Prin Engineer, Design Engineering (Onsite)

globalhr; Middletown (CT); Presencial; USD 108 000 - 205 000; Tempo integral

Vantagens oferecidas por esta oferta de emprego

Relocation Eligibility

Resumo da oferta

RTX's Compression Systems Engineering is seeking a mechanical design engineer in Middletown, CT. You will design across the full cycle for Fan/LPC and HPC components, support existing MCE fleets, and develop standard work with detailed layouts and documentation.

The ideal candidate holds a BS in Mechanical or Aerospace engineering with 8+ years of design experience, or an advanced degree with 5+ years. U.S. citizenship is required for data access.

Qualificações

• B.S. in Mechanical or Aerospace engineering with 8+ years of Mechanical Design experience.
• Advanced degree with 5+ years of experience.
• Experience with hardware, reading blueprints, and manufacturing methods.
• Experience with engineering standard work and with Class I and/or II EC process.
• U.S. citizenship is required to access information under this program/contract.

Responsabilidades

• Design support across all phases of the design cycle from preliminary to service.
• Support existing MCE fleets through enhanced component commonality and optimization.
• Expand repairability/maintainability for customers and MRO facilities.
• Develop common procedures, standard work, layouts, and supporting documentation.
• Review layouts, calculate component stack-up, and perform major cost studies.
• Coordinate with engineering to ensure project completion and provide technical leadership.

Conhecimentos

Mechanical Design

Aerospace Engineering

Reading blueprints

EC process I/II

US Citizenship

Formação académica

B.S. Mechanical/Aerospace engineering

M.S. Mechanical/Aerospace engineering

Ferramentas

Teamcenter

NX

Descrição da oferta de emprego

Date Posted: 2026-07-30

Country: United States of America

Location: US-CT-MIDDLETOWN-140 ~ Aircraft Rd ~ BLDG 140

Position Role Type: Onsite

U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of “U.S. Person” go here. https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.62

Security Clearance Type: None/Not Required

Security Clearance Status: Not Required

At RTX, the world largest aerospace and defense company, 185,000 great minds are united by purpose and inspired to make a difference solving the world’s most complex problems. With our three market leading businesses, world-class operations and investments in research and development, we offer capabilities and opportunity no one else can. Together, we push the boundaries of known science and find new ways to connect and protect our world.

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines and auxiliary power systems and has been revolutionizing modern flight for over 100 years. Join us and help shape the future of aerospace and defense.

What You Will Do

• Design support across all phases of the design cycle, preliminary through detailed design, validation, manufacturing, and operational service and will work on the designs of any component within the Fan/LPC and/or HPC modules (i.e. Rotors, airfoils, cases, frames, kinematics, etc…)
• Support the existing installed MCE fleets through enhanced commonality and optimization of components to ensure that the current and future needs of the business and customer are met.
• Expand repairability/maintainability for our customers and MRO facilities as well as work with quality clinics and related departments to support the test and verification of field issues
• Design and implements common procedures and standard work across the organization to optimize efficiency and quality. Also develop data and makes layouts, sketches, and notes necessary to present design proposals.
• Design and review layouts of components, calculate stack-up of detail components, and perform major cost studies consisting of new or existing details and/or marked prints and all supporting documentation, when necessary, to facilitate operations and ensure that established objectives and budgets are achieved.
• Resolve design problems of difficult-to-complex scope to ensure project completion as well as review completed layouts and drawings to ensure clarity, completeness, conformity to standards, procedures, specifications, and accuracy of calculations and dimensioning.
• Communicate with the other engineering personnel to coordinate the interrelated design and ensure project completion. Also, provide technical leadership on IPT’s and when required, assist in training less experienced engineers to help them diagnose and solve problems and build capabilities.

Qualifications You Must Have

• B.S. in Mechanical or Aerospace engineering with 8+ years of Mechanical Design engineering experience OR
• Advanced degree with 5+ years of experience
• Experience with hardware, reading blueprints, and manufacturing methods
• Experience with engineering standard work and with Class I and/or II EC process
• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract

Qualifications We Prefer

• M.S. in Mechanical or Aerospace engineering
• Good communication and interpersonal skills
• Experience with rotors
• Experience with fault tree investigation tool
• Proficiency in Teamcenter, NX

What We Offer

• Relocation Eligibility

Compression Systems Engineering (CSE)

Compression Systems Engineering is responsible for the design, development, and in service support of all fans low-pressure and high-pressure compressors for commercial and military engine models. CSE is responsible for the identification and maturation of new technologies for these products.

Technical disciplines in CSE include Project Engineering, Mechanical Design, Structural Analysis, and Product Definition.

Please ensure the role type defined below is appropriate for your needs before applying to this role. This position is classified as:

Onsite

Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attendselect steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

The salary range for this role is 107,500 USD - 204,500 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms

Click on this link to read the Policy and Terms