QC Coordinator

Therma LLC; Boise (ID); On-site; USD 65,000 - 90,000; Full time

Benefits offered by this job

401(k) match

Health & Welfare Benefits

Life & Disability Insurance

Flexible time off

Travel expense reimbursement

Job summary

Therma, a Legence company, is seeking a Quality Control Coordinator in Boise to safeguard the quality of mechanical systems from fabrication through field turnover. This hands-on role partners with fabrication, field, project, and BIM/VDC teams to inspect work, verify materials, and ensure compliance with project specs.

You’ll perform weld and materials inspections, maintain quality records, support QA/QC turnover packages, and help drive root-cause analyses.

Qualifications

• 2+ years of relevant quality control, weld inspection, mechanical fabrication, or construction experience.
• Experience with visual examination of welds, brazed or bonded joints, and fabricated materials.
• Working knowledge of welding and fabrication processes, drawings, weld symbols, and related documentation.
• Ability to perform dimensional and orientation verification using fabrication or spool drawings.
• Familiarity with visual examination tools such as fillet weld gauges, V-WAC gauges, or similar inspection tools.
• Strong attention to detail with the ability to identify and document quality issues.
• Strong written and verbal communication skills.
• Ability to work effectively with fabrication, field, project, and technical teams.
• Proficiency with Microsoft Office, including Word, Excel, Outlook, and PowerPoint.
• Ability to work in both fabrication shop and active construction environments as needed.

Responsibilities

• Perform quality inspections of fabricated and installed mechanical systems, including HVAC, plumbing, piping, and related equipment.
• Inspect incoming materials and equipment for damage, defects, and compliance with project requirements.
• Perform dimensional and orientation checks against spool drawings, fabrication drawings, and project specifications.
• Conduct shop and field walkdowns, system verification, and planned inspections and testing throughout fabrication, installation, startup, and turnover.
• Verify that fabricated spools are properly identified, documented, protected, staged, and ready for shipment.
• Maintain accurate quality documentation, including inspection logs, test reports, RFIs, submittals, redlines/as-builts, weld logs, and related records.
• Help maintain material and component traceability from fabrication through field installation.
• Identify and document nonconforming work and assist with root cause analysis, corrective actions, and timely resolution.
• Support preparation of QA/QC documentation and project turnover packages.
• Coordinate closely with Fabrication, Field, Project Management, and BIM/VDC teams to address quality issues and maintain project schedules.
• Support inspections and audits involving customers, general contractors, vendors, third-party inspectors, and authorities having jurisdiction.
• Apply relevant project codes, standards, specifications, and established quality procedures.
• Provide regular quality updates and reports to appropriate project and quality leadership.

Skills

Quality control

Welding inspection

Dimensional verification

MS Office

Communication

Team collaboration

Detail oriented

Tools

Fillet weld gauges

Welding inspection tools

Job description

Quality Control Coordinator

Therma, a Legence company

Therma | Boise, ID | Onsite

About the Role

Therma, a Legence company, is expanding our presence in the Boise market, and we’re looking for a Quality Control Coordinator to help ensure the quality of our mechanical systems from fabrication through field installation and project turnover.

This is a hands-on role for someone who takes pride in getting the details right. You’ll work closely with our fabrication, field, project, and BIM/VDC teams to inspect work, verify materials and documentation, identify potential quality issues, and help make sure our HVAC, plumbing, and mechanical systems meet project specifications and quality standards.

If you have a strong eye for detail, experience around mechanical fabrication and welding, and enjoy working alongside project teams to solve problems before they impact the job, this is a great opportunity to join Therma as we continue to grow in Boise.

