Production Technician - Night Shift

WireCo WorldGroup; Chillicothe (MO); On-site; USD 44,000 - 48,000; Full time

Benefits offered by this job

Day One Benefits

401(k) Company Match

Monthly Incentive Program

Paid Time Off & Holidays

Life & Disability Insurance

EAP

Job summary

WireCo WorldGroup in Missouri is seeking a Production Technician to set up and operate wire drawing machines, position dies, thread wire, lubricate and start the line. You will inspect drawn wire with gauges and micrometers, record test data, and support quality and safety.

You must have a high school diploma or GED, basic math and reading skills, and the ability to use hand tools. Prior manufacturing experience and forklift or welder certification are a plus.

Qualifications

• High School Diploma, GED, or ability to demonstrate basic literacy and math proficiency
• Basic computer skills
• Possess math skills and mechanical aptitude.
• Must be able to learn to use and read micrometers, tape measures, feeler gauges, and basic hand tools.
• Must be able to stand/walk on concrete floors for 10-12-hour shifts.
• Must be able to push/pull, and lift up to 50 lbs.
• Must be able to work in extreme environmental conditions with temperatures ranging from 40-100+ degrees Fahrenheit.
• One to two years of experience in a manufacturing environment (preferred)
• Forklift Operator certification (preferred)
• Certified Welder certification (preferred)

Responsibilities

• Inspects machine and equipment used to ensure safe mechanical operation; perform maintenance and report problems
• Determines wire size and verifies dies; checks dies with micrometer for accuracy and replaces worn dies
• Checks wire size and adjusts die boxes to obtain proper cast and cuts test samples; gauges wire
• Repairs breaks and maintains equipment; ensures material is properly tagged and stored
• Loads/unloads materials, ensures proper packaging for shipment, and operates forklifts safely
• Monitors and maintains fluids and fuels; verifies quality and compliance with specs
• Performs safety inspections and maintains housekeeping in the area
• Supports other workers and passes down information to next shift
• Performs any other miscellaneous duties as assigned

Skills

Math skills

Mechanical aptitude

Basic computer skills

Education

High School Diploma or GED

Tools

Micrometers

Tape measures

Feel gauges

Hand tools

Forklifts

Job description

WireCo® is the strength behind the world’s evolution, through deep legacy and forward thinking, we create premium ropes that inspire innovation without limits. Our global footprint includes manufacturing plants, distribution facilities, and research and development centers around the world.

• Pay for Skills Program – Earn more as you learn! Increase your earning potential by completing skill-based training and becoming qualified on additional equipment and processes.
• Day One Benefits – Eligible full-time associates receive medical, dental, and vision coverage starting on their first day of employment.
• 401(k) – Save for your future with a company match after 90 days of employment.
• Monthly Incentive Program – Earn monthly incentive payments after successfully completing your 90-day probationary period.
• Paid Time Off & Paid Holidays
• Company-Paid Life & Disability Insurance
• Employee Assistance Program (EAP)

Job Description

The Production Technician sets up and operates one or more wire drawing machines. Positions and secures specified dies in the dieholder, using hand tools. Lifts coil of wire onto feed reel and threads it through dies. Coats wire with lubricant to facilitate the drawing machine and starts machine. Inspects and measures drawn wire to verify conformance to specified shape, size and resistance, using instruments such as wire gauges and micrometers, and replaces worn dies by using hand tools. Performs tensile strength and other tests and records test data on proper form.

The Production Technician must exhibit the behaviors of the WireCo Business System (WBS):

• Teamwork - welcomes an environment of inclusiveness and healthy debate that reflects our team’s strength
• Accountable – celebrates our successes, learn from failures, avoid excuses, and own the outcomes of our efforts
• Self-Aware – demonstrates an understanding of our strengths and needs, considering how our actions impact others
• Noble Intent – acts in the interests of others, approaching our work with integrity to ensure the best outcome
• Determined – takes initiative, share ideas and find solutions to win and achieve our goals
• Transparent – promotes open and honest communication and constructive feedback for clarity and truth
• Curious – seeks knowledge and outside input to test our way of thinking, challenging the status quo

