Power Plant Maintenance Technician -Instrumentation, Controls and Electrical (IC&E)

Vistra Retail Operations Company

Morrisville (Bucks County)

On-site

USD 70,000 - 100,000

Full time

14 days+

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Vistra Retail Operations Company is seeking an Instrumentation, Controls and Electrical (IC&E) Maintenance Technician for a 1200 MW combined-cycle facility. You will perform routine and emergency maintenance on instrumentation, control, electrical and mechanical systems, ensuring safety and compliance with LOTO and other procedures.

The role requires 4–6 years in an industrial environment, high-voltage experience, and proficiency with GE Mark VI/GE RX3i and Allen-Bradley PLC systems.

Qualifications

  • Must possess a high school diploma or equivalent.
  • Experience with industrial electrical equipment troubleshooting.
  • 4–6 years in an industrial environment.
  • Knowledge of high voltage switching and relaying.
  • Experience with PM inspections and electrical/mechanical repairs.
  • Familiarity with instrumentation calibrations.
  • Ability to document maintenance history and ensure safety compliance.
  • Eligible for POSS/MASS program eligibility.

Responsibilities

  • Perform routine and emergency maintenance on plant instrumentation, control, electrical and mechanical systems with minimal supervision, including weekends and holidays when necessary.
  • Provide technical expertise for troubleshooting and resolution of plant instrumentation, control, electrical and mechanical systems issues.
  • Inspect, repair, install and remove motors, generators, transformers, switches, circuit breakers, MCCs, cabling, buswork and batteries, and work with electrical systems up to 4160 volts.
  • Tune and calibrate boiler controls to ensure safe and optimum boiler performance.
  • Calibrate turbine controls and valve actuators for safe and optimum turbine performance.
  • Maintain and calibrate all plant instrumentation to provide reliable operational information to operations and support personnel.
  • Document and maintain records of instrumentation, control, electrical and mechanical maintenance history.
  • Maintains CEMS in accordance with state and federal compliance guidelines.
  • Troubleshoot, diagnose and repair plant electronic, pneumatic systems, analyzers, facility computers, process control/PLC equipment and instrumentation.
  • Knowledge of power plant mechanical equipment and safety policies, especially LOTO and related procedures.
  • Experience in rotating equipment including pumps, seals, turbines, generators, bearings, gaskets, couplings and alignment.
  • Knowledge of heat recovery steam generators, piping systems and lubrication systems.
  • Locate, trouble-shoot, and adjust defects in mechanical equipment.
  • Ensure P&ID's are up to date and revisions where necessary.
  • Research and coordinate with vendors for parts procurement as needed.
  • Instrumentation and controls involving GE Mark VI, GE RX3i and Allen Bradley PLC systems.
  • Gain basic operational knowledge of plant systems and stand in as a BOP operator if needed.
  • Respond to unit trips and abnormal operating conditions; respond to emergencies.

Skills

Troubleshooting
Calibration
Electrical systems
Mechanical systems
PLC systems
Safety procedures

Education

High school diploma

Tools

GE Mark VI control systems
GE RX3i
Allen Bradley PLC

Job description

Job Summary

The Instrumentation, Controls and Electrical (IC&E) Maintenance Technician is responsible for the safe and efficient operation and maintenance of a 1200 MW combined cycle power generation facility utilizing GE 7FA combustion turbines and GE D11 steam turbines (GE Mark VI control systems). Candidate ensures strict adherence to safety, health and environmental procedures as they relate to plant operations and maintenance including but not limited to Lockout Tagout, Job Safety Analysis, Confined Space, Hot Work, Electrical Safety and PPE.

