Principal Instrumentation & Controls (I&C) Engineer

Alta Resource Technologies, Inc.; Boulder (CO); On-site; USD 145,000 - 175,000; Full time

Benefits offered by this job

Flexible Time Off

Company Holidays

Job summary

Alta Resource Technologies seeks a Principal Instrumentation & Controls Engineer to lead design, operation, and maintenance across R&D and pilot plants, with potential for scale-up to commercial facilities. Role requires hands-on problem solving and technical leadership across chemistry, biology, operations and engineering.

Experience in chemicals/mining or biotech processes and ability to collaborate with EPCMs, vendors and multidisciplinary teams is essential.

Qualifications

• B.S. in Instrumentation, Electrical, Controls, or Chemical Engineering.
• 7+ years I&C experience in industrial/chemical processing; chemicals, petrochemicals, oil & gas, hydrometallurgical, mining, and/or biotechnology.
• Working knowledge of DCS/PLC platforms, field instrumentation selection and troubleshooting.
• Working knowledge of ladder logic, structured text and function blocks.
• Working knowledge of control loop tuning.
• Working knowledge of various industrial protocols including OPC UA, Modbus RTU/TCP, Serial, Ethernet/IP.
• Have demonstrated both hands-on experience and technical leadership.

Responsibilities

• Own operational support, maintenance, reliability, continuous improvement and design of all EIC and OT equipment and systems at R&D scale (pilot and demonstration scale plants).
• Provide hands-on technical support and troubleshooting for instrumentation, analyzers, controls, PLC/SCADA, electrical systems and other OT equipment and systems.
• Set up and manage PLC/SCADA, instrumented safety systems, alarm management and data historian.
• Create and manage maintenance strategies for EIC and OT equipment including sparing strategies, redundancy, availability and maintainability.
• Commission instrumentation and control systems on the demonstration plant including loop checks and calibration verification.
• Liaise with vendors for EIC commissioning activities; drive reliability initiatives and continuous improvement.

Skills

I&C experience

DCS/PLC platforms

Ladder logic & structured text

Control loop tuning

Industrial protocols (OPC UA, Modbus,

Education

B.S. in Instrumentation, Electrical, Controls, or Chemical Engineering

Tools

Rockwell Studio 5000

Ignition

DeviceNet

ControlNet

Profibus

Fieldbus

ISA/IEC standards knowledge

Job description

Principal Instrumentation & Controls (I&C) Engineer

Boulder, Colorado

About Alta

Alta Resource Technologies (Alta) is a next generation mining company that uses synthetic biology to separate critical minerals from conventional and unconventional resources, including e-waste. Founded in 2023, the company is expanding its team in Boulder, CO. The exponential growth of new tech industries, as well as the information technology sector, are driving historic growth in mineral demand and stressing existing supply streams. Meeting new demand, diversifying the supply chain, and producing minerals in a more sustainable manner requires the rapid development, deployment and scaling of new technologies. This mineral challenge represents a historic opportunity for technology development and value creation. Alta is proud to be at the vanguard of this mega trend.

Principal Instrumentation & Controls (I&C) Engineer

Reports to: VP Engineering

Role Summary

Alta is seeking a talented Instrumentation & Controls Engineer to join our growing Engineering and Operations team. This role will lead operational support, maintenance efforts and design efforts across all scales and projects, which include R&D activities, pilot plant operation, demonstration plant operation, and design of upcoming commercial plants. This role will help form the technical know-how and systems to Engineer Commercial Scale Plants and Licensing Packages. This role will be a key contributor to our innovation pipeline.

A successful candidate should have experience with equipment and process design in the Chemicals, Petrochemicals, Oil & Gas, Biotech, and/or Mining Process Industries; having worked for operating companies, EPCs and/or licensors. A successful candidate is one who can both jump in and troubleshoot problems on their own and also elevate to provide technical leadership and oversight over the discipline. There should be a strong desire to collaborate across disciplines including chemistry, biology, operations and engineering.

