QC Specialist

Therma LLC; Boise (ID); In loco; USD 60.000 - 80.000; Tempo pieno

Vantaggi offerti da questo lavoro

401(k) Plan with Company Match

Health & Welfare Benefits

Life and Disability Insurance

Time Off

Reimbursed travel expenses

Descrizione del lavoro

Therma LLC in Boise, ID is seeking a Quality Control Specialist to verify HVAC, plumbing, and mechanical systems from fabrication through field installation and turnover. You will inspect materials, verify drawings and welds, and maintain QC documentation to ensure project specifications are met.

The role requires attention to detail, weld inspection experience, and ability to work with fabrication, field, and BIM teams on site. Onsite work in Boise, ID is required.

Competenze

• 2+ years of quality control, weld inspection, mechanical fabrication, or construction experience.
• Experience with visual examination of welds, brazed or bonded joints, and fabricated materials.
• Working knowledge of welding and fabrication processes, drawings, weld symbols, and related documentation.
• Ability to perform dimensional and orientation verification using fabrication or spool drawings.
• Familiarity with visual examination tools such as fillet weld gauges, V-WAC gauges, or similar inspection tools.
• Strong attention to detail with the ability to identify and document quality issues.
• Strong written and verbal communication skills.
• Ability to work effectively with fabrication, field, project, and technical teams.
• Proficiency with Microsoft Office, including Word, Excel, Outlook, and PowerPoint.

Mansioni

• Perform quality inspections of fabricated and installed mechanical systems, including HVAC, plumbing, piping, and related equipment.
• Inspect incoming materials and equipment for damage, defects, and compliance with project requirements.
• Perform dimensional and orientation checks against spool drawings, fabrication drawings, and project specifications.
• Inspect weld quality and verify fabricated spools meet applicable quality requirements.
• Conduct shop and field walkdowns, system verification, and planned inspections and testing throughout fabrication, installation, startup, and turnover.
• Verify that fabricated spools are properly identified, documented, protected, staged, and ready for shipment.
• Maintain accurate quality documentation, including inspection logs, test reports, RFIs, submittals, redlines/as-builts, weld logs, and related records.
• Help maintain material and component traceability from fabrication through field installation.
• Identify and document nonconforming work and assist with root cause analysis, corrective actions, and timely resolution.
• Support preparation of QA/QC documentation and project turnover packages.
• Coordinate closely with Fabrication, Field, Project Management, and BIM/VDC teams to address quality issues and maintain project schedules.
• Support inspections and audits involving customers, general contractors, vendors, third-party inspectors, and authorities having jurisdiction.
• Apply relevant project codes, standards, specifications, and established quality procedures.
• Provide regular quality updates and reports to appropriate project and quality leadership.

Conoscenze

Quality control

Welding inspection

Mechanical fabrication

Dimensional check

Documentation

Attention to detail

Communication skills

Team collaboration

MS Office

Formazione

AWS/ASNT certification

Strumenti

Weld gauges

Fabrication drawings

Descrizione del lavoro

Therma, a Legence company

For over 50 years, Therma (https://www.therma.com/) has continued to redefine the mechanical construction landscapes in California. Renowned for outstanding client service and attention to detail, we balance innovative, facility-specific solutions with a pragmatic, cost-conscious approach. Today, the firm employs more than 1,100 people in 3 regional offices, and its clients represent a diverse range of market sectors, including Biopharmaceutical, Education, Healthcare, Food & Beverage, Commercial, Industrial and Data Center facilities. Our culture is open, innovative, collaborative, and fun – all reflected in recognition of Therma as a #1 Best Place to Work on multiple occasions. We create an environment that empowers & challenges employees, giving them the greatest opportunity to succeed.

Quality Control Specialist

Therma | Boise, ID | Onsite

About the Role

Therma, a Legence company, is expanding our presence in the Boise market, and we’re looking for a Quality Control Specialist to help ensure the quality of our mechanical systems from fabrication through field installation and project turnover.

