPIN disks.
  • Conduct performance tests on startup and hourly disk samples.
  • Perform physical/vacuum testing on pouched disk products.
  • Interpret data and adjust reagents as needed.
  • Investigate customer complaints about SPIN products.
  • Float to other manufacturing areas as needed and cross-train in QC.
  • Participate in Lean activities (kaizen, 5S, DMAICs).
  • Notify supervisors of issues and assist in resolution.
  • Provide training needs feedback and seek further training.
  • Adhere to all company policies.

Skills

Math
Problem solving
Communication
Teamwork
Time management
Attention to detail
Independent & collaborative work

Education

High school chemistry or general lab experience

Tools

SPIN meters
pH meters
analytical balances
volumetric glassware
Microsoft Works
Excel

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Quality Control Full Time Chestertown, MD, US

2 days ago Requisition ID: 1076

Salary Range: $20.00 To $23.00 Hourly

Qualifications/Requirements:
  • Minimum requirement of high school chemistry or general lab work experience. Position requires handling chemicals, using volumetric glassware, analytical balances, pH meters and SPIN meters.
  • General computer knowledge and the ability to use Microsoft Works and Excel.
  • Excellent math (algebra) and problem-solving skills required.
  • Must be able to work both independently and as a team and work overtime as needed.
  • Must be able to prioritize workload and meet deadlines.
  • Excellent communication skills are a must. The position requires communication with SPIN production personnel as well as QC and R&D personnel.
  • Individual must be focused on task and not easily distracted.
  • Must be able to transport up to 40 lbs.
Duties/Responsibilities:
  • Responsible for preparing standards and vats used in the daily testing of SPIN disks.
  • Conducts performance tests on start-up and hourly disks samples.
  • Conducts physical/vacuum testing on pouched disk products.
  • Responsible for interpreting data and making reagent adjustments as needed.
  • Investigates customer complaints pertaining to SPIN products.
  • Floats to and works in other manufacturing areas as needed and will be cross trained in other QC functions.
  • Participates in Lean activities, including but not limited to:
    • Lean training and lean events such as kaizen or a 5 day event.
    • 6 S program in QA/QC or other assigned areas.
    • DMAICs. Continuously looks for ways to improve both the department’s and own individual efficiencies and time management, as well as ways to improve any aspect of the Company’s operations, and develops and implements DMAICs accordingly.
  • Notifies Supervisors/Managers of any production, equipment, safety, personnel problems, etc., and cooperates in resolving such issues as well. For example, requests assistance when systems prevent the efficient performance of duties or when a system fails.
  • Provides Supervisors/Managers with feedback to determine where additional training would benefit and obtains additional training as necessary.
  • Assists in other department activities as needed.
  • Floats to and works in other manufacturing areas as needed.
  • Complies with all Company policies (ie. personnel, safety, etc.).
  • Performs other duties as assigned.
Environmental Factors/Physical/Mental Capabilities:

Works indoors in a temperature-controlled environment. Position requires handling various chemicals and occasionally working in a fume hood. Requires good judgment, good problem solving, communication and math skills as well as good color perception. Position requires walking, standing, sitting, and transporting up to 40lbs.

Qualifications/Requirements:
  • Minimum requirement of high school chemistry or general lab work experience. Position requires handling chemicals, using volumetric glassware, analytical balances, pH meters and SPIN meters.
  • General computer knowledge and the ability to use Microsoft Works and Excel.
  • Excellent math (algebra) and problem-solving skills required.
  • Must be able to work both independently and as a team and work overtime as needed.
  • Must be able to prioritize workload and meet deadlines.
  • Excellent communication skills is a must. The position requires communication with SPIN production personnel as well as QC and R&D personnel.
  • Individual must be focused on task and not easily distracted.
  • Must be able to transport up to 40 lbs.
Duties/Responsibilities:
  • Responsible for preparing standards and vats used in the daily testing of SPIN disks.
  • Conducts performance tests on start-up and hourly disks samples.
  • Conducts physical/vacuum testing on pouched disk products.
  • Responsible for interpreting data and making reagent adjustments as needed.
  • Investigates customer complaints pertaining to SPIN products.
  • Floats to and works in other manufacturing areas as needed and will be cross trained in other QC functions.
Miscellaneous:
  • Participates in Lean activities, including but not limited to:
    • Lean training and lean events such as kaizen or a 5 day event.
    • 6 S program in QA/QC or other assigned areas.
    • DMAICs. Continuously looks for ways to improve both the department’s and own individual efficiencies and time management, as well as ways to improve any aspect of the Company’s operations, and develops and implements DMAICs accordingly.
  • Notifies Supervisors/Managers of any production, equipment, safety, personnel problems, etc., and cooperates in resolving such issues as well. For example, requests assistance when systems prevent the efficient performance of duties or when a system fails.
  • Provides Supervisors/Managers with feedback to determine where additional training would benefit and obtains additional training as necessary.
  • Assists in other department activities as needed.
  • Floats to and works in other manufacturing areas as needed.
  • Complies with all Company policies (ie. personnel, safety, etc.).
  • Performs other duties as assigned.
  • cross training capabilities between value streams