What You’ll Do

• Perform quality inspections of fabricated and installed mechanical systems, including HVAC, plumbing, piping, and related equipment

• Inspect incoming materials and equipment for damage, defects, and compliance with project requirements

• Perform dimensional and orientation checks against spool drawings, fabrication drawings, and project specifications

• Conduct shop and field walkdowns, system verification, and planned inspections and testing throughout fabrication, installation, startup, and turnover

• Verify that fabricated spools are properly identified, documented, protected, staged, and ready for shipment

• Maintain accurate quality documentation, including inspection logs, test reports, RFIs, submittals, redlines/as-builts, weld logs, and related records

• Help maintain material and component traceability from fabrication through field installation

• Identify and document nonconforming work and assist with root cause analysis, corrective actions, and timely resolution

• Support preparation of QA/QC documentation and project turnover packages

• Coordinate closely with Fabrication, Field, Project Management, and BIM/VDC teams to address quality issues and maintain project schedules

• Support inspections and audits involving customers, general contractors, vendors, third-party inspectors, and authorities having jurisdiction

• Apply relevant project codes, standards, specifications, and established quality procedures

• Provide regular quality updates and reports to appropriate project and quality leadership

Qualifications

Required

• 2+ years of relevant quality control, weld inspection, mechanical fabrication, or construction experience

• Experience with visual examination of welds, brazed or bonded joints, and fabricated materials

• Working knowledge of welding and fabrication processes, drawings, weld symbols, and related documentation

• Ability to perform dimensional and orientation verification using fabrication or spool drawings

• Familiarity with visual examination tools such as fillet weld gauges, V-WAC gauges, or similar inspection tools

• Strong attention to detail with the ability to identify and document quality issues

• Strong written and verbal communication skills

• Ability to work effectively with fabrication, field, project, and technical teams

• Proficiency with Microsoft Office, including Word, Excel, Outlook, and PowerPoint

• Ability to work in both fabrication shop and active construction environments as needed

Preferred

• AWS Certified Welding Inspector (CWI) or ASNT VT Level II certification

• Experience with mechanical HVAC, plumbing, piping, or process/utility systems

• Familiarity with applicable codes and standards such as IMC, IPC, SMACNA, AWS, and ASME

• Experience with QA/QC turnover documentation, material traceability, NCRs, and corrective action processes

• Experience working with BIM/VDC and fabrication teams in a mechanical construction environment

#LI-JS1 #LI-Onsite

About Legence

Legence (https://www.wearelegence.com/) (Nasdaq: LGN) is a leading provider of engineering, consulting, installation, and maintenance services for mission-critical systems in buildings. The company specializes in designing, fabricating, and installing complex HVAC, process piping, and other mechanical, electrical, and plumbing (MEP) systems—enhancing energy efficiency, reliability, and sustainability in new and existing facilities. Legence also delivers long-term performance through strategic upgrades and holistic solutions. Serving some of the world’s most technically demanding sectors, Legence counts over 60% of the Nasdaq-100 Index among its clients.

Benefits Overview

401(k) Plan with Company Match: Currently match contributions dollar-for-dollar up to 4% of eligible pay; immediate vesting.

Health & Welfare Benefits: Employer provided medical, dental, vision, prescription drug, Employee Assistance Program and accident & illness coverage.

Life and Disability Insurance: Employer provided basic life insurance and AD&D valued at 50K coverage amount with the option for voluntary buy up for additional coverage.

Time Off: Flexible non-accrual vacation (separate from CA sick leave); company holidays per policy.

Expenses: Business travel and related expenses reimbursed per company policy.

Reasonable Accommodations

If you need assistance or accommodations during the application or interview process, please contact us at [e-mail] or your dedicated recruiter with the job title and requisition number.

Employment Eligibility

Candidates must have current work authorization in the U.S.; visa sponsorship is not available for this position.

Pay Disclosure & Considerations

Where pay ranges are indicated, please note that a successful candidate’s exact pay will be determined based relevant job-related factors, including any of the following: candidate’s experience, skills, and qualifications, as well as geographic and market considerations. We are committed to ensuring fair and competitive compensation for all employees and comply with all applicable salary transparency laws.

Equal Employment Opportunity Employer

Legence and its affiliate companies are proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), marital or familial status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, other non-merit-based factors, and any other characteristic protected under applicable local, state or federal laws and regulations.

EEO is the Law