Precision Die Setter & Press Operator (Fin Line)

Baltimore Aircoil Company - USA

Dayton (TN)

Presencial

USD 30.000 - 41.000

Jornada completa

Hace 3 días
Sé de los primeros/as/es en solicitar esta vacante

Consigue una respuesta de este empleador

Tu currículum y tu carta de presentación, adaptados exactamente a lo que buscan contratar.

Supera los filtros ATS

Descripción de la vacante

Baltimore Aircoil Company – USA in Dayton, TN seeks a mechanically inclined press technician to set up and run mechanical and hydraulic presses, align dies to blueprints, thread coils, and tune feeders to spec. You will operate the line safely, monitor quality, and document output and downtime.

The role requires reading engineering drawings, using calipers and gauges, performing first-piece inspections, and coordinating with Maintenance, Quality, and Production to meet schedule.

Formación

  • Ability to read mechanical drawings and specifications.
  • Set up and operate hydraulic and mechanical presses to work instructions.
  • Align dies to drawings and verify setup before cycling.

Responsabilidades

  • Setup & operation: Execute press setups to engineering drawings and work instructions; operate and monitor throughout the run.
  • Die work: Install, remove, align, and secure dies using approved material-handling equipment; verify proper setup before cycling.
  • Coil line: Load, thread, align, and adjust feeders, straighteners, sensors, feed lengths, and line controls.
  • Adjustments: Set stroke, speed, tonnage, air pressure, shut height, feed settings, and die protection to meet spec.
  • Quality control: Perform first-piece and in-process inspections with calipers, micrometers, and gauges; identify nonconforming product.
  • Troubleshooting: Resolve press, tooling, material, feeding, sensor, and process issues; escalate as needed.
  • Maintenance basics: Inspect, clean, lubricate, and perform basic preventive maintenance; report wear, leaks, damage, or potential failures.
  • Performance & documentation: Meet output targets; complete production, inspection, setup, downtime, scrap, and rework records accurately.
  • 5S & teamwork: Maintain a clean, organized area; collaborate with Production, Quality, Maintenance, Tooling, and Material Handling; contribute to continuous improvement.
  • Compliance: Follow company policies, standard work, operating procedures, quality requirements, and environmental and safety standards.

Conocimientos

Die alignment
Press setup
Coil-fed equipment
Blueprints reading
Calipers/micrometers

Herramientas

Calipers
Micrometers
Gauges

Descripción del empleo

Are you the technician everyone calls when the press must run right now?If you can align a die to blueprint, thread a coil with confidence, and tune feed length and shut height until parts hit spec, you’ll feel at home here. Join us and live our values—Earning Trust, Embracing Responsibility, Showing Courage, and Driving Innovation—as we focus on doing the right thing in the right way.Impact you’ll haveKeep mechanical and hydraulic fin presses running safely and efficiently to schedule.Minimize changeover time, downtime, scrap, rework, and waste.Protect people and equipment through strict adherence to guarding, LOTO, PPE, and safe handling.Uphold quality standards with precise measurements and disciplined inspections.Your core responsibilitiesSetup & operation: Execute press setups to engineering drawings and work instructions; operate and monitor throughout the run.Die work: Install, remove, align, and secure dies using approved material-handling equipment; verify proper setup before cycling.Coil line: Load, thread, align, and adjust feeders, straighteners, sensors, feed lengths, and line controls.Adjustments: Set stroke, speed, tonnage, air pressure, shut height, feed settings, and die protection to meet spec.Quality control: Perform first-piece and in-process inspections with calipers, micrometers, and gauges; identify nonconforming product.Troubleshooting: Resolve press, tooling, material, feeding, sensor, and process issues; escalate to Maintenance, Tooling, Quality, or Production leadership as needed.Maintenance basics: Inspect, clean, lubricate, and perform basic preventive maintenance; report wear, leaks, damage, or potential failures.Performance & documentation: Meet output targets; complete production, inspection, setup, downtime, scrap, and rework records accurately.5S & teamwork: Maintain a clean, organized area; collaborate with Production, Quality, Maintenance, Tooling, and Material Handling; contribute to continuous improvement.Compliance: Follow company policies, standard work, operating procedures, quality requirements, and environmental and safety standards.What you knowMechanical and hydraulic presses, metal stamping processes, dies, and coil-fed equipment.Die installation, alignment, securing, and changeover procedures.Press controls, automation, die protection sensors, tonnage, stroke, air pressure, and related parameters.How to read blueprints, technical drawings, and work instructions; apply tolerances and specs.Precision measurement with calipers, micrometers, and gauges.Basic preventive maintenance and safe material handling, including cranes, forklifts, and electric carts.Machine guarding, LOTO, PPE, and basic computer skills for production systems.How you operateMechanically inclined problem-solver with high attention to detail.Safety- and quality-first mindset; quick to recognize and correct abnormalities.Effective communicator who functions well in a fast-paced setting and on cross-functional teams.Dependable, accountable, and committed to continuous improvement and on-time delivery.Nature & scopeUse technical judgment for setups, die changeovers, adjustments, troubleshooting, and quality verification. Work closely with Production, Quality, Maintenance, Tooling, and Material Handling to maintain safe, reliable equipment and consistent production. Escalate issues when additional expertise is needed.WORKING CONDITIONSThe physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The working environment includes lifting up to 50lbs. Standing is to be expected up to 80% of the time. Additional activities include walking, reaching, bending, stooping, and sitting. Fine hand manipulation of controls is needed as well as hand eye coordination to perform changes. Working hours can include any of three shifts and generally are scheduled for forty hours a week. Some weekend overtime is to be expected. Working temperatures include both wide fluctuations within the plant as well as ambient outside temperatures.You should be proficient incoil and feed-system setup experiencedie changeover experiencefin press mechanical technicianpreventative maintenance experiencepress control experience
Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Press Operator
Press Operator

Camaco LLC • EE. UU.

Presencial
USD 38.000 - 60.000
Press Maintenance Technician
Press Maintenance Technician

Camaco, LLC • Columbus (NE)

Presencial
USD 30.000 - 47.000
Machine Operator 2
Machine Operator 2

Camaco LLC • North Carolina

Presencial
USD 42.000 - 64.000
Press Maintenance Technician
Press Maintenance Technician

Camaco LLC • EE. UU.

Presencial
USD 60.000 - 90.000
Fin Press Mechanical Technician - 1st Shift
Fin Press Mechanical Technician - 1st Shift

Baltimore Aircoil Company • Dayton (TN)

Presencial
USD 52.000 - 72.000
Punch Press Die-Setting Operator (Level II)
Punch Press Die-Setting Operator (Level II)

Tempco Mfg - St. Paul Facility • Saint Paul (MN)

Presencial
USD 39.000 - 50.000
Punch Press Die-Setting Operator (Level II)
Punch Press Die-Setting Operator (Level II)

Tempco Manufacturing • Saint Paul (MN)

Presencial
USD 39.000 - 50.000
Machine Operator 2
Machine Operator 2

Camaco • Columbus (NE)

Presencial
USD 40.000 - 70.000
Die Setter
Die Setter

Camaco LLC • EE. UU.

Presencial
USD 42.000 - 65.000
Tooling Fabrication & Die Maintenance Specialist — Progressive Stamping
Tooling Fabrication & Die Maintenance Specialist — Progressive Stamping

CSS Metal Shaped Solutions • Farmington (CT)

Presencial
USD 39.000 - 52.000