Environmental Factors/Physical/Mental Capabilities:

Works indoors in a temperature-controlled environment. Position requires handling various chemicals and occasionally working in a fume hood. Requires good judgment, good problem solving, communication and math skills as well as good color perception. Position requires walking, standing, sitting, and transporting up to 40lbs.

About Us:

LaMotte Company, a 100+ year-old global industry leader in developing and manufacturing premier water analysis solutions, operating in Newark, DE, Chestertown, MD and Warwick, UK. Our products are used around the world to accurately, quickly, and conveniently test water in a multitude of applications.

LaMotte offers paid time off including vacation, sick leave, and paid holidays. Full-time employees, who regularly work at least 30 hours per week, are eligible for employer-provided insurance including health, dental, vision, disability, life insurance, and supplemental insurance. Full-time employees are eligible to contribute to our 401(k) plan with an employer match available.

LaMotte is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, age, disability, military status, genetic information, sexual orientation, or any other legally recognized protected basis under federal, state, or local laws.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Production Technician - 1st Shift 7am-315pm
Production Technician - 1st Shift 7am-315pm

Arthur H Thomas Company • Chestertown (MD)

On-site
USD 23,000 - 26,000
Paid time off
Health, dental, vision insurance
401(k) with employer match
Quality Director
Quality Director

Cannon Instrument Company • Newark (DE)

On-site
USD 150,000 - 190,000
Competitive pay and performance-based
Shift options: mornings, afternoons, e
Paid time off: vacation, sick leave, &
+3
Value Stream Manager
Value Stream Manager

LaMotte Company • Chestertown (MD)

On-site
USD 65,000 - 90,000
Paid time off
Health, dental, vision insurance
401(k) with employer match
Production Technician - Day Shift - Teams 1 & 3
Production Technician - Day Shift - Teams 1 & 3

Cannon Instrument Company • Newark (DE)

On-site
USD 50,000 - 65,000
Senior Quality Director - Multi-Site ISO 9001 Leader
Senior Quality Director - Multi-Site ISO 9001 Leader

Cannon Instrument Company • Newark (DE)

Hybrid
USD 150,000 - 190,000
Competitive pay and performance-based
Shift options: mornings, afternoons, e
Paid time off: vacation, sick leave, &
+3
Senior Scientist
Senior Scientist

LaMotte Company • Chestertown (MD)

Hybrid
USD 120,000 - 170,000
Production Technician - 1st Shift - TesTabs
Production Technician - 1st Shift - TesTabs

LaMotte Company • Chestertown (MD)

On-site
USD 23,000 - 26,000
Paid time off
Health, dental, vision insurance
401(k) with employer match
Director of Manufacturing Engineering
Director of Manufacturing Engineering

LaMotte Company • Newark (DE)

On-site
USD 120,000 - 190,000
Health insurance
401(k) with employer match
Paid time off
+1
Director of Manufacturing Engineering
Director of Manufacturing Engineering

Cannon Instrument Company • Newark (DE)

On-site
USD 150,000 - 190,000
Paid time off
401(k) with company match
Health insurance
+1
Production Technician - 1st Shift - TesTabs
Production Technician - 1st Shift - TesTabs

Cannon Instrument Company • Chestertown (MD)

On-site
USD 23,000 - 26,000
Paid time off
Health insurance
401(k) with company match
+1