Paint Line Worker - 1st Shift

R.H. Sheppard Co. Inc.

Hanover (York County)

Presencial

USD 36.000 - 48.000

Tempo integral

Há 10 dias

Uma candidatura completa em um minuto

Currículo e carta de apresentação personalizados, prontos para serem enviados.

Passe pelos filtros ATS

Resumo da vaga

R.H. Sheppard Co. Inc. in United States is seeking a Paint Line Worker to prepare gears and other parts for shipment. The role requires working under moderate supervision in a fast-paced environment, with hands-on tasks across the paint line.

Responsibilities include installing covers, loading/unloading, masking, prepping, and ensuring proper barcode scanning and tagging. The position emphasizes attention to detail, safety, and consistent quality in a factory setting.

Qualificações

  • High School Diploma or GED required.
  • Experience in manufacturing environment preferred.
  • Lean manufacturing knowledge and continuous improvement mindset is a plus.

Responsabilidades

  • Cover/cover installer: install seals and prepare gears for painting.
  • Loader/unloader: move gears/arms to paint line, scan barcodes, and label for prep.
  • Masker/painter: mask areas not to be painted and apply dirt shields.
  • Unmasker: remove masking after coating and maintain paint room cleanliness.
  • Prepper: prep gear per AS400 instructions and apply required components.
  • Skidder: manage barcodes, packaging materials, and skids for shipment.
  • Pre-Torque: verify timing and torque, assist with unloading painted arms.
  • Pitman Arm Installer: install arms, record torque data, read depth gauge.
  • Carpenter: prepare skis and repair skids for shipment.
  • Other duties as assigned.

Conhecimentos

Problem solving
Prioritization
Lean manufacturing
Overtime readiness

Formação

High School Diploma or GED

Ferramentas

MS Office

Descrição da vaga

Description

The primary responsibility of the Paint Line Worker position is to prepare gears and other parts for shipment. The individual must be able to work under moderate supervision in a fast- paced environment.

  • Cover/Cover Installer: Install “cover/cover” seals in all steering gears by applying grease under seals when required and hangs arms to be painted.
  • Loader/Unloader: Pull gears/arms from a skid and hang them on the paint line, scan bar code into AS400 computer system, place bar code ticket on ticket holder, cover output shaft with plastic tube, and place magnet on dirt shield area. To unload, remove painted gear/arm from paint line hooks, place correct bara code label on each gear and place on conveyer belt to go to the “prepper.” Must be able to multi-task efficiently. Note: Visually look at each arm to make sure that there is no paint in splines or ball holes
  • Masker/Painter: Cover all areas on gears/arms with various magnets and shields that are not to be painted. Apply dirt shields to all steering gears as required. Maintain all daily and monthly checklists for the paint booth area.
  • Unmasker: Remove all masking from gears/arms after powder coating has been applied without disturbing the thin layer of powder. Maintain all daily and monthly checklists for paint booth area. Vacuum and mop floor in paint room daily.
  • Prepper: Scan bar code of first gear in a group that is different from the last group. The AS400 computer system will specify exactly how to prep the specified model. Place grease, boots, shields, nets, retainers, etc as specified on each gear. Incumbent will install pitman arms on steering gears as needed.
  • Skidder: Scan each bar code into AS400 computer system before placing onto the correct skid. Must pre-load conveyor with correct packaging materials for different customers. Follow skidding instructions in the Carpenter’s manual, place gears on skids in the correct formation, print out ticket, strap and shuttle them to the end of the conveyer for inspection; must individually box gears daily.
  • Pre-Torque: Verify Pitman arm timing is correct, installs retainer, pre-torques retainers before final torque; makes retainer as needed. Responsible for helping unload painted pitman arms from conveyor and putting them in correct storage bins.
  • Pitman Arm Installer: Install Pitman Arms on gears as needed, contact inspection for first piece inspection of mounted arms. Scan bar codes into AS400 computer system and enter torque data for each arm installed. Must read depth gauge. Must read depth gauge indicator when required and calibrate torque tool daily.
  • Carpenter: Construct skis as needed to use in the shipment of steering gears to the customer. Rework purchased skids and constructs specialty skids for shipment of machine parts and specialty items
  • Other duties as assigned.
Description

The primary responsibility of the Paint Line Worker position is to prepare gears and other parts for shipment. The individual must be able to work under moderate supervision in a fast- paced environment.

