Propulsion Engineer III - Turbomachinery

Blue Origin

Washington

On-site

USD 95,000 - 120,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Relocation provided
Travel up to 20%

Job summary

Blue Origin Engines is seeking a senior mechanical design engineer to own the mechanical auxiliary and driveline systems that connect large-scale turbomachinery to the equipment it drives.

You will design shaft couplings, bearing integration, speed-reduction gear units, lubrication and seal systems, and mounting provisions, releasing drawings and models to enable hardware implementation.

Qualifications

  • Bachelor's degree in Mechanical Engineering or related field.
  • Minimum of 5 years of experience in mechanical design of rotating equipment or drivetrain hardware.
  • Proficiency in 3D CAD (NX, Creo, or equivalent) and engineering drawing release.
  • Working knowledge of GD&T (ASME Y14.5) and tolerance stack-up analysis.
  • Ownership of hardware through at least one full design, build, and test cycle.
  • Experience in cross-disciplinary engineering teams.
  • 7+ years of relevant industry experience.
  • Experience in aerospace.
  • MS in Mechanical Engineering or related discipline.
  • Experience integrating journal and thrust bearings into rotating machinery.
  • Experience with speed-reduction gear units for high-speed rotating equipment.
  • Experience with lubrication systems and seal support systems for rotating equipment.
  • Familiarity with API 671 and related rotating-equipment standards.

Responsibilities

  • Own the mechanical design of the auxiliary and driveline systems for large-scale turbomachinery development and testing.
  • Design and development of shaft couplings, bearing housings and integration, speed-reduction gear units, lubrication systems, seals, mounting, and structure.
  • Lead driveline architecture trades and document decisions and rationale.
  • Create and release drawings, 3D models, and specifications in CAD (NX or Creo) and Windchill.
  • Perform tolerance stack-ups, fit/clearance definitions, and alignment analysis.
  • Integrate bearing systems with housings, instrumentation provisions, and assembly.
  • Interface with vendors for interface control documents and technical alignment.
  • Coordinate with turbomachinery team on rotordynamics and bearing loads.
  • Contribute to detailed trade studies selecting optimal hardware.
  • Support build, alignment, and testing; disposition non-conforming hardware.
  • Develop design requirements and contribute artifacts to gated reviews.

Skills

Rotating equipment design
Leadership
Cross-functional teamwork
Ownership mindset

Education

Bachelor's in Mechanical Engineering
MS in Mechanical Engineering

Tools

NX
Creo
Windchill

Job description

Full-time On-site 1mo ago Posted 58 days ago. It may already be filled.

Requirements
  • Bachelor's degree in Mechanical Engineering or a related field.
  • Minimum of 5 years of experience in the mechanical design of rotating equipment or drivetrain hardware (couplings, bearings, gear units, shaft systems, or comparable rotating-machinery mechanical systems).
  • Proficiency in 3D CAD (NX, Creo, or equivalent) and engineering drawing release.
  • Working knowledge of Geometric Dimensioning and Tolerancing (GD&T, ASME Y14.5) and tolerance stack-up analysis.
  • Demonstrated ownership of hardware through at least one complete design, build, and test cycle.
  • Experience working in cross-disciplinary engineering teams.
  • A track record of taking ownership, showing resilience in the face of challenges, and consistently delivering results.
  • 7+ years of relevant industry experience.
  • Experience working in aerospace.
  • M.S. in Mechanical Engineering or a related discipline.
  • Experience integrating journal and thrust bearings (tilting-pad and other fluid-film types) into rotating machinery.
  • Experience with speed-reduction gear units for high-speed rotating equipment (e.g., AGMA 6011 / API 613 class gear drives).
  • Experience with lubrication systems and seal support systems for rotating equipment.
  • Familiarity with applicable rotating-equipment industry standards (e.g., API 671 co
Additional Information

Application close date:Applications will be accepted on an ongoing basis until the requisition is closed.At Blue Origin, we envision millions of people living and working in space for the benefit of Earth. We're working to develop reusable, safe, and low-cost space vehicles and systems within a culture of safety, collaboration, and inclusion. Join our team of problem solvers as we add new chapters to the history of spaceflight!This role is part of the Blue Origin Engines business unit, where our focus is the design, development, manufacturing, and testing of engines and propulsion systems. Built for multiple uses, our family of engines is powering the next generation of rockets for commercial, civil, national security, and human spaceflight.As part of our hardworking team of engineers, you will design the mechanical auxiliary and driveline systems that connect our large-scale turbomachinery to the equipment it drives. You will own the design of shaft couplings, bearing integration, gear units, lubrication and seal support systems, and structural mounting - creating and releasing the drawings and models that turn architecture into hardware. This position is integral to the success of our missions and requires strong rotating-equipment mechanical-design fundamentals.We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required!Special MentionsRelocation providedTravel expected up to 20%

Responsibilities include but are not limited to:

  • Own the mechanical design of the auxiliary and driveline systems supporting large-scale turbomachinery development and testing
  • Responsible for design and development of shaft couplings, bearing housings and integration, speed-reduction gear units, bearing fluid lubrication systems, seal support systems, mounting and structural support systems - from concept through hardware implementation and test.
  • Lead the driveline architecture trades: rigid versus flexible coupling, direct drive versus an intermediate / quill shaft with its own bearings versus a reduction gear unit; document the decisions and their rationale.
  • Create and release engineering drawings, 3D models, and specifications in CAD (NX or Creo) and the PLM system (Windchill), applying GD&T per ASME Y14.5.
  • Perform and direct tolerance stack-ups, fit / clearance definition, and alignment analysis for the rotating-equipment train.
  • Integrate the bearing system into the driveline design - housings, fits, instrumentation provisions, and assembly - in close collaboration with bearing subject-matter experts.
  • Serve as the prime mechanical-design interface to external vendors (coupling, bearing, gear-unit, and driven-equipment suppliers): own the interface control documents, evaluate proposals, and drive technical alignment.
  • Interface with the core turbomachinery team on rotordynamics and bearing loads so that coupling, bearing, and shaft-train requirements are correctly captured and met.
  • Contribute to detailed trade studies that result in selecting optimal mission-suitable subsystem hardware.
  • Support hardware build, assembly, acceptance testing, alignment, and anomaly investigation for auxiliary-systems components; provide engineering dispositions for non-conforming hardware.
  • Develop and maintain design requirements and documentation; contribute technical artifacts to subsystem and program gated reviews (SRR, PDR, CDR, MRR, TRR).
Your Match

How well this role fits your profile.

Confirmed H-1B sponsor. The Department of Labor record shows filings under BLUE CROSS BLUE SHIELD OF MICHIGAN .

Filings 535

Approved 88.8%

Avg wage $104K

From public Department of Labor LCA disclosures. Sponsorship history is a signal about the employer, not a commitment on this role.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Propulsion Engineer - Turbomachinery II
Propulsion Engineer - Turbomachinery II

Blue Origin • Huntsville (AL)

On-site
USD 99,000 - 139,000
Relocation provided
Travel up to 25% of the time
Propulsion Engineer II- Engine Integration
Propulsion Engineer II- Engine Integration

Blue Origin • Huntsville (AL)

On-site
USD 99,000 - 139,000
Stock options
Paid time off
Education support program
+1
Propulsion Engineer - Turbomachinery II
Propulsion Engineer - Turbomachinery II

Blue Origin • Seattle (WA)

On-site
USD 99,000 - 139,000
Relocation provided
Travel up to 25% of the time
Stock Options for regular employees
+1
Turbomachinery Tech Lead
Turbomachinery Tech Lead

Blue Origin • Seattle (WA)

On-site
USD 180,000 - 280,000
Relocation provided
Travel up to 25%
Turbo Product Team Lead
Turbo Product Team Lead

Blue Origin • Seattle (WA)

On-site
USD 151,000 - 211,000
Medical, dental, vision coverage
Stock options
Paid time off
+2
Propulsion Engineer III – Auxiliary Systems Design
Propulsion Engineer III – Auxiliary Systems Design

Blue Origin, LLC • Seattle (WA)

On-site
USD 121,023 - 169,432
Medical, dental, and vision insurance
Paid parental leave
401(k) with company match up to 5%
Propulsion Engineer - Turbomachinery II
Propulsion Engineer - Turbomachinery II

Blue Origin Personnel, LLC • United States

On-site
USD 99,000 - 139,000
Medical, dental, vision
401(k) with company match
Stock options
+1
Turbomachinery Mechanical Design Engineer
Turbomachinery Mechanical Design Engineer

Orbital Operations • Long Beach (CA)

On-site
USD 90,000 - 130,000
Propulsion Engineer - Thermo-Mechanical Analysis
Propulsion Engineer - Thermo-Mechanical Analysis

Blue Origin • Seattle (WA)

On-site
USD 121,000 - 169,000
Relocation provided
Stock options
Medical, dental, vision benefits
+1
Propulsion Engineer II
Propulsion Engineer II

Blue Origin • Seattle (WA)

On-site
USD 99,000 - 139,000
Medical, dental, vision
401(k) with company match
Paid time off
+2