Painter/Blaster

Cb&I Llc.; Louisiana (MO); On-site; USD 42,000 - 64,000; Full time

Job summary

CB&I is seeking a Painter/Blaster to prepare, coat, and finish tank walls, equipment, and structures. You will mix coatings, select appropriate primers, and perform sandblasting as needed to ensure long-lasting finishes.

The role requires adherence to safety rules, operation of spray guns and power tools, and the ability to work at heights with fall protection. This is an individual contributor position reporting to the Paint Supervisor.

Qualifications

• Experience painting and blasting tank walls, equipment and structures.
• Ability to select and mix coatings and primers for various surfaces.
• Familiarity with safety rules and confined-space procedures.

Responsibilities

• Cover surfaces to protect during painting.
• Mix coating additives to thin paint and promote drying.
• Fill cracks and joints with caulk or putty.
• Sandblast and remove rust and old paint as needed.
• Apply primers, sealers, and finishes to surfaces.
• Read work orders and follow instructions from supervisors.
• Move and set up scaffolding or ladders for elevated work.
• Maintain a clean and safe work area.

Skills

Adaptability

Communication skills

Safety awareness

Tools

Tape measure

Straight edge

Level

Chalk line

Industrial paint sprayers

Scaffolding

Ladders

Job description

Company Overview

CB&I delivers integrated storage and asset‑management solutions that help customers operate safely, reliably, and efficiently across the lifecycle of their facilities. Through our two global business units - Storage Solutions, the world leader in tanks, terminals, and storage systems, and Asset Solutions, a leading provider of operations, management, wells and decommissioning services - we combine technical excellence with execution capability to extend asset life, optimize performance, and maximize value.

Overview

The Painter/Blaster is responsible for Paint/Blasting tank walls, equipment, buildings, and other structural surfaces, using brushes, rollers, and spray guns. May remove old paint to prepare surface prior to painting. May mix colors or oils to obtain desired color or consistency. This position is an Individual Contributor role and directly reports to the Paint Supervisor.

Responsibilities

• Cover surfaces with drop cloths or masking tape and paper to protect surfaces during painting.
• Selects and mixes coating additives to thin or promote drying and adhesion.
• Fill cracks, holes, and joints with caulk, putty, plaster, or other fillers, using caulking guns or putty knives.
• Uses high air-pressure sandblasting equipment, chemical application, chipping hammer, power tools and other abrasives to remove rust, grease, dirt, concrete, and old paint prior to paint application.
• Apply primers or sealers to prepare surfaces, such as bare wood, metal, piping, fixtures, structures and equipment for finish coats.
• Selects paint according to company color scheme and specifications.
• Apply paint, stain, varnish, enamel, and other finishes to heavy equipment, buildings, bridges, and/or other structures, using brushes, spray guns, sandblasting equipment, or rollers. May use epoxy, latex or enamel coatings.
• Calculate amounts of required materials and estimate costs, based on surface measurements and/or work orders.
• Read work orders or receive instructions from supervisors or homeowners in order to determine work requirements.
• Disassemble paint and sandblasting equipment and cleans equipment, using solvent, wire brushes, and dry cloth.
• Erect scaffolding and swing gates, or set up ladders, to work above ground level.
• Remove fixtures such as pictures, doorknobs, lamps, and electric switch covers prior to painting.
• Wash and treat surfaces with oil, turpentine, mildew remover, or other preparations, and sand rough spots to ensure that finishes will adhere properly.
• Mix and match colors of paint, stain, or varnish with oil and thinning and drying additives in order to obtain desired colors and consistencies. Respiratory protection is common and required in many applications.
• Responsible for observing and complying with all safety and project rules.

Performs other duties as required.

Qualifications

• Painters must have the ability to use the following tools and equipment: Tape measure, straight edge, level, chalk line, material handling equipment, inspection equipment, hoists, hammers, pry bar, fit-up bar, wrenches, wire rope slings, shackles, hand wire brush, paint brush and rollers, sanding blocks, hand sanders. Power hand tools including grinders, drill mixers, industrial paint sprayers, industrial blast pots, wire brushes, saws and impact wrenches.
• Safety equipment: Hardhat, safety glasses with side shields, full body harness with double lanyard, earplugs, respiratory protection, gloves.
• Access elevated work platforms and scaffolds through use of ladders, stairways, or other designed access ways.
• Climb structures utilizing appropriate fall protection and available handholds and footholds.
• Understand verbal instructions and written posted notices.
• Capable of learning to read and understand basic drawings.
• Able to pass required safety exams.
• Practice good housekeeping to maintain a clean, orderly and safe work area.
• Comply with all written and verbally communicated safety rules and procedures
• Work in confined spaces where respirators and fresh air equipment are utilized.
• Outdoor exposure to weather elements (heat, cold, sun, snow, wind, rain etc.)
• Work effectively at heights without disorientation on construction scaffolds and ladders which may be heights over 100ft while utilizing fall protection

Work in confined spaces

Skills and Behaviors

• Adaptability and Agility to learn and contribute in varying and complex environments
• Advanced Self-Awareness and Interpersonal skills
• Communication Skills: Ability to effectively verbally communicate directions from craft supervisors and respond to questions from managers and fellow workers.

Mathematical skills: Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations.

Physical Requirements

NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%)

• Standing: C
• Walking: O
• Sitting: O
• Pushing: F
• Pulling: F
• Climbing: F
• Balancing: F
• Bending: F
• Stooping: F
• Kneeling: F
• Crouching: O
• Crawling: O
• Reaching: C
• Handling: F
• Fingering: O
• Feeling: C
• Vision: C
• Hearing: C
• Lifting (lbs.): 0-10lbs: F
• Carrying (lbs.): 0-10lbs: F
• Lifting (lbs.): 10-20lbs: F
• Carrying (lbs.): 10-20lbs: F
• Lifting (lbs.): 25-50lbs: O
• Carrying (lbs.): 25-50lbs: O
• Lifting (lbs.): 50-100lbs: NP
• Carrying (lbs.): 50-100lbs: NP
• Lifting (lbs.): 100lbs+: NP
• Carrying (lbs.): 100lbs+: NP