Essential Duties
  • Cover/Cover Installer: Install “cover/cover” seals in all steering gears by applying grease under seals when required and hangs arms to be painted.
  • Loader/Unloader: Pull gears/arms from a skid and hang them on the paint line, scan bar code into AS400 computer system, place bar code ticket on ticket holder, cover output shaft with plastic tube, and place magnet on dirt shield area. To unload, remove painted gear/arm from paint line hooks, place correct bara code label on each gear and place on conveyer belt to go to the “prepper.” Must be able to multi-task efficiently. Note: Visually look at each arm to make sure that there is no paint in splines or ball holes
  • Masker/Painter: Cover all areas on gears/arms with various magnets and shields that are not to be painted. Apply dirt shields to all steering gears as required. Maintain all daily and monthly checklists for the paint booth area.
  • Unmasker: Remove all masking from gears/arms after powder coating has been applied without disturbing the thin layer of powder. Maintain all daily and monthly checklists for paint booth area. Vacuum and mop floor in paint room daily.
  • Prepper: Scan bar code of first gear in a group that is different from the last group. The AS400 computer system will specify exactly how to prep the specified model. Place grease, boots, shields, nets, retainers, etc as specified on each gear. Incumbent will install pitman arms on steering gears as needed.
  • Skidder: Scan each bar code into AS400 computer system before placing onto the correct skid. Must pre-load conveyor with correct packaging materials for different customers. Follow skidding instructions in the Carpenter’s manual, place gears on skids in the correct formation, print out ticket, strap and shuttle them to the end of the conveyer for inspection; must individually box gears daily.
  • Pre-Torque: Verify Pitman arm timing is correct, installs retainer, pre-torques retainers before final torque; makes retainer as needed. Responsible for helping unload painted pitman arms from conveyor and putting them in correct storage bins.
  • Pitman Arm Installer: Install Pitman Arms on gears as needed, contact inspection for first piece inspection of mounted arms. Scan bar codes into AS400 computer system and enter torque data for each arm installed. Must read depth gauge. Must read depth gauge indicator when required and calibrate torque tool daily.
  • Carpenter: Construct skis as needed to use in the shipment of steering gears to the customer. Rework purchased skids and constructs specialty skids for shipment of machine parts and specialty items
  • Other duties as assigned.
Core Competencies
  • Action oriented: Demonstrates ability to take action and lead by example. Enthusiastically demonstrates sense of urgency.
  • Self-Motivated: Demonstrates ability to take initiative and drive to achieve results.
  • Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
  • Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication.
  • Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
  • Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments.
Working Environmental Conditions
  • May be exposed to moderate heat, light dust, fumes, extreme temperatures, noise and hazards such as electrical shock or gases. Some outside assignments could involve exposure to adverse weather conditions. Adequate hearing protection is required for 85 decibels and above.
Supervisory Responsibility
  • This position has no supervisory responsibilities.
Schedule
  • 8-hour Day Shift Monday through Friday

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

Requirements
QUALIFICATIONS:
  • High School Diploma or GED
  • Basic MS Office skills (Word, Excel, Outlook, PowerPoint, Teams)
  • One year of experience in a manufacturing environment
  • Experience in shipping/receiving in a production/manufacturing environment
  • Completion of forklift certification
  • Problem solving skills
  • Ability to prioritize and work well under pressure
  • Working knowledge of Lean Manufacturing techniques with emphasis on Standardized Work, Continuous Improvement, 5S, and JIT principles
  • Ability to work overtime as needed both daily and weekends
Obtenha sua revisão de currículo grátis e confidencial.

ou arraste e solte seu arquivo aqui.

Similar jobs

Vagas similares que valem a pena comparar

Paint Line Worker - 1st Shift
Paint Line Worker - 1st Shift

RH Sheppard • Hanover

Presencial
USD 21.000 - 30.000
Paint Line Worker - 1st Shift
Paint Line Worker - 1st Shift

R. H. Sheppard Co. • Hanover

Presencial
USD 22.000 - 30.000
General Assembler - 3rd Shift
General Assembler - 3rd Shift

RH Sheppard • Hanover

Presencial
USD 42.000 - 54.000
5 Years Direct Hire Team Member
5 Years Direct Hire Team Member

Toyoda Gosei Americas • Perryville (MO)

Presencial
USD 32.000 - 40.000
Quality Control Technician - 2nd Shift
Quality Control Technician - 2nd Shift

R.H. Sheppard Co. Inc. • Hanover

Presencial
USD 25.000 - 39.000
2 Years Direct Hire Team Member
2 Years Direct Hire Team Member

Toyoda Gosei Americas • Hopkinsville (KY)

Presencial
USD 30.000 - 40.000
Health insurance
Paid time off
Retirement plan
Paint Line Helper - West Bend
Paint Line Helper - West Bend

Metalcraft of Mayville, Inc. • West Bend (WI)

Presencial
USD 32.000 - 48.000
1st Shift - Paint - General Labor
1st Shift - Paint - General Labor

Speedrack • Michigan

Híbrido
USD 28.000 - 40.000
Molding Operations - Production Associate 1st Shift
Molding Operations - Production Associate 1st Shift

Grote Industries • Madison (IN)

Presencial
USD 36.000 - 48.000
Production Manager
Production Manager

LM Manufacturing • Detroit (MI)

Presencial
USD 85.000 - 110.000