PCB Design Engineer, Power Stage Hardware

Fluidstack

Austin (TX)

On-site

USD 110,000 - 150,000

Full time

6 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Fluidstack is seeking a hands-on hardware engineer for the Product Engineering Team to design and validate gate-driver and power-stage boards for SiC/GaN converters at high voltage. You will layout, test, and iterate boards with a focus on reliability, dv/dt robustness, and manufacturability.

You will collaborate with technicians and a test engineer to bring prototypes to production, and you will hand off manufacturing-ready packages to contract manufacturers.

Qualifications

  • You've designed and brought up gate-driver and power-stage boards for SiC or GaN converters at hundreds of volts and above.
  • You've laid out boards that switch at high dv/dt without false triggering, and can show the loop inductance you designed for.
  • You've designed isolated power supplies or signal isolation for circuits floating at high voltage.
  • You've met creepage and clearance requirements on a high-voltage board and passed a hipot test with it.
  • You've taken a board from schematic to a contract manufacturer and fixed what failed at first article.

Responsibilities

  • Design the power stage and gate-driver boards for every SST cell: SiC half-bridge modules, isolated gate drivers, auxiliary power, and current and voltage sensing.
  • Lay out boards for fast-switching SiC with low-inductance commutation loops and creepage and clearance that hold at tens of kilovolts to ground.
  • Design isolated auxiliary power and signal links for boards that float at high voltage inside a series stack of cells.
  • Bring up boards on the bench with the technicians and test engineer, and close design spins from prototype cells to pilot units.
  • Hand off manufacturing-ready packages (fabrication and assembly data, test points, fixtures) to contract manufacturers.

Skills

Gate-driver boards design
Power electronics design
High-voltage board layout
dv/dt robustness
Low-inductance layout

Tools

Altium
Cadence

Job description

About Fluidstack

We exist to make humanity more free. For most of human history, you farmed or you starved. Technology gave people more time for the things they wanted to do, instead of things they had to do. Powerful AI will be the biggest lever for human choice we've ever built - but only if models are aligned with what humanity actually wants. There are groups building AI who don't share these goals. Whoever deploys frontier compute infrastructure fastest will decide whether AI expands human freedom or shrinks it.

We're singularly focused on delivering 10 to 100s of GWs of compute faster than anyone else, rethinking every layer of the stack. We acquire power, design and build data centers, and operate them - with teams spanning hardware and software. Speed and scale are our key differentiators. Come be a part of building civilization-scale infrastructure for AI.

We hire people who care deeply about this problem space. If that is you,

How We Operate
  • Be a barrel. Full autonomy. Own things end to end, take on scope without being asked, no permission required to operate outside your core role.

  • Insane urgency. We drive everything forward as fast as possible.

  • Reason from first principles. Challenge every assumption. Zero analogy thinking, no egos, the best idea wins.

  • Love of the game. The frontier of AI is the most interesting problem of our time. We put in long hours at high intensity to push the frontier forward.

  • Build something that actually matters. If you’re going to spend your time, spend it on something that matters to the world.

The Product Engineering Team

Product Engineering builds the power and cooling systems that let Fluidstack deliver gigawatt-scale AI data centers faster and denser than the grid-standard supply chain allows. The SST group is designing solid-state transformers as a core building block of that power architecture.

Examples of key problems the team is working on

  • Architect a medium-voltage solid-state transformer that can be manufactured, serviced, and scaled across gigawatt-scale campuses, not just demonstrated in a lab.
  • Define the interface between the SST and the MVDC distribution system, including protection, control boundaries, and fault behavior.
  • Build a semiconductor and magnetics supply strategy that survives a thin 10kV SiC market over a multi-year horizon.
  • Take converter hardware from topology selection through working prototypes on a schedule that data center construction actually depends on.
Role Scope
  • Design the power stage and gate-driver boards for every SST cell: SiC half-bridge modules, isolated gate drivers, auxiliary power, and current and voltage sensing.
  • Lay out boards for fast-switching SiC with low-inductance commutation loops and creepage and clearance that hold at tens of kilovolts to ground.
  • Design isolated auxiliary power and signal links for boards that float at high voltage inside a series stack of cells.
  • Bring up boards on the bench with the technicians and test engineer, and close design spins from prototype cells to pilot units.
  • Hand off manufacturing-ready packages (fabrication and assembly data, test points, fixtures) to contract manufacturers.
What We're Looking For

The below is a starting point. We always make space for exceptional people, so if you don't fit this role exactly, tell us where you would.

  • You've designed and brought up gate-driver and power-stage boards for SiC or GaN converters at hundreds of volts and above.
  • You've laid out boards that switch at high dv/dt without false triggering, and can show the loop inductance you designed for.
  • You've designed isolated power supplies or signal isolation for circuits floating at high voltage.
  • You've met creepage and clearance requirements on a high-voltage board and passed a hipot test with it.
  • You've taken a board from schematic to a contract manufacturer and fixed what failed at first article.
  • Bonus: PCB design tools (Altium, Cadence). Interconnect design certification (IPC CID, CID+). Power conversion board standards (IPC-2221, IPC-2152, IPC-9592). Sensing for power electronics (Rogowski coils, isolated amplifiers). Laminated busbar design.

We are committed to pay equity and transparency.

Fluidstack is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans’ status, or any other characteristic protected by law. Fluidstack will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law.

Applicant Privacy Notice
AI Screening Notice
Ashby Bias Audit

You will receive a confirmation email once your application has successfully been accepted. If there is an error with your submission and you did not receive a confirmation email, please email careers@fluidstack.io with your resume/CV, the role you've applied for, and the date you submitted your application-- someone from our recruiting team will be in touch.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

PCB Design Engineer, Power Stage Hardware
PCB Design Engineer, Power Stage Hardware

Fluidstack • New York (NY)

On-site
USD 120,000 - 190,000
Power Electronics Engineer
Power Electronics Engineer

Hardware FYI • Austin (TX)

On-site
USD 150,000 - 230,000
Power Electronics Engineer
Power Electronics Engineer

Fluidstack • Phoenix (AZ)

On-site
USD 110,000 - 170,000
Mechanical and Thermal Engineer, Power Electronics
Mechanical and Thermal Engineer, Power Electronics

Fluidstack • Austin (TX)

On-site
USD 120,000 - 180,000
PCB Design Engineer, Power Stage Hardware
PCB Design Engineer, Power Stage Hardware

Fluidstack • Seattle (WA)

On-site
USD 210,000 - 270,000
DC Power Systems and Protection Engineer
DC Power Systems and Protection Engineer

Fluidstack • Austin (TX)

On-site
USD 130,000 - 190,000
DC Power Systems and Protection Engineer
DC Power Systems and Protection Engineer

Fluidstack • New York (NY)

On-site
USD 120,000 - 210,000
Controls and Firmware Engineer, Power Electronics
Controls and Firmware Engineer, Power Electronics

Fluidstack • Phoenix (AZ)

On-site
USD 140,000 - 190,000
Test and Validation Engineer, High Voltage
Test and Validation Engineer, High Voltage

Fluidstack • Austin (TX)

On-site
USD 120,000 - 180,000
DC Power Systems and Protection Engineer
DC Power Systems and Protection Engineer

Fluidstack • San Francisco (CA)

On-site
USD 210,000 - 270,000