Job Description
Key Responsibilities :
  • Perform routine and emergency maintenance on the plant instrumentation, control, electrical and mechanical systems with minimum supervision, including scheduled shift in addition to weekends and holidays when necessary.
  • Provide technical expertise for troubleshooting and resolution of plant instrumentation, control, electrical and mechanical systems issues.
  • Inspect, repair, install and remove various types of motors, generators, transformers, switches, circuit breakers, motor control equipment, cabling, buswork and storage batteries, and work with electrical systems up to and including 4160 volts.
  • Tune and calibrate boiler controls to ensure safe and optimum boiler performance.
  • Calibrate turbine controls and turbine valve actuators for safe and optimum turbine performance.
  • Maintain and calibrate all plant instrumentation to provide reliable operational information to operations and support personnel.
  • Document and maintain records of instrumentation, control, electrical and mechanical maintenance history.
  • Maintains CEMS (Continuous Emissions Monitoring Systems) in accordance with state and federal compliance guidelines.
  • Troubleshoot, diagnose and repair plant electronic, pneumatic systems, analyzers, facility computers, process control/PLC equipment and instrumentation.
  • Knowledge of power plant mechanical equipment as well as safety policies and procedures, especially in the areas of LOTO, chemical handling, heavy equipment, rotating machinery, confined spaces.
  • Experience in the maintenance, repair, and installation of rotating equipment including pumps, mechanical seals, gas and steam turbines, generators, fans, bearings, gaskets, couplings, alignment, etc)).
  • Knowledge of heat recovery steam generators and related equipment, piping systems (valves, actuators, flanges, hangers, etc.), and lube oil, analysis, filtration & hydraulic oil systems
  • Must be able to locate, trouble-shoot, and adjust defects in mechanical equipment
  • Responsible for making sure that electrical and controls P&ID's are being kept up to date and make revisions where necessary.
  • Research and coordinate with vendors and site administrative staff for parts procurement as needed to repair instrumentation and electrical equipment
  • Instrumentation and controls involving GE Mark VI control systems, GE RX3i and Allen Bradley PLC systems
  • Required to gain a basic operational knowledge of the plant systems and operate the equipment within specifications. Will be able to stand in as a BOP operator if needed
  • Responds to unit trips and abnormal operating conditions to maintain plant equipment in a safe operating condition. Responds to emergent situations including call-outs and outages
Experience, Education and Skills :
  • Must possess a high school diploma or equivalent.
  • Demonstrated experience with industrial electrical equipment troubleshooting and maintenance.
  • 4-6 years' experience in industrial environment required.
  • Demonstrated knowledge in the use of proper procedures to clean electrical motors (DC and AC), make electrical connections on DC, single and three phase AC circuits, and perform "PM" inspections.
  • General knowledge and/or understanding of station high voltage switching and relaying equipment.
  • Demonstrated experience with general electrical and mechanical abilities for equipment repair, replacement, station mechanical operations and minor modification projects required.
  • General knowledge and/or understanding of Instrumentation calibrations
  • Demonstrated effective verbal/written communication skills.
  • All applicants must be a successful candidate on the Plant Operator Selection System/Power Plant Operations and Maintenance (POSS / MASS) program in order to be considered a candidate for this position. All communication concerning the testing is sent to the candidate's email address provided during the application process.
  • * Position can be filled at level I, II, III or IV depending on experience and skill.
Desired Qualifications:
  • Demonstrated experience maintaining electrical equipment up to 4160 V
  • Demonstrated experience maintaining 18 KV and 230 KV electrical equipment preferred.
  • Demonstrated experience maintaining, calibrating and tro
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Power Plant Maintenance Technician -Instrumentation, Controls and Electrical (IC&E)
Power Plant Maintenance Technician -Instrumentation, Controls and Electrical (IC&E)

Luminant • Morrisville

On-site
USD 85,000 - 110,000
Power Plant Maintenance Technician -Instrumentation, Controls and Electrical (IC&E)
Power Plant Maintenance Technician -Instrumentation, Controls and Electrical (IC&E)

Vistra Corp. • Morrisville

On-site
USD 80,000 - 110,000
Power Plant Maintenance Technician -Instrumentation, Controls and Electrical (IC&E)
Power Plant Maintenance Technician -Instrumentation, Controls and Electrical (IC&E)

TXU Energy • Morrisville

On-site
USD 90,000 - 120,000
Power Plant Instrumentation & Electrical Technician
Power Plant Instrumentation & Electrical Technician

EthosEnergy Group • Texas

Hybrid
USD 75,000 - 105,000
Referral bonus
Career development
Discount programs
Instrumentation, Controls & Electrical Technician
Instrumentation, Controls & Electrical Technician

EthosEnergy • Shepherd (TX)

On-site
USD 70,000 - 100,000
Comprehensive Medical, Dental, Vision,
401K Plan
Paid Parental Leave & Holidays
+2
Power Plant Maintenance Technician -Instrumentation, Controls and Electrical (IC&E)
Power Plant Maintenance Technician -Instrumentation, Controls and Electrical (IC&E)

Vistra Corp • Falls Township (PA)

On-site
USD 75,000 - 110,000
Production Technician I-IV
Production Technician I-IV

Oglethorpe Power Corporation • Rincon (GA)

On-site
USD 51,000 - 64,000
I & E Technician
I & E Technician

TXU Energy • United States

On-site
USD 65,000 - 100,000
Instrumentation, Controls & Electrical Technician
Instrumentation, Controls & Electrical Technician

Ethosenergy Power Solutions, LLC • Kentucky

On-site
USD 90,000 - 120,000
Employee Referral Bonus
Personal Development & Career Succ-
Perks & Discount programs
Instrumentation, Controls & Electrical Technician
Instrumentation, Controls & Electrical Technician

EthosEnergy Group • Texas

Hybrid
USD 75,000 - 105,000
Referral bonus
Career development
Discount programs