Programmer

Exalta Group

Hunters Ridge (FL)

On-site

USD 34,000 - 55,000

Full time

15 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Exalta Group in Bonita Springs, Florida, is seeking a CNC Swiss Programmer to develop and optimize programs for Citizen Swiss-type lathes, using G-code and PartMaker, on the production floor.

You will translate drawings, select tools, set up first-article runs, troubleshoot issues, and collaborate with Quality and Engineering to improve cycle time and quality while maintaining safety standards on site.

Qualifications

  • 3-5 years of experience in CNC manufacturing and production machining.
  • Ability to read drawings, GD&T, and specifications.
  • Experience with PartMaker or similar Swiss CAM software.
  • Strong problem-solving and analytical skills.

Responsibilities

  • Develop, optimize, and debug CNC programs for Citizen Swiss-type lathes using G-code and CAM software (PartMaker).
  • Translate engineering drawings, GD&T, and specifications into efficient, repeatable machining processes.
  • Select cutting tools, collets, guide bushings, cutting toolpaths, feeds and speeds to maximize quality, cycle time, and tool life.
  • First-article setups, job prove-outs, and implementation of engineering changes.
  • Troubleshoot machining issues including chatter, dimensional instability, surface finish, and tool wear.
  • Meet or exceed quality, efficiency, and production targets in alignment with OEE standards.
  • Recommend process improvements to Programming Team to improve cycle time, quality, and overall performance.
  • Demonstrate on-machine programming expertise and support training and development of machinists and programmers.
  • Organize CNC programs, tooling, and documentation; create and maintain accurate setup sheets and program headers.
  • Collaborate with leadership and Quality to improve processes, tooling, fixtures, and overall manufacturing performance.
  • Set up and operate precision machining equipment as required to support production needs.
  • Monitor machine operation and screen data to identify and correct minor programming or process issues.
  • Attend required meetings and comply with all company policies, procedures and safety standards.
  • Perform other related duties as assigned.

Skills

CNC programming
G-code
PartMaker
GD&T
Troubleshooting

Education

High school diploma
Technical certificate in Machining

Tools

PartMaker
Swiss CNC lathes

Job description

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process.

Programmer

Bonita Springs, FL, US

3 days ago Requisition ID: 1659

Position Title:CNC Swiss Programmer

Department: Swiss Machining

Role Summary: The CNC Swiss Programmer is responsible for supporting CNC process optimization and continuous improvement while working closely with Production, Quality, and Engineering to meet safety, quality, delivery, and efficiency objectives. This is a hands-on role requiring regular presence on the production floor.

DUTIES AND RESPONSIBILITIES

  • Develop, optimize, and debug CNC programs for Citizen Swiss-type lathes using G-code and/or CAM software (Partmaker).
  • Translate engineering drawings, GD&T, and specifications into efficient, repeatable machining processes.
  • Select cutting tools, collets, guide bushings, cutting toolpaths, feeds and speeds to maximize quality, cycle time, and tool life.
  • First-article setups, job prove-outs, and implementation of engineering changes.
  • Troubleshoot machining issues including chatter, dimensional instability, surface finish, and tool wear.
  • Meet or exceed quality, efficiency, and production targets in alignment with OEE standards.
  • Recommend process improvements to Programming Team to improve cycle time, quality, and overall performance.
  • Demonstrate on-machine programming expertise and support training and development of machinists and programmers.
  • Organize CNC programs, tooling, and documentation; create and maintain accurate setup sheets and program headers.
  • Collaborate with leadership and Quality to improve processes, tooling, fixtures, and overall manufacturing performance.
  • Set up and operate precision machining equipment as required to support production needs.
  • Monitor machine operation and screen data to identify and correct minor programming or process issues.
  • Attend required meetings and comply with all company policies, procedures, and safety standards.
  • Perform other related duties as assigned.

Position Title:CNC Swiss Programmer

Department: Swiss Machining

Reports To: Lead Senior Programmer

Schedule: 2nd & Weekend shifts

Role Summary: The CNC Swiss Programmer is responsible for supporting CNC process optimization and continuous improvement while working closely with Production, Quality, and Engineering to meet safety, quality, delivery, and efficiency objectives. This is a hands-on role requiring regular presence on the production floor.