Key Responsibilities

Operational & Maintenance support of R&D Assets

• This role will own operational support, maintenance, reliability, continuous improvement and design of all EIC (Electrical, Instrumentation, Controls) and Operations Technology (OT) equipment and systems at R&D scale (pilot and demonstration scale plants)
• Provide hands on technical support and troubleshooting for instrumentation, analyzers, controls, PLC/SCADA, electrical systems and other Operations Technology (OT) equipment and systems
• Set up and manage all aspects of PLC/SCADA, instrumented safety systems, alarm management and data historian
• Create and manage maintenance strategies for all Instrumentation, Electrical, Controls and OT equipment including reactive and preventive maintenance strategies, sparing strategies, redundancy, availability and maintainability
• Commission instrumentation and control systems on the demonstration plant, including loop checks, calibration verification, improving instrumentation and troubleshooting EIC problems that are found during commissioning
• Liaise with and manage equipment vendors for EIC commissioning activities
• Drive reliability initiatives and continuous improvement through performance analysis and root cause investigations
• Configure and troubleshoot VFDs, control valves, actuators, and motor controls
• Support operations with loop tuning
• Liaison with EPC/EPCM to manage all EIC and OT related activities
• Lead vendor evaluation and engagement from EIC and OT perspectives
• Specify and size field instrumentation/analyzers (e.g. flow, level, pressure, temperature, density, pH, ORP, CEMS, BMS, conductivity etc.)
• Specify PLC/DCS/SIS requirements and the network architecture
• Develop design information such as control narratives, cause-and-effect matrices, instrument index, I/O lists, I&E schedules, loop diagrams, single-line diagrams and etc
• Develop company control systems strategies such as control system architecture selection, SIS requirements, level of automation, control room requirements, etc
• Develop company and Engineering standards for EIC and OT to support all commercial scale projects
• Lead FAT/SAT and loop checks during commercial plant construction and commissioning
• Coordinate electrical engineering activities on electrical equipment selection, sizing and development of specifications. Review grounding and hazardous area classification for field devices

Required Qualifications

• B.S. in Instrumentation, Electrical, Controls, or Chemical Engineering
• 7+ years I&C experience in industrial/chemical processing; chemicals, petrochemicals, oil & gas, hydrometallurgical, mining, and/or biotechnology
• Working knowledge of DCS/PLC platforms, field instrumentation selection and troubleshooting
• Working knowledge of ladder logic, structured text and function blocks
• Working knowledge of control loop tuning
• Working knowledge of various industrial protocols including OPC UA, Modbus RTU/TCP, Serial, Ethernet/IP
• Have demonstrated both hands-on experience and technical leadership

Preferred Qualifications

• Working knowledge of Rockwell Studio 5000, Logix family of controllers, and Ignition
• Working knowledge of DeviceNet, ControlNet, Profibus, Fieldbus etc.
• Chemical process control (Batch and ISA88)
• Industrial Cybersecurity (ISA99, IEC62443)
• Working knowledge of IEC-61511 (ISA-84)
• Experience supporting scale-up from lab/pilot to demonstration to commercial plant
• PE license a plus, not required
• Project Management capabilities

Early-stage capital project in front-end engineering; role requires flexibility across design, testwork support, and eventual commissioning as the project progresses through FID toward construction and startup.

Travel is required for partner meetings (EPCMs, vendors, others) and manufacturing site visits.

Compensation and Benefits

The starting pay range for this position is $145,000 - $175,000, commensurate with educational background and work experience.

Benefits include:

• Flexible Time Off
• Company Holidays

EOE

Alta Resource Technologies is an equal opportunity employer committed to building a workforce that reflects the diversity of the communities we serve. We believe that varied perspectives, experiences, and backgrounds strengthen our team and drive better outcomes for our clients and partners.

We welcome and encourage applications from all qualified individuals regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Our hiring decisions are based solely on qualifications, merit, and the needs of the business. Alta participates in e-Verify for all positions.

If you require accommodations at any point in the hiring process, please let your recruiter know.