Process Engineer 1

creationtech; Albuquerque (NM); Presencial; USD 42.000 - 62.000; Jornada completa

Descripción de la vacante

Creation Technologies is seeking an Engineering 1 to support the setup, configuration, and optimization of manufacturing processes for CCAs and box assemblies. You will learn industry standards while performing routine engineering tasks under Engineering Management, gaining hands-on experience in electronics manufacturing.

The role emphasizes documentation, equipment support, and collaboration with quality, IT and suppliers to improve yield, efficiency, and process robustness.

Formación

• Bachelor's Degree in Engineering (Mechanical, Electrical, Industrial, Mechatronic or related) or equivalent.
• New graduates or candidates with up to 4 years of engineering support experience in electronics manufacturing preferred.
• Ability to interpret wiring diagrams and drawings effectively.
• Understanding of ISO9001/13485 or AS9100 quality standards.
• Understanding of New Product Introduction (NPI) and how to execute projects.
• Familiarity with Design for Assembly and Test tasks.
• Ability to follow detailed instructions and safety guidelines.
• Problem-solving mindset and attention to detail.
• Awareness of IPC standards, Lean concepts, Six Sigma, and ergonomics is a plus.
• Experience with CAD/CAM and programming is preferred.

Responsabilidades

• Set up and ensure process readiness of manufacturing processes, including equipment and tooling.
• Demonstrate foundational electronics principles within manufacturing services.
• Execute standard engineering projects and prototype tasks; perform routine technical work.
• Document manufacturing processes and procedures accurately.
• Maintain and troubleshoot equipment and tooling to minimize downtime.
• Support troubleshooting and repair of products as required.
• Collaborate with engineering, other functions, and 3rd party partners; communicate technical information clearly.
• Contribute to continuous improvement and process development initiatives.
• Participate in root cause analysis and corrective actions as needed.
• Provide technical training and support to manufacturing staff and interns if applicable.
• Assist with MFG and PCBA/box-build production processes and documentation.

Educación

Bachelor's Degree in Engineering

Herramientas

CAD/CAM software

CAM350

FactoryLogix

Descripción del empleo

POSITION DESCRIPTION:

Engineering 1 is a foundational role at Creation Technologies, focused on executing moderateto moderately complex engineering tasks required in the creation, configuration and optimization of industrialprocesses required to produce and/or test Circuit Card Assemblies (CCAs) and/or box assemblies. This entry-levelengineering position is crucial for those starting their career in electronics manufacturing services, providing anopportunity to apply theoretical knowledge in a practical setting while developing first areas of subject matterexpertise and learning industry standards and practices. This role supports engineering activities under the guidanceof Engineering Management. It’s a role that combines hands-on experience with professional growth, offering insightsinto manufacturing processes and a pathway for future advancement in the field.

REPORTING STRUCTURE:

Reports to Engineering Manager

DIRECT REPORTS (if applicable):

N/A

DUTIES AND RESPONSIBILITIES include, but not limited to:

• Engages in the setup and process readiness of manufacturing processes, including equipment & tooling,while ensuring optimal performance and adherence to safety standards.
• Demonstrates a foundational understanding of electronics principles and manufacturing services processes.
• Executes standard engineering projects and tasks, including prototype projects, and performs routinetechnical work within the engineering team, ensuring compliance with quality standards and that productsmeet customer required specifications and standards. Escalates issues as necessary.
• Engages in the documentation of manufacturing processes and procedures, ensuring accurate records andadherence to protocols.
• Aids in maintaining and/or troubleshooting the equipment, tools and tooling necessary for electronicmanufacturing processes, minimizing downtime, and maintaining production efficiency. Can support otherbusiness functions as required.
• Supports the troubleshooting and repair of products, as required.
• Collaborates effectively within the engineering team, other functions, and 3rd party partners, communicatingtechnical information clearly and contributing to operational goals.
• Supports continuous improvement / improved productivity efforts, by providing feedback on existingprocesses and participating in new process development.
• Supports root cause corrective and preventive actions as required.
• May provide guidance to interns and/or technicians.
• Process Engineering 1 Specific:
• Executes process engineering tasks and activities under the direction of Process Engineeringmanagement.
• Develops specific knowledge of aspects of the PCBA and/or box build process, including but notlimited to:
• SMT equipment, tooling, materials, and processes.
• Auto insertion, solder flow processes and cleaning processes
• Automated labelling, marking, conformal coating, potting and manual/auto assembly.
• Box build manufacturing techniques.
• Assists with the implementation, qualification and validation of new process technologies andequipment, ensuring seamless integration into production.
• Participates in the validation of process changes, documenting outcomes and adjusting proceduresas necessary.
• Perform Design for Manufacture / Assembly analysis with cross functional teams.
• Monitors key performance indicators (KPIs) and analyzes data to identify and resolve systemicprocess and performance issues.
• Contributes to continuous improvement initiatives for process optimization, cost reduction, andenhanced yield and quality.
• Participates in the research and evaluation of new process technologies and materials to enhanceproduction capabilities.
• Provides technical training and support to manufacturing trainers or personnel to improve overallcapabilities and knowledge.
• Supports PCBA & box-build production, as required, in routine matters.
• Assists in the documentation and maintenance of equipment, ensuring they are up-to-date andeffective, and aligned with product specifications. Uses Computerized Maintenance ManagementSystem.
• Manufacturing Engineering 1 Specific:
• Executes MFG engineering tasks and activities under the direction of Manufacturing Engineering management.
• Ability to work with and familiar with PLM and MES systems.
• Ensures the translation of customer requirements to assembly and test processes by Managing Bill
• of Materials (BOM), document control, and validates routing; supports New Product Introduction
• (NPI) and Engineering Change Order (ECO) processes.
• Engages in detailed manufacturing process documentation, including work instructions, as received
• from customer, and prepped for release to production floor.
• Create Assembly documents, Bill of Process and SMT/AOI Machine files (use of CAM350, FactoryLogix, or other MES and CAD/CAM software).
• Generate, and support the control, and distribution of manufacturing process documentationincluding Process Plans and Procurement specifications.
• Perform Design for Manufacture analysis with cross functional teams and reporting.
• Supports schedules for engineering projects, including coordinating tasks and resources for aboveschedule within the engineering team.
• Participates in cross-functional teams to support manufacturing process improvements to enhanceproduction efficiency and product quality.
• Supports the review and update of manufacturing procedures to ensure they are current andeffective.
• Provides technical support to the manufacturing team, aiding in the resolution of engineering issuesthat affect production and prevent continuous production flow.
• Monitors key performance indicators (KPIs) and analyzes data to identify and resolve systemicprocess and performance issues.

QUALIFICATIONS:

• Education and Required Experience
• Bachelor's Degree (4 year) in Engineering (Mechanical, Electrical, Chemical, Industrial, Mechatronic, or otherrelevant discipline) or a related field with a focus on electronics and manufacturing processes or equivalentindustry or military training experience.
• New graduates or candidates with up to 4 years of engineering support experience in electronicsmanufacturing preferred.

Skills Required

• Ability to interpret a variety of technical documents such as wiring diagrams and drawings effectively.
• Understanding of manufacturing processes and quality standards such as ISO9001/13485 or AS9100.
• Understanding of the concepts of New Product Introduction and how to execute projects includingsupporting functions.
• Understands and can execute Design for Assembly and Test tasks as required.
• Ability to follow detailed instructions and adhere to safety guidelines.
• Problem-solving skills and attention to detail.
• Capacity to learn and apply new skills in a dynamic manufacturing services environment.
• Awareness of IPC standards, Lean principles, six sigma and industrial ergonomics preferred.
• Proficient in using Computer systems and knowledge of CAD/CAM and programming preferred.
• Engineering project management and project leadership skills an asset.

WORKING ENVIRONMENT CONDITIONS

Physical and/or Mental Demands While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, orfeel office equipment, objects, tools, or controls. The employee is regularly required to stand; walk; reach with hands and arms; and occasionally stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10pounds, and occasionally up to 40 pounds. Specific vision abilities required by this job include close vision, color vision and identification, peripheral vision, depth perception, and the ability to adjust focus.

The physical demands described here are representative of those that must be met by an employee to successfullyperform the essential and non-essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Working Conditions The employee must wear designated PPE and/or electrostatic dissipative protection where required. Otherwise, office/business casual attire, consistent with site specific safety guidelines is appropriate. The working environmentis generally clean; however, this position may be exposed to occasional dust, metals/solder occasional exposure to high noise levels from operating machines or physical hazards from moving equipment and machine parts.

If you like wild growth and working with happy, enthusiastic over-achievers, you'll enjoy your career with us!

Creation Technologies is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

If you require any accommodations to complete the application process or need the job posting in an alternative format, please email [e-mail]. You will be connected with our Talent Acquisition team.

If you are contacted regarding the position, please inform our Talent Acquisition team of any accommodations you may need during the recruiting process. All information related to accommodation requests will be handled confidentially.

Canada: Title for the position will be in accordance with applicable national and local laws.