DUTIES AND RESPONSIBILITIES

  • Develop, optimize, and debug CNC programs for Citizen Swiss-type lathes using G-code and/or CAM software (Partmaker).
  • Translate engineering drawings, GD&T, and specifications into efficient, repeatable machining processes.
  • Select cutting tools, collets, guide bushings, cutting toolpaths, feeds and speeds to maximize quality, cycle time, and tool life.
  • First-article setups, job prove-outs, and implementation of engineering changes.
  • Troubleshoot machining issues including chatter, dimensional instability, surface finish, and tool wear.
  • Meet or exceed quality, efficiency, and production targets in alignment with OEE standards.
  • Recommend process improvements to Programming Team to improve cycle time, quality, and overall performance.
  • Demonstrate on-machine programming expertise and support training and development of machinists and programmers.
  • Organize CNC programs, tooling, and documentation; create and maintain accurate setup sheets and program headers.
  • Collaborate with leadership and Quality to improve processes, tooling, fixtures, and overall manufacturing performance.
  • Set up and operate precision machining equipment as required to support production needs.
  • Monitor machine operation and screen data to identify and correct minor programming or process issues.
  • Attend required meetings and comply with all company policies, procedures and safety standards.
  • Perform other related duties as assigned.
KEY SKILLS, KNOWLEDGE, AND COMPETENCIES
  • 3-5 years of experience in CNC manufacturing and production machining (preferred).
  • Strong time management, prioritization, and organizational skills to manage competing priorities effectively.
  • Proven ability to analyze, troubleshoot, and resolve machining and production issues.
  • Working knowledge of testing equipment, statistical methods, and control plans.
  • Strong mechanical aptitude with hands-on technical problem-solving ability.
  • Ability to work independently with minimal supervision while ensuring task completion.
  • Ability to read, interpret, and apply part drawings, GD&T, and internal and customer work instructions.
  • Knowledge of ISO 13485 and FDA 21 CFR 820 requirements as applicable to manufacturing environments (preferred).
  • Experience with PartMaker or similar Swiss CAM software preferred; training available for the right candidate.
  • Ability to adapt to changing priorities, production demands, and fast-paced environments.
  • Ability to set priorities that drive projects efficiently while meeting quality and customer requirements.

EDUCATION, CERTIFICATIONS, AND/OR LICENSES REQUIREMENTS

  • High school diploma or GED (Required).
  • Technical college degree or certificate in Machining, Manufacturing Technology, or related field (Preferred).
  • Relevant CNC, CAM, tooling, or process-development training (Preferred).
WORK ENVIRONMENT:
  • Work is performed primarily in a manufacturing environment with exposure to moving machinery, industrial noise, cutting fluids, metal chips, and oils.
  • Frequent interaction with CNC Swiss-type lathes, control panels, and manufacturing software.
  • Use of personal protective equipment (PPE) is required, including safety glasses, hearing protection, and safety footwear.
  • Work may require occasional overtime, off-shift, or weekend hours to support production demands, job launches, or critical issues.
  • Fast-paced production environment requiring attention to detail, safety, and quality.
  • Compliance with company safety policies, OSHA guidelines, and quality system requirements at all times.

PHYSICAL REQUIREMENTS:

  • Ability to stand and walk for extended periods throughout the production area.
  • Ability to lift, carry, and position tooling, fixtures, and materials within established safety limits.
  • Frequent use of hands for operating machine controls, measuring equipment, keyboards, and hand tools.
  • Ability to bend, stoop, kneel, reach, and climb as required for machine setup, inspection, and troubleshooting.
  • Visual acuity required for reading machine screens, prints, and measuring instruments.
  • Ability to work in close proximity to precision machinery and moving mechanical components.

Why Join EXALTA?

At EXALTA, we partner with leading medical technology companies to bring life-changing products to market. You will play a key role in building a culture of continuous improvement, enabling scalable growth, and helping deliver our mission: Together, we make MedTech better.

EXALTA is an Equal Opportunity Employer. We respect every employee as an individual, and we hire and promote based on qualifications, performance, and potential - without regard to race, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Programmer / Senior CNC Programmer
CNC Programmer / Senior CNC Programmer

EXALTA Group • Marquette (MI)

On-site
USD 70,000 - 90,000
6% 401(k) match
CNC Programmer / Senior CNC Programmer
CNC Programmer / Senior CNC Programmer

EXALTA Group • Michigan

On-site
USD 75,000 - 115,000
6% 401(k) match
Competitive benefits
Machinist I, II or III (Weekend Shift)
Machinist I, II or III (Weekend Shift)

EXALTA Group • Florida

On-site
USD 48,000 - 56,000
Senior CNC Mill Programmer (5-Axis)
Senior CNC Mill Programmer (5-Axis)

Exalta Group • Shimer (PA)

Hybrid
USD 85,000 - 120,000
Hybrid work flexibility
Machinist I, II or III (Weekend Shift)
Machinist I, II or III (Weekend Shift)

Exalta Group • Hunters Ridge (FL)

On-site
USD 42,000 - 60,000
Senior CNC Mill Programmer (5-Axis)
Senior CNC Mill Programmer (5-Axis)

EXALTA Group • Bethlehem

Hybrid
USD 70,000 - 120,000
Hybrid flexibility
Mentorship‑oriented culture
Modern machining technology
Swiss Set-up Operator 1st Shift
Swiss Set-up Operator 1st Shift

EXALTA Group • Kenosha (WI)

On-site
USD 39,000 - 47,000
CNC Programmer (swiss)
CNC Programmer (swiss)

LARC Staffing • Wilmington (MA)

On-site
USD 55,000 - 74,000
Up to $54/hour compensation
Unlimited overtime with double time on
3 weeks PTO
+1
Senior CNC Mill Programmer (5-Axis)
Senior CNC Mill Programmer (5-Axis)

EXALTA • Bethlehem

Hybrid
USD 90,000 - 120,000
Hybrid work flexibility
Machinist I, II or III (Weekend Shift)
Machinist I, II or III (Weekend Shift)

EXALTA • Florida

On-site
USD 36,000 - 60,000