P&C Electrician C - P&C Electrician A

AEP; Texarkana (TX); Sur place; USD 52 000 - 85 000; Plein temps

Résumé du poste

AEP is seeking a P&C Electrician C to P&C Electrician A for the Texarkana Area. Residency within 30 miles of Texarkana Service Center is required. You will assist in testing, calibration, installation, and maintenance of protective and control devices and related equipment.

This role emphasizes safety, adherence to NERC standards, and ability to work under supervision while developing technical skills and records. Strong problem solving and teamwork are valued.

Qualifications

• Associate degree in electrical/electronic technology.
• No prior work experience required.
• Must possess and maintain a valid state driver’s license.
• Must successfully complete Physical Abilities Test (PAT).

Responsabilités

• Assist in acceptance and installation tests on protection, control, and measurement devices.
• Test protection & control devices periodically as required.
• Calibrate protection & control devices on a pre-established schedule.
• Assist with diagnosis of trouble, mis-operation, or damage and corrective actions.
• Operate test equipment to test, calibrate, and retrieve data from devices.
• Assist in installation, maintenance, and operation of SCADA and communications equipment.
• Maintain accurate records, reports and drawings.

Connaissances

Technical knowledge

Test equipment operation

Clear communication

Formation

Associate degree in Electrical/Electronic Tech

Description du poste

P&C Electrician C - P&C Electrician A### P&C Electrician C - P&C Electrician AApply: Texarkana, TX: Full time: Posted Today: End Date: November 16, 2026 (9 days left to apply): R19846**Job Posting End Date**11-16-2026Please note the job posting will close on the day before the posting end date**Job Summary**Perform work associated with the installation, operation, testing and maintenance of all protection and control devices and related equipment under direct, immediate or general supervision. Such devices and equipment includes but is not limited to digital relays, electromechanical relays, intelligent electronic devices, Station Disturbance Recorders (SDR), digital fault recorders (DFR), oscillographs and event recorders, RTU's and station SCADA systems, statistical load metering, telemetering and transducers. Additionally, install, maintain and operate all power line carriers (PLC), tone, pilot wire, fiber and associated P&C communications equipment. Respond to emergency call-outs and coordinate prompt restoration of service to customers as required. This list is not intended to limit assignment of work or the degree of supervision under all operating conditions. Employee may perform miscellaneous, related, and incidental work in addition to that specifically outlined below.The following reference is provided as a guideline for persons responsible for directing the duties and responsibilities of assigned personnel, to assist in the safety and development of employees, and is not intended to limit assignment of work or the degree of supervision under all operating conditions:DIRECT SUPERVISION - When a qualified person is working with/hands-on with the person performing the designated task.IMMEDIATE SUPERVISION - When a qualified person is near the structure/equipment and is in constant visual and/or verbal contact to the person performing the designated task.GENERAL SUPERVISION - An employee of equal or higher classification, knowledgeable of the task at hand and not necessarily at the job site.QUALIFIED PERSON ' P&C Electrician or Supervisor who is knowledgeable of the task or work to be performed, and is capable of performing the appropriate emergency rescue.**Job Description**AEP is seeking a P&C Electrician C to P&C Electrician A for the Texarkana Area. *Residency Requirements: Successful Candidate must live within a 30 mile radius of the Texarkana Service Center* **What You'll Do** * Assist in the performance of acceptance and installation tests on protection, control, and measurement devices and associated equipment in stations.* Test protection &control devices and equipment periodically and as required.* Calibrate protection & control devices and equipment on a pre-established schedule and as required.* Assist with diagnosis of trouble, mis-operation, or damage of equipment and assist with corrective action to affect repair and prevent recurrence.* Operate a computer device to test, calibrate, and retrieve data from protection & control and devices.* Assist in the installation, maintenance, and operation of all power line