Process Scaling Engineer - Photonics Manufacturing

Applied Materials

Santa Clara (CA)

Presencial

USD 147 000 - 203 000

Tempo integral

Há 3 dias
Torna-te num dos primeiros candidatos

Recebe uma resposta deste empregador

O teu currículo e carta de apresentação, adaptados exatamente ao que estão a contratar.

Ultrapassa os filtros ATS

Resumo da oferta

Applied Materials, Santa Clara, CA, is seeking a Process Engineer IV to lead the transfer of front-end thin-film and etch processes – PECVD, PVD, dry etch, and wet etch – to the manufacturing site. You will bring each process to a qualified, documented state ready for high-volume manufacturing and lead troubleshooting with site teams when it misbehaves.

The role emphasizes process transfer, metrology, data interpretation, and cross-functional collaboration with R&D, manufacturing and suppliers

Qualificações

  • Bachelor’s degree and 7–10 years of related process engineering experience in semiconductor, display or photonics manufacturing.
  • Hands-on development or sustaining of at least one of PECVD, PVD, or plasma etch; wet etch knowledge.
  • Metrology: thickness and refractive index, stress, defect inspection, etc.
  • Tool qualification and process transfer into a manufacturing environment: SPC, OCAP, FMEA, control plans, change control.
  • Design of experiments and statistical analysis; MES and fab data systems.
  • Failure analysis: SEM/XSEM, TEM, defect inspection and review, EDS.

Responsabilidades

  • Lead process transfer of deposition, dry etch, and wet etch through qualification and ramp within safety guidelines.
  • Build transfer packages with parameter rationale, hardware config, SOPs, OCAP, SPC limits, control plans and FMEA.
  • Qualify tools and chambers; define qualification data set and lead Tier 1–3 qualification.
  • Match sites and tools with criteria like thickness, refractive index, stress, uniformity, etch rate, CD, defects.
  • Lead root cause and corrective action on line stops and yield excursions; design DOE and perform failure analysis.
  • Qualify improvements by applying CIPs and new technologies for yield/cost through change control.
  • Train engineers and technicians in film-property measurement and data interpretation.
  • Work across teams with development, integration, manufacturing, quality, equipment, vendors; report findings.

Conhecimentos

Metrology
Design of experiments
Statistical analysis
Failure analysis
Problem solving
Cross-functional collaboration

Formação académica

Bachelor’s degree in Materials Science, Chemical Engineering, Physics, Electrical Engineering, Chemistry or a related field

Ferramentas

SPC
OCAP
FMEA
Control plans
Change control
SEM/XSEM
TEM
EDS

Descrição da oferta de emprego

Who We Are

Applied Materials is the global leader in materials science and engineering solutions that are at the foundation of virtually every new semiconductor chip and advanced display in the world. The equipment that we create and service is essential to advancing AI and accelerating the commercialization of next-generation semiconductor chips. Join us and push the boundaries of materials science and engineering in a company at the foundation of the electronics industry. The work we do together advances the world’s technology.

What We Offer

Salary: $147,000.00 - $202,500.00

Location: Santa Clara, CA

You’ll benefit from a supportive work culture that encourages you to learn, develop, and grow your career as you take on challenges and drive innovative solutions for our customers. We empower our team to push the boundaries of what is possible—while learning every day in a supportive leading global company.

At Applied Materials, we care about the health and wellbeing of our employees. We’re committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits.

As a Process Engineer, you'll play a crucial role in designing and optimizing manufacturing processes for display and semiconductor manufacturing technologies. You will collect and analyze data, perform hardware characterization, and troubleshoot engineering issues. You'll also measure film properties, generate technical documentation, and engage with customers to resolve concerns. Process Engineers collaborate with vendors and suppliers, and become familiar with implementing new technologies and products. You will experiment, learn, and collaborate with some of the brightest minds in the semiconductor and display industries, partnering with our globally recognized R&D teams on state-of-the-art research and development projects.

The Photonics Platforms Business manufactures and commercializes integrated nano-photonic devices, using semiconductor fabrication processes. Our Scaling team transfers processes into high-volume manufacturing.

We are looking for a Process Engineer IV to lead the transfer of front-end thin-film and etch processes – PECVD, PVD, dry etch, and wet etch and clean – to the manufacturing site. You will bring each process to a qualified, documented state ready for high-volume manufacturing, and lead troubleshooting with the site teams when it misbehaves. The role suits an engineer who has process transfer and metrology experience, and who finds root cause in the physics, chemistry and mechanics of the film or the etch.

Key responsibilities
  • Lead process transfer. Plan and execute the transfer of deposition, dry etch and wet etch processes through qualification and ramp, within safety guidelines: recipes, hardware configuration, process windows, and the reason behind each key parameter.
  • Build transfer packages that stand on their own. Recipes with parameter rationale, HW configuration, process specifications, SOPs, OCAP, SPC limits, control plans and FMEA,
  • Qualify tools and chambers. Characterize hardware, define the qualification data set, and lead Tier 1–3 qualification with the manufacturing teams.
  • Match sites and tools. Set and close matching criteria between sites, tools and chambers: thickness, refractive index, stress, uniformity, etch rate, CD, defects.
  • Lead root cause and corrective action on line stops, yield excursions and defect issues across multiple products. Rank hypotheses by mechanism, design a clean DOE, confirm with failure analysis (XSEM, TEM, defect review, EDS), and close with a documented corrective action.
  • Qualify improvements. Take process and hardware CIPs and new technologies for yield, throughput and cost through change control.
  • Train and guide. Train engineers and technicians in film-property measurement, and guide data interpretation, troubleshooting and issue resolution.
  • Work across teams. Partner with development, integration, manufacturing and quality teams, equipment groups, vendors and suppliers, and customers. Report status and technical findings clearly to engineers and management.
Required qualifications
  • Bachelor’s degree in Materials Science, Chemical Engineering, Physics, Electrical Engineering, Chemistry or a related field, with 7–10 years of related process engineering experience in semiconductor, display or photonics manufacturing. An advanced degree may count toward experience.
  • Hands-on development or sustaining of at least one of PECVD, PVD (including reactive sputtering) or plasma etch; working knowledge of wet etch and clean.
  • metrology: thickness and refractive index (ellipsometry or reflectometry), stress, defect inspection, etc.
  • Tool qualification and process transfer into a manufacturing environment: SPC, OCAP, FMEA, control plans, change control.
  • Design of experiments and statistical analysis; MES and fab data systems.
  • Failure analysis: SEM/XSEM, TEM, defect inspection and review, EDS.
  • Demonstrated conceptual and practical expertise in complex problem solving.
Preferred qualifications
  • Advanced optical metrology: building and validating ellipsometry dispersion models with interface and native-oxide layers; prism coupling; spectrophotometry; scatterometry/OCD; correlating optical models with cross-section data.
  • Optical thin films: control of refractive index, thickness and stress, and their effect on optical device performance.
  • Processing on glass or other non-silicon substrates: handling, clamping and charging, thermal limits.
  • Applied Materials deposition and etch platforms; single-wafer and batch wet benches.
  • Site-to-site transfer or new-fab start-up.
  • Waveguide, diffractive optics or photonic device manufacturing.
Additional Information

Time Type: Full time

Employee Type: Assignee / Regular

Travel: Yes, 25% of the Time

Relocation Eligible: Yes

The salary offered to a selected candidate will be based on multiple factors including location, hire grade, job-related knowledge, skills, experience, and with consideration of internal equity of our current team members. In addition to a comprehensive benefits package, candidates may be eligible for other forms of compensation such as participation in a bonus and a stock award program, as applicable.

For all sales roles, the posted salary range is the Target Total Cash (TTC) range for the role, which is the sum of base salary and target bonus amount at 100% goal achievement.

Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

In addition, Applied endeavors to make our careers site accessible to all users. If you would like to contact us regarding accessibility of our website or need assistance completing the application process, please contact us via e-mail at Accommodations_Program@amat.com, or by calling our HR Direct Help Line at 877-612-7547, option 1, and following the prompts to speak to an HR Advisor. This contact is for accommodation requests only and cannot be used to inquire about the status of applications.

Obtém a tua avaliação gratuita e confidencial do currículo.

ou arrasta e larga o ficheiro aqui.

Similar jobs

Ofertas semelhantes que vale a pena comparar

Process Engineer II - Office of the CTO
Process Engineer II - Office of the CTO

Applied Materials Inc • Santa Clara (CA)

Presencial
USD 100 000 - 137 000
Process Engineer II - Office of the CTO
Process Engineer II - Office of the CTO

Applied Materials, Inc. • Santa Clara (CA)

Presencial
USD 100 000 - 137 000
Process Integration Engineer
Process Integration Engineer

Applied Materials, Inc. • City of Albany (NY)

Presencial
USD 108 000 - 149 000
Process Engineer IV
Process Engineer IV

Applied Materials Inc • Santa Clara (CA)

Presencial
USD 147 000 - 203 000
Bonus program
Stock awards
Benefits package
Process Support Engineer IV
Process Support Engineer IV

Applied Materials Inc • Santa Clara (CA)

Presencial
USD 147 000 - 203 000
Process Engineer, Quality & Operations
Process Engineer, Quality & Operations

Applied Materials • Santa Clara (CA)

Presencial
USD 124 000 - 171 000
Product Engineer III
Product Engineer III

Applied Materials Inc • Santa Clara (CA)

Presencial
USD 124 000 - 171 000
Bonus program
Stock awards
Process Support Engineer III
Process Support Engineer III

Applied Materials Inc • Santa Clara (CA)

Presencial
USD 124 000 - 171 000
Process and Technology Engineer - (E3)
Process and Technology Engineer - (E3)

Applied Materials, Inc. • Tempe (AZ)

Presencial
USD 108 000 - 149 000
Process and Technology Engineer - (E3)
Process and Technology Engineer - (E3)

Applied Materials Inc • Tempe (AZ)

Presencial
USD 108 000 - 149 000