This is a hands‑on role for someone who takes pride in getting the details right. You’ll work closely with our fabrication, field, project, and BIM/VDC teams to inspect work, verify materials and documentation, identify potential quality issues, and help make sure our HVAC, plumbing, and mechanical systems meet project specifications and quality standards.

If you have a strong eye for detail, experience around mechanical fabrication and welding, and enjoy working alongside project teams to solve problems before they impact the job, this is a great opportunity to join Therma as we continue to grow in Boise.

What You’ll Do

• Perform quality inspections of fabricated and installed mechanical systems, including HVAC, plumbing, piping, and related equipment

• Inspect incoming materials and equipment for damage, defects, and compliance with project requirements

• Perform dimensional and orientation checks against spool drawings, fabrication drawings, and project specifications

• Inspect weld quality and verify fabricated spools meet applicable quality requirements

• Conduct shop and field walkdowns, system verification, and planned inspections and testing throughout fabrication, installation, startup, and turnover

• Verify that fabricated spools are properly identified, documented, protected, staged, and ready for shipment

• Maintain accurate quality documentation, including inspection logs, test reports, RFIs, submittals, redlines/as-builts, weld logs, and related records

• Help maintain material and component traceability from fabrication through field installation

• Identify and document nonconforming work and assist with root cause analysis, corrective actions, and timely resolution

• Support preparation of QA/QC documentation and project turnover packages

• Coordinate closely with Fabrication, Field, Project Management, and BIM/VDC teams to address quality issues and maintain project schedules

• Support inspections and audits involving customers, general contractors, vendors, third-party inspectors, and authorities having jurisdiction

• Apply relevant project codes, standards, specifications, and established quality procedures

• Provide regular quality updates and reports to appropriate project and quality leadership

Qualifications

Required

• 2+ years of relevant quality control, weld inspection, mechanical fabrication, or construction experience

• Experience with visual examination of welds, brazed or bonded joints, and fabricated materials

• Working knowledge of welding and fabrication processes, drawings, weld symbols, and related documentation

• Ability to perform dimensional and orientation verification using fabrication or spool drawings

• Familiarity with visual examination tools such as fillet weld gauges, V-WAC gauges, or similar inspection tools

• Strong attention to detail with the ability to identify and document quality issues

• Strong written and verbal communication skills

• Ability to work effectively with fabrication, field, project, and technical teams

• Proficiency with Microsoft Office, including Word, Excel, Outlook, and PowerPoint

• Ability to work in both fabrication shop and active construction environments as needed

Preferred

• AWS Certified Welding Inspector (CWI) or ASNT VT Level II certification

• Experience with mechanical HVAC, plumbing, piping, or process/utility systems

• Familiarity with applicable codes and standards such as IMC, IPC, SMACNA, AWS, and ASME

• Experience with QA/QC turnover documentation, material traceability, NCRs, and corrective action processes

• Experience working with BIM/VDC and fabrication teams in a mechanical construction environment

About Legence

Legence (https://www.wearelegence.com/) (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems—enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world’s most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients.

Benefits Overview

• 401(k) Plan with Company Match: Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting.
• Health & Welfare Benefits: Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage.
• Life and Disability Insurance: Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy up for additional coverage.
• Time Off: Flexible non-accrual vacation (separate from CA sick leave); company holidays per policy.
• Expenses: Business travel and related expenses reimbursed per company policy.

Reasonable Accommodations

If you need assistance or accommodations during the application or interview process, please contact us at [e-mail] or your dedicated recruiter with the job title and requisition number.

Employment Eligibility

Candidates must have current work authorization in the U.S.; visa sponsorship is not available for this position.

Pay Disclosure & Considerations

Where pay ranges are indicated, please note that a successful candidate’s exact pay will be determined based relevant job-related factors, including any of the following: candidate’s experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws.

Equal Employment Opportunity Employer

Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations.

EEO is the Law