Plating - Weekend Shift - 90 Day Increase Eligible

TTM Technologies, Inc.

Denver (CO)

Vor Ort

USD 40.000 - 64.000

Vollzeit

14 Tage+

Erhalte eine Antwort von diesem Arbeitgeber

Dein Lebenslauf und dein Anschreiben, genau auf das zugeschnitten, was gesucht wird.

Schaffe es an den ATS-Filtern vorbei

Benefits dieser Stelle

Medical
Dental
Vision
401k
FSA/HSA
Paid time off

Zusammenfassung

TTM Technologies, Inc. in Denver seeks an Inner Layer Wet Process Operator to manage wet chemistry, resist development, and cupric etching on PCB panels. The role requires monitoring process parameters and maintaining solution levels across rinse sumps, while upholding safety and waste treatment standards.

You will follow MPP procedures, set conveyor speeds, test etch breaks, and help ensure high-quality panels through meticulous attention to detail and adherence to process controls.

Qualifikationen

  • Functional English skills (reading, writing, speaking)
  • Attention to detail
  • Adherence to all safety requirements of the position

Aufgaben

  • Check pH to ensure it remains within established limits.
  • Run break test to determine conveyor speed for developing.
  • Check developing solution for proper concentration as specified by MPP.
  • Monitor and maintain proper solution levels on rinse sumps.
  • Verify solution temperatures and etchant temperatures.
  • Inspect panels for defects and process first article panels.

Kenntnisse

Functional English
Attention to detail
Safety compliance

Jobbeschreibung

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer

About TTM

TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market.

Additional information can be found at www.ttm.com

The Inner Layer Wet Process Operator uses wet chemistry to etch circuit images and apply oxide to panels. Operators develop resist from layers, etch to remove copper that is not protected by resist, and strip off resist that was left from develop and etch cycles to expose circuit. Process panels through developer to remove excess resist on all unexposed areas of panel.

Principal Duties and Responsibilities:
  • Check ph to ensure it remains within established limits.
  • Run break test to determine conveyor speed for developing.
  • Check developing solution for proper concentration as specified by MPP.
  • The resist strip process is the removal of photo resist exposing the copper circuits.
  • Monitor and maintain proper solution levels on all rinse sumps.
  • Change solutions per tank maintenance.
  • Verify solution temperatures.
  • Ability to process first article panel.
  • Monitor to insure uniform and constant flow of work through appropriate resist stripper.
  • Follow all preventive maintenance schedules.
  • Follow all requirements for waste treatment.
  • Inspect panels for defects.
  • Cupric etching is a process whereby exposed copper is dissolved into a cupric based etchant.
  • Process panels per inner layer MPP:
  • Maintain automatic chemical feed and bleed systems.
  • Monitor and maintain proper solution levels on all rinse sumps.
  • Change solutions per tank maintenance or preventive maintenance.
  • Verify etchant temperatures.
  • Monitor etchant specific gravity.
  • Run spray nozzle test and etch break test daily.
  • Process first article panels.
  • Measure spacing and line width with microscope.
  • Set and monitor conveyor speed depending on copper thickness.
  • Monitor process to insure uniform and constant flow of work through etcher.
  • Follow all preventive maintenance schedules.
  • Follow all requirements for waste treatment.
  • Inspect panels for defects.
  • Perform other duties as assigned.
Job Knowledge, Skills and Abilities:
  • Functional English skills (reading, writing, speaking)
  • Attention to detail
  • Adherence to all safety requirements of the position
Training Requirements:
  • As required to run process according to Unicircuit Training guidelines
  • The employee is responsible to follow all RCRA standards as outlined by the certification that he or she has been trained to at all times. The health and safety regulations encompass the cleanliness of the area that he or she will be working as a result.
  • May handle hazardous waste as outlined in departmental work instructions. The following RCRA training is required on initial hire and on an annual basis thereafter
  • Introduction to RCRA, Properties of Facility Waste, Waste Minimization Accumulation, Container Management, and Emergency Response Plan.
Physical/Mental Demands:

Ability to lift 50 lbs. Ability to work with chemicals. Ability to work on feet for entire shift.

Compensation and Benefits:

TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered.

Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is:

$40,210 - $63,558

Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location.

Export Statement:

Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognitionofForeign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Hol dir deinen kostenlosen, vertraulichen Lebenslauf-Check.

oder ziehe deine Datei hierhin.

Similar jobs

Ähnliche Jobs, die dir auch gefallen könnten

Photo Operator - Dry Film Outer Layer - 2nd Shift - 90-Day Increase Eligible
Photo Operator - Dry Film Outer Layer - 2nd Shift - 90-Day Increase Eligible

TTM Technologies Inc. • Santa Ana (CA)

Vor Ort
USD 38.000 - 61.000
Health insurance
Dental and vision coverage
Paid holidays and PTO
+1
Plating - Weekend Shift - 90 Day Increase Eligible
Plating - Weekend Shift - 90 Day Increase Eligible

TTM Technologies Inc. • Denver (CO)

Vor Ort
USD 40.000 - 64.000
Medical
Dental
Vision
+9
Equipment Operator II
Equipment Operator II

TTM Technologies Inc. • City of Syracuse (NY)

Vor Ort
USD 38.000 - 60.000
Health benefits
401k
Flexible spending accounts
+2
Photo Operator - Dry Film Outer Layer - 2nd Shift - 90-Day Increase Eligible New
Photo Operator - Dry Film Outer Layer - 2nd Shift - 90-Day Increase Eligible New

NetVerks Inc. • USA

Vor Ort
USD 38.000 - 61.000
Health insurance
Paid holidays
Paid time off
Production-Plating Operators - Night Shift
Production-Plating Operators - Night Shift

TTM Technologies Inc. • Forest Grove (OR)

Vor Ort
USD 25.000 - 33.000
In Process Inspection - 2nd Shift
In Process Inspection - 2nd Shift

TTM Technologies, Inc. • Denver (CO)

Vor Ort
USD 48.000 - 75.000
Health and well-being benefit programs
Medical, dental, vision
401k
+5
Final Audit (Nights) New
Final Audit (Nights) New

NetVerks Inc. • USA

Vor Ort
USD 45.000 - 75.000
Plater Operator 3rd shift
Plater Operator 3rd shift

TTM Technologies, Inc. • San Jose (CA)

Vor Ort
USD 46.000 - 72.000
Health insurance
Dental insurance
Vision insurance
+2
B2 Wet Lab Technician - 3rd Shift - 90 Day Increase Eligible
B2 Wet Lab Technician - 3rd Shift - 90 Day Increase Eligible

TTM Technologies, Inc. • Stafford (CT)

Vor Ort
USD 50.000 - 65.000
Health insurance
Paid time off
401K plan
+1
Plating Operator - 1st Shift (90-day increase eligible)
Plating Operator - 1st Shift (90-day increase eligible)

TTM Technologies, Inc. • San Diego (CA)

Vor Ort
USD 40.000 - 64.000
Health insurance
401k
Paid vacation
+2