Duties & Responsibilities

• Inspects machine and equipment used to ensure safe mechanical operation. Makes minor maintenance repairs and reports any maintenance or safety problems that require corrective action.
• Determines the size of wire to be run and verifies that machine dies are the correct sizes. Checks dies with micrometer for accuracy and replaces worn dies as needed. Checks rod or breakdown wire to conform with requirements and places in proper position on poles, stands, or flippers, using a forklift when necessary. Cuts tie wires, straightens tangled coils, and breaks down wire if a new setup is required; otherwise, welds the top of new material to the bottom of the material running out. Threads pointed end through die and around block in accordance with standard procedure or as directed by the Supervisor. Strings up the machine in prescribed manner.
• Checks wire size and adjusts die boxes to obtain proper castand cuts test samples. Gauges wire with micrometer, operates tensile and torsion machine to test samples, and records test data on form. Checks optical temperatures and wire speeds. Checks the weights of carriers or spools on special length jobs.
• Checks wire tolerances after each spool, respool, or coil and sample. Records wire diameters on appropriate paperwork.
• Repairs all breaks, exercising good judgment. Sets counter to prescribed count or standard setting. Changes heads, bonnets, pins and shafts, if necessary. Cleans water lines, steam nozzles, water jets, and water drains as needed. Maintains proper lubricants in all die boxes and replenishes as needed.
• Removes spool or coil from the machine, replaces empty spool, starts machine, and ties up bundle or spool. Ensures that all material is properly tagged and placed on proper pallets or skids.
• Checks machines, tools, and auxiliary equipment to be sure they are operating efficiently and safely. Performs minor maintenance to correct problems and ensures maintenance is notified of problems requiring corrective action.
• Regularly performs safety inspections in the area and corrects problems where possible. Reports other problems to maintenance or Supervisor for corrective action. Responsible for housekeeping in the area.
• Ensures all material is packaged according to customer specifications and is prepared for shipment. Loads and unloads trucks and keeps material in a neat and orderly manner. Inspects forklifts daily and logs inspection on proper form. Monitors and maintains proper fluid and fuel levels as required. Operates forklifts in a safe and orderly manner.
• Assures that finished products meet quality standards and specifications.
• Assists other employees in work group or other work groups as needed. Responsible for the pass down of operating information, problems, etc., to co-workers on the next shift.
• Performs any other miscellaneous duties as assigned.

Schedule:

• M, T, W — 5:00 p.m. to 5:00 a.m.
• Th, F — 7:00 p.m. to 7:00 a.m.

Compensation:

• $21.85/hour

+ Monthly Incentive Paymentsbased on meeting operational metrics after the 90-day probationary period is complete

Qualifications

Required Qualifications

• High School Diploma, GED, or ability to demonstrate basic literacy and math proficiency through education, experience, or assessment
• Basic computer skills
• Possess math skills and mechanical aptitude.
• Must have the ability to learn to use and read micrometers, tape measures, feeler gauges, and basic hand tools.
• Must be able to stand/walk on concrete floors for 10-12-hour shifts.
• Must be able to push/pull, and lift up to 50 lbs.
• Must be able to work in extreme environmental conditions with temperatures ranging from 40-100+ degrees Fahrenheit.

Preferred Qualifications

• One to two years of experience in a manufacturing environment.
• Must be able to be certified as a forklift Operator.
• Must be able to be certified as a Certified Welder.

Materials and Equipment Directly Used

• Strand and Wire rope of various diameters and lengths, on reels or in coils, empty or unassembled reels, paper lagging strips, tags, seizing wire, blocking, thimbles.
• Rewinding machines, stanchions, shafts, collars, bushings, rope cutters, measuring devise, fork trucks, banding equipment, welders, various hand tools.
• Personal protective equipment, including safety glasses, hearing protection, gloves, and steel-toed safety shoes.

Additional Information

• Must be legally authorized to work in the United States without restriction.
• Employment is contingent upon successfully completing a post-offer background check.
• An applicant must complete a satisfactory background check post-offer of employment. A criminal conviction will not be an automatic bar to employment.
• Must be willing and able to pass a post-offer drug screen and physical (if required)
• Must be 18 years of age or older.
• Equal Opportunity Employer/Veterans/Disability