Painter Trainee - 2nd Shift

oshkoshcorporation

Dodge Center (MN)

On-site

USD 28,000 - 37,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

McNeilus Truck and Manufacturing Inc. in Dodge Center, MN seeks a Painter Trainee to apply paint and coatings using electrostatic/air assist guns on company products, including military spec paint.

You will prime, paint, and touch up vehicles, maintain safety and 6S standards, and participate in onboarding and annual hazardous waste training as required by EPA RCRA rules.

Qualifications

  • Eager to lean.

Responsibilities

  • Prime, paint, and touchup vehicles with power spray equipment and brushes.
  • Flush tanks, hoses, and guns prior to color changeovers.
  • Mix all types of paints for proper color, formula, conditions, viscosity, and consistency.
  • Perform titrations and mix or adjust chemicals as needed.
  • Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards.
  • Demonstrate best practices to follow all safe procedures in assembling and testing of all models/products in assigned job function.
  • Upkeep of work area and equipment which may include preventative maintenance tasks.
  • Inspect product before, during, after paint process to ensure specifications are being met.
  • Sand, wash, and condition parts as necessary.
  • Light bodywork may be required.
  • Inspection of completed parts for quality, validate components meet.
  • Participate in onboarding training and annual training related to being a hazardous waste handler as required by the EPA RCRA hazardous waste rules.

Education

High School Diploma or GED

Job description

About McNeilus, an Oshkosh Company

McNeilus Truck and Manufacturing Inc. is committed to serving everyday heroes and is an industry leading designer and manufacturer of refuse truck bodies. McNeilus produces a complete line of high-performance rear load, front load, and automated side load refuse bodies to augment any refuse collection fleet. Our team members are critical in our mission of supporting waste warriors and keeping communities safe and clean.

JOB SUMMARY:

The Painter Trainee is responsible for the application of paint and other coatings using electrostatic / air assist paint guns and other automotive type paint application devices on Company products including military spec paint.

Pay Range: $20 - $26.52

YOUR IMPACT:
  • These duties are not meant to be all-inclusive and other duties may be assigned.
  • Prime, paint, and touchup vehicles with power spray equipment and brushes.
  • Flush tanks, hoses, and guns prior to color changeovers.
  • Mix all types of paints for proper color, formula, conditions, viscosity, and consistency.
  • Perform titrations and mix or adjust chemicals as needed.
  • Maintain a safe and clean work environment in compliance with safety procedures, rules, and proper 6S standards.
  • Demonstrate best practices to follow all safe procedures in assembling and testing of all models/products in assigned job function.
  • Upkeep of work area and equipment which may include preventative maintenance tasks.
  • Inspect product before, during, after paint process to ensure specifications are being met.
  • Sand, wash, and condition parts as necessary.
  • Light bodywork may be required.
  • Inspection of completed parts for quality, validate components meet.
  • Participate in onboarding training and annual training related to being a hazardous waste handler as required by the EPA RCRA hazardous waste rules. This will include ability to understand what waste hazards are, storage time limits, satellite accumulation, marking, labeling, weekly inspections, aisle space, storage, manifest shipping, use and location of emergency equipment, response to spills and fires, evacuation routes, etc.
  • Disassemble, clean, repair, adjust and reassemble painting equipment, such as pumps, paint heaters, tanks, spray guns, etc. for proper operation (Repairs are only required in Dodge Center).
  • Apply decals, stencils, and rust-proofing as required (Dodge Center only).
MINIMUM QUALIFICATIONS:

Eager to lean.

STANDOUT QUALIFICATIONS:
  • High School Diploma or GED.
  • Previous experience in a manufacturing environment.
CORE COMPETENCIES:
  • Internal Contacts: Contact with peers and others involving explanation of information (these contacts may be within or outside department or division), and the gathering of factual information; may include the communication of sensitive or confidential information.
  • External Contacts: Limited external contact to: gather information, answer queries, or ask assistance.
  • Communication Skills: Read, write and comprehend simple instructions, short correspondence and memos. Read and interpret safety rules, operating/maintenance instructions and procedure manuals. Read, analyze and interpret business manuals, technical procedures and/or government regulations.
  • Decision-Making: Requires minimal decision-making responsibility.
  • Complexity, Judgment and Problem Solving: Work of a relatively routine nature. Requires the ability to understand the follow instructions.
WORKING CONDITIONS:

Physical Demands: Frequent: Standing, Walking/Running, Sitting, Reaching, Hearing, Talking, Visual, Typing; Occasional: Climbing, Driving, Bending/Kneeling, Hearing, Talking, Visual, Typing, Fine Dexterity, Manual Dexterity; Upper Extremity Repetitive Motion, Lifting/Carrying 25lbs., Pushing/Pulling 25llbs.

Non-Physical Demands: Occasional: Analysis/Reasoning, Communication/Interpretation, Math/Mental Computation, Reading, Sustained Mental Activity (i.e. auditing, problem solving, grant writing, composing reports), Writing.

Environmental Demands: Occasional: Work Alone, Frequent Task Changes, Tedious/Exacting Work, Dust, Temperature Extremes, Loud Noises.

Work Schedule: Routine shift hours. Infrequent overtime, weekend, or shift rotation.

Demands/Deadlines: Occasional stress due to deadlines or workload because of intermittent or cyclical work pressures, or occasional exposure to distressed individuals within the immediate work environment.

Oshkosh is committed to working with and offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability for any part of the recruitment process, please contact our talent acquisition team by email corporatetalentacquisition@oshkoshcorp.com .

Oshkosh Corporation is a merit-based Equal Opportunity Employer. Job opportunities are open for application to all qualified individuals and selection decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or other protected characteristic. To th

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Painter I - 1st Shift
Painter I - 1st Shift

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
USD 28,000 - 39,000
Painter Trainee - 2nd Shift
Painter Trainee - 2nd Shift

Oshkosh Corporation, Inc. • Dodge Center (MN)

On-site
USD 28,000 - 37,000
Industrial Painter - 2nd Shift
Industrial Painter - 2nd Shift

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
USD 28,000 - 39,000
Paid Time Off
Medical Insurance
Dental Insurance
+4
Painter I - 1st Shift
Painter I - 1st Shift

Oshkosh Corporation, Inc. • Dodge Center (MN)

On-site
USD 28,000 - 39,000
Industrial Painter - 1st Shift
Industrial Painter - 1st Shift

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
USD 42,000 - 59,000
Medical, Dental, Vision insurance
401K plan with company match
Tuition reimbursement
Industrial Paint Prepper - 2nd Shift
Industrial Paint Prepper - 2nd Shift

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
USD 25,000 - 34,000
Medical, Dental, Vision, 401K
Paid Time Off
Tuition reimbursement up to $10,000
+3
Industrial Painter - 2nd Shift
Industrial Painter - 2nd Shift

Oshkosh Corporation, Inc. • Dodge Center (MN)

On-site
USD 28,000 - 39,000
Medical, dental, vision insurance
401(k) plan with company match
Paid time off
+2
Industrial Painter - 1st Shift
Industrial Painter - 1st Shift

Oshkosh Corporation, Inc. • Dodge Center (MN)

On-site
USD 28,000 - 39,000
Medical, Dental, Vision insurance
401K with company match
Tuition reimbursement
+1
Painter ll
Painter ll

Oshkosh Corporation • Murfreesboro (TN)

On-site
USD 22,000 - 30,000
Paint Touch-Up Detailing - 1st & 2nd Shift ($26.33+)
Paint Touch-Up Detailing - 1st & 2nd Shift ($26.33+)

Pierce Manufacturing • Appleton (WI)

On-site
USD 34,000 - 39,000
Competitive pay
Merit increases
Comprehensive Benefit Package - Day 1
+3