Process Development Engineer

Stone Plastics & Manufacturing

Zeeland (MI)

On-site

USD 80,000 - 110,000

Full time

6 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Stone Plastics & Manufacturing is seeking a Process Development Engineer to own sampling and process development for new molds, ensuring a proven, repeatable process before production release. You will partner with the Launch Engineer to turn tools into validated processes for Manufacturing to run on day one.

The role covers DOE planning, process validation, and close collaboration with Tooling, Metrology, Quality, and Production to achieve stable, documented processes and PPAP readiness.

Qualifications

  • Process Engineering degree preferred.
  • Associate's degree with 5 years of experience, or 10+ years of injection molding experience.
  • RJG Master Molder certification or equivalent training.
  • Hands-on experience setting up molding machines, hot runners, and auxiliary equipment (dryers, TCUs, and robotics).
  • Experience with DOE, Cpk/Ppk, and SPC; Minitab or similar statistical software a plus.
  • Ability to read prints and GD&T and interpret dimensional reports.
  • Experience supporting APQP, PFMEA, control plans, and PPAP.
  • Ability to communicate effectively with the Launch Engineer, Tooling, Metrology, Quality, and Production.
  • Systematic troubleshooting and problem-solving skills.
  • Self-starter able to work on tight launch timelines.
  • Understanding of Lean concepts (standardized work, problem solving, and set-up and scrap reduction).
  • Ability to mentor and develop others.

Responsibilities

  • Own sampling and process development for new molds, from DOE planning and first shots through the validation run.
  • Develop, optimize, and document robust molding and packaging processes, including the saved stable process and machine set-ups.
  • Resolve mold, process, and dimensional issues at the press with the Launch Engineer, Tooling, Metrology, and Quality, and verify tool corrections via follow-up sampling.

Skills

DOE planning
Statistical analysis
Minitab
Root cause analysis
Communication
Lean manufacturing

Education

Process Engineering degree
Associate's degree with 5 years experience
RJG Master Molder certification

Tools

Molding setup
Hot runners
Robotics
TCUs
Metrology equipment

Job description

Company Overview

Stone Plastics is a dynamic manufacturer specializing in advanced plastic molding solutions for a variety of industries, including automotive, furniture, recreation, construction, and appliances. Since our founding, we have grown rapidly by leveraging innovative automation and a relentless commitment to quality.

Job Overview

The Process Development Engineer exists to ensure every new mold is proven capable, stable, and repeatable before it is released to Production. As the technical owner of sampling and the molding process during launch, this role turns a new tool into a validated, documented process that Production can run right the first time. The Process Development Engineer partners with the Launch Engineer, who owns the overall launch and APQP template, and hands a fully proven process to the production Process Engineers.

Primary Functions
  • Own sampling and process development for new molds, from DOE planning and first shots through the validation run.
  • Develop, optimize, and document robust molding and packaging processes, including the saved stable process, machine set-ups, and mold documentation.
  • Resolve mold, process, and dimensional issues at the press with the Launch Engineer, Tooling, Metrology, and Quality, and verify every tool correction through follow-up sampling.
What Success Looks Like

The Process Development Engineer engages during launch planning, before the tool arrives. They support the Launch Engineer on feasibility and mold flow review, prepare the DOE plan, and make sure the press, material, and auxiliaries are ready. When the tool arrives they prep the mold (water lines, sprue, and nozzle tip) and run the RMT, then execute the DOE runs and analysis to establish the process window. The Process Development Engineer owns the molding process during launch: process parameters, cavity-to-cavity and run-to-run consistency, and the machine and peripheral equipment, including dryers, TCUs, hot runner controls, and robotics. They run the confirmation run (50 parts per cavity, 5 for layout), request the temporary master approval, and support capability, run-at-rate, and PPAP. They lead the packaging test, set up the workstation with Production, and confirm the final pack quantity in X2. They work with the Manufacturing Engineer, who owns EOAT, bulk density, and time studies, so the cell is set up as one complete package. When dimensional or cosmetic issues come up, the Process Development Engineer works at the press with the Launch Engineer, Tooling, Metrology, and Quality to find root cause and tell process issues apart from tool issues. After each tool adjustment they run the follow-up sample (including the 165-piece split) to verify the correction, and they report results to the Launch Engineer so the APQP Open Issues List and template stay current. At the capable-part and validation run they save the stable process, complete the machine, robot, and HAL set-ups, build the mold doc book, and support the PFMEA and control plan. At close they confirm cycle time against the quote and hand off to the production Process Engineers. Success means validated process sheets and set-up documentation that Production can run consistently: each mold is not simply sampled, but fully proven.

Desired Qualifications
  • Process Engineering degree preferred
  • Associate's degree with 5 years of experience, or 10+ years of injection molding experience
  • RJG Master Molder certification or equivalent scientific molding training
  • Hands-on experience setting up molding machines, hot runners, and auxiliary equipment (dryers, TCUs, and robotics)
  • Experience with DOE, Cpk/Ppk, and SPC; Minitab or similar statistical software a plus
  • Ability to read prints and GD&T and interpret dimensional reports
  • Experience supporting APQP, PFMEA, control plans, and PPAP
  • Ability to communicate effectively with the Launch Engineer, Tooling, Metrology, Quality, and Production
  • Systematic troubleshooting and problem-solving skills
  • Self-starter able to work on tight launch timelines
  • Understanding of Lean concepts (standardized work, problem solving, and set-up and scrap reduction)
  • Ability to mentor and develop others

This role requires regular and consistent attendance.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Process Development Engineer
Process Development Engineer

Stone Plastics and Manufacturing, Inc. • Zeeland (MI)

On-site
USD 85,000 - 125,000
Process Development Engineer
Process Development Engineer

Stone Plastics and Manufacturing • Zeeland (MI)

On-site
USD 90,000 - 130,000
Process Development Engineer – Molding Launch Specialist
Process Development Engineer – Molding Launch Specialist

Stone Plastics & Manufacturing • Zeeland (MI)

On-site
USD 80,000 - 110,000
Process Engineer
Process Engineer

Balda-C-Brewer • Ontario (CA)

On-site
USD 75,000 - 100,000
Mold Launch & Process Development Engineer
Mold Launch & Process Development Engineer

Stone Plastics and Manufacturing • Zeeland (MI)

On-site
USD 90,000 - 130,000
Injection Mold Process Development Lead
Injection Mold Process Development Lead

Stone Plastics and Manufacturing, Inc. • Zeeland (MI)

On-site
USD 85,000 - 125,000
Process Engineer
Process Engineer

Automatic Data Processing, Inc. • Ridgeway (SC)

On-site
USD 65,000 - 90,000
Plastic Injection Process Engineer
Plastic Injection Process Engineer

Keter • Anderson (IN)

On-site
USD 90,000 - 130,000
Medical
Dental
Vision
+5
Process Engineer
Process Engineer

Mekra-Lang-North-America,-LLC • Ridgeway (SC)

On-site
USD 70,000 - 100,000
Process Engineer - Injection Molding
Process Engineer - Injection Molding

Syntagma Group • West Virginia

On-site
USD 85,000 - 130,000