Precision CNC Mill Setup Machinist — Aerospace Components

NE-XT Technologies

Windsor (CT)

On-site

USD 41,000 - 52,000

Full time

4 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

Health insurance
Dental insurance
Vision insurance
401(k) with company match
Paid holidays

Job summary

NE-XT Technologies, a precision manufacturer for aerospace and defense, seeks a skilled CNC Machinist to set up and run 3- to 4-axis milling machines in Windsor, CT. You will read engineering prints with GD&T, select tooling, adjust speeds/feeds, and verify programs for first articles and in-process parts.

You will collaborate with manufacturing engineering, programming, and quality to improve cycle time, tool life, and process capability while maintaining meticulous records and part

Qualifications

  • 3+ years setting up and operating CNC mills in precision manufacturing, or equivalent technical training/experience.
  • Proven ability to own complete machine setups (tooling, fixtures, offsets, adjustments).
  • Fluency reading engineering drawings and applying GD&T.
  • Hands-on skill with micrometers, calipers, bore and height gauges, and other metrology tools.
  • Strong understanding of cutting tools, speeds/feeds, and machining fundamentals; excellent troubleshooting ability.
  • Comfort following documented procedures, keeping accurate records, and working both independently and with a team.
  • Independent CNC programming is preferred but not required.

Responsibilities

  • Set up and run CNC milling machines independently to meet drawings, specs, and documented work instructions for aerospace parts.
  • Interpret engineering prints with GD&T and translate them to practical setups.
  • Select/install cutting tools, fixtures, and workholding; establish and adjust speeds, feeds, and both tool/work offsets.
  • Load, verify, and execute existing CNC programs; perform machine-level tweaks as authorized.
  • Complete first-article and in-process inspections using precision gauges; document inspection results and part traceability.
  • Monitor dimensions, finish, and quality; troubleshoot issues with tooling, fixturing, offsets, and machine behavior.
  • Collaborate with engineering, programming, and quality to resolve problems and drive continuous improvement.
  • Accurately maintain production and inspection records and part identification.
  • Perform routine care and preventive maintenance; follow all safety and quality procedures.

Skills

GD&T understanding
Attention to detail
Team collaboration
Reading prints
Troubleshooting
Independent work
CNC programming (preferred)

Education

Technical school education or machining certification

Tools

G-Code
CNC Setup & Changeover
Advanced inspection & gauge measurement
Okuma/DMG MORI experience
Haas machinery familiarity

Job description

A day in this role

You arrive to a clean, well-organized cell and a new aerospace component waiting on your bench. You review the print with tight GD&T, select the tooling and fixtures, dial in your work and tool offsets, verify the loaded program, and run a first piece. You measure with micrometers, calipers, bore and height gauges, make authorized adjustments at the control, and then scale to an efficient production run. Along the way you partner with manufacturing engineering, programming, and quality to improve cycle time and extend tool life.

About NE-XT Technologies

We are a precision manufacturer for aerospace and defense, producing complex, high-spec parts on advanced CNC equipment. Craftsmanship, accountability, teamwork, and continuous improvement define how we work at our Windsor, Connecticut facility.

Core responsibilities
  • Set up and run CNC milling machines independently to meet drawings, specs, and documented work instructions for aerospace parts.
  • Interpret engineering prints with GD&T and translate them to practical setups.
  • Select/install cutting tools, fixtures, and workholding; establish and adjust speeds, feeds, and both tool/work offsets.
  • Load, verify, and execute existing CNC programs; perform machine-level tweaks as authorized.
  • Complete first-article and in-process inspections using precision gauges; document inspection results and part traceability.
  • Monitor dimensions, finish, and quality; troubleshoot issues with tooling, fixturing, offsets, and machine behavior.
  • Collaborate with engineering, programming, and quality to resolve problems and drive continuous improvement.
  • Accurately maintain production and inspection records and part identification.
  • Perform routine care and preventive maintenance; follow all safety and quality procedures.
Minimum qualifications
  • 3+ years setting up and operating CNC mills in precision manufacturing, or equivalent technical training/experience.
  • Proven ability to own complete machine setups (tooling, fixtures, offsets, adjustments).
  • Fluency reading engineering drawings and applying GD&T.
  • Hands-on skill with micrometers, calipers, bore and height gauges, and other metrology tools.
  • Strong understanding of cutting tools, speeds/feeds, and machining fundamentals; excellent troubleshooting ability.
  • Comfort following documented procedures, keeping accurate records, and working both independently and with a team.
  • Independent CNC programming is preferred but not required.
Preferred
  • Aerospace/defense machining and familiarity with AS9100 practices.
  • Experience on 4-axis or 5-axis milling and platforms such as Okuma or DMG MORI.
  • Ability to read G-code and make basic edits; CAM programming exposure is a plus.
  • Background with first-article inspection, part traceability, and process improvement.
  • Technical school education or machining certification.
Tools & technologies
Proficiencies We Value
  • G-Code
  • CNC Machine Setup & Changeover
  • Advanced Inspection & Gauge Measurement
  • Machine Setups for Production Runs
Equipment You May Run
  • CNC Mill (3-4 axis VMC) (Haas, Okuma, Makino)
  • CNC Lathe (2-4 axis) (Haas, Okuma, Dmg Mori Seiki)
  • CNC Mill (5+ axis VMC) (Haas, Okuma)
  • CNC Lathe (5+ axis) (Okuma, Index, Dmg Mori Seiki)
Physical Requirements

Ability to stand and move around manufacturing equipment for extended periods; handle tools and precision components; and lift or move items up to 50 pounds as needed, using appropriate assistance or handling equipment. Essential functions may be performed with or without reasonable accommodation.

Compensation & Benefits

Hourly pay: $30.00-$38.00, based on experience and qualifications. Benefits include health, dental, and vision insurance; a 401(k) with company match; and paid holidays.

Why you'll like working here

Work with advanced CNC platforms on demanding aerospace applications in a quality-first, team-driven environment where your ideas to improve cycle time, tool life, and process capability are heard and implemented.

Location

Windsor, Connecticut

Equal Opportunity

NE-XT Technologies is an equal opportunity employer. Qualified applicants are considered without regard to legally protected characteristics. Reasonable accommodations are available throughout the application and employment process.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

CNC Milling Setup Machinist
CNC Milling Setup Machinist

NE-XT Technologies • Windsor (CT)

On-site
USD 41,000 - 52,000
Health insurance
Dental insurance
Vision insurance
+2
Machinist CNC Machine Setup
Machinist CNC Machine Setup

NE-XT USA • Windsor (CT)

On-site
USD 41,000 - 52,000
Health insurance
Dental insurance
Vision insurance
+2
CNC Milling Machine Operator – 2nd Shift
CNC Milling Machine Operator – 2nd Shift

NE-XT Technologies • Windsor (CT)

On-site
USD 32,000 - 44,000
Health insurance
Dental insurance
Vision insurance
+2
CNC Milling Machine Operator
CNC Milling Machine Operator

NE-XT Technologies • Windsor (CT)

On-site
USD 32,000 - 44,000
Health insurance
Dental insurance
Vision insurance
+2
Senior CNC Milling Setup Machinist 5-Axis Precision Parts
Senior CNC Milling Setup Machinist 5-Axis Precision Parts

Laborup • Waterbury (CT)

On-site
USD 85,000 - 110,000
Medical premiums 90%
Deductibles covered 100%
Dental and vision paid by company
+2
CNC Milling Machine Operator
CNC Milling Machine Operator

NE-XT USA • Windsor (CT)

On-site
USD 32,000 - 44,000
Health insurance
Dental insurance
Vision insurance
+2
Aerospace CNC Milling Setup Machinist (4/5-Axis)
Aerospace CNC Milling Setup Machinist (4/5-Axis)

NE-XT Technologies • Windsor (CT)

On-site
USD 41,000 - 52,000
Health insurance
Dental insurance
Vision insurance
+2
CNC Milling Setup Machinist
CNC Milling Setup Machinist

SST Direct • Windsor (CT)

On-site
USD 41,000 - 52,000
Health, dental and vision insurance
401(k) with company matching
Paid holidays
1st Shift CNC Mill Machinist
1st Shift CNC Mill Machinist

Leoforce • Winsted (CT)

On-site
USD 41,000 - 62,000
Day 1 Benefits Coverage
Medical, Dental, Vision
401(k) Program
+1
CNC Machinist
CNC Machinist

Northeast Tool & Manufacturing • Matthews (NC)

On-site
USD 34,000 - 44,000
Medical insurance
Dental insurance
Vision insurance
+3