Pipe Fabricator Weekend and Day Shifts

Team Industries Inc; Port Arthur (TX); On-site; USD 70,000 - 82,000; Full time

Job summary

Team Industries Inc is seeking a Pipe Fabricator in Port Arthur, TX. The role focuses on tack-welding pipe components, aligning joints, and producing high-quality welds as part of a five-year apprenticeship program.

You will handle isometric drawings, verify material specs, and operate cranes as needed. The position requires GTAW on 2'' S-80 pipe, attention to detail, and strong safety discipline.

Qualifications

• Ability to weld 2'' extra strong carbon steel pipe in the 6G position,完成 within 3 hours or less.
• Tig welding with uphill passes.
• Ability to read and interpret safety rules, manuals and procedures; write reports; speak before groups.
• Ability to calculate proportions, percent, area, circumference and volume.
• Apply common-sense reasoning to detailed instructions in standardized situations.

Responsibilities

• Assemble pipe components by tacking in place prior to welding.
• Confirm squareness and fit of joints.
• Verify pipe joints are aligned and dimensioned per isometric drawings.
• Build pipe spool according to drawings (center-to-center or center-to-end).
• Verify material, type, grade against parts list.
• Retrieve materials and ensure correct parts match the bill of materials.
• Lift pipe with crane to fit-up bench.
• Weld joints and grind out temporary tacks.
• Position pieces for welding and purge pipe.
• Record heat numbers and identify welds at joints.
• Inspect welds and make corrections as needed.
• Maintain clean and safe work area; follow safety protocols.
• Reject unsafe work and escalate with supervisor.

Skills

Team player

Attention to detail

Communication skills

Reliability

Physical fitness

Welding experience

Read blueprints

Safety minded

Education

Five-year apprenticeship

Tools

Hand tools

Power tools

Crane operation

Construction calculator

Job description

This location is in Port Arthur, TX, relocation, or daily commute required.

Location: Port Arthur, TX

Shift: Weekend shift is 3-12 hour days, and 4 extra hours free. Day Shift is 4-10 hour days, Monday - Thursday

Payrate: $36.58 an hour (MUST PASS: 2' s/80 Tig all the way out in 6G)

Title: Pipe Fabricator

Department(s): Manufacturing

Reports to: Foreman

General Purpose of the Job:

Tack together fitting and pipe according to the isometric drawings and producing high-quality welds while gaining the knowledge and experience of a fabricator over the five-year apprenticeship.

Summary of Major Responsibilities/Duties:

• Assemble pipe components by tacking them in place prior to welding.
• Confirming squareness of all joints fit up.
• Confirming configuration of all joints fit up.
• Confirming pipe joints are aligned properly (taper bore if necessary).
• Confirming pipe spool is built according to the isometric drawings (center to center or center to end dimensions).
• Verify correct length, material, type, and grade of pipe and fittings prior to tacking.
• Retrieve material and make sure they correspond with parts list.
• Lifting pipe with crane to fit-up bench.
• This job involves a variety of other jobs such as welding, cutting, grinding, measurement, and layout.
• Weld joints.
• Grind out temporary tacks.
• Position pieces to be welded
• Purges pipe to be welded.
• Records filler rod heat numbers.
• Identifies his own welds by etching a weld number next to the joint.
• Inspects weld after and makes any corrections if needed.
• Keep work area clean and organized to prevent slips and trips.
• Conducts work safely and follows all safety procedures. Rejects work that is not safe and discusses the situation with supervisor.

Minimum Knowledge, Skills and Abilities Required:

• Ability to weld 2' extra strong carbon steel pipe, done in the six-G position (45° fixed jigs) in 3 hours or less.
• Tig out with all passes being up-hill progression.
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization.
• Ability to calculate figures and amounts such as proportions, percent, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry.
• Ability to apply common-sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

Other Requirements/ Key Competencies:

• Needs to be GTAW certified on 2' S-80 pipe in 6 G.
• Team player
• Attention to detail
• Good verbal and written communication skills
• Reliable
• Self-Motivated
• Mechanical ability and likes to work with their hands
• Good work ethics
• Pride in workmanship
• Be able to use construction calculator
• Willingness to learn
• Has to be a hard worker and physically fit as this can be a very physically demanding job.

Equipment Used:

• Hand tools (e.g., hammer, screwdriver)
• Power tools (e.g., saws, welder, drill, grinders)
• Vehicles (e.g., automobile, truck, tractor, lift)

Physical Demands, Working Conditions and Work Environment:

• Standing C
• Walking C
• Sitting R
• Lifting F
• Carrying F
• Pushing F
• Pulling F
• Climbing O
• Balancing O
• Stooping F
• Kneeling F
• Crouching O
• Crawling O
• Reaching C
• Handling C
• Little Physical Effort – 10lbs or less C
• Grasping C
• Light Work – up to 20lbs C
• Feeling O
• Medium Work – up to 50lbs F
• Talking C
• Heavy Work – up to 100lbs O
• Hearing C
• Very Heavy Work– above 100lbs R
• Repetitive Motions F
• Eye/Hand/Foot Coordination C
• Extreme Cold R
• Extreme Heat O
• Temperature Changes O
• Wet O
• Humid C
• Noise F
• Vibration F
• Hazards C
• Atmospheric Conditions C

WORK ENVIRONMENT

• ___C___Steel Toe Work Boots
• ___C___Hearing Protection
• ___C___Safety Eyeglasses
• ___R___Welding Coat
• ___R___Respirator
• ___C___Other PPE’s (explain) Gloves

All TEAM employees are required to follow all of TEAM’s safety policies and procedures for their safety and the safety of others.

Disclaimer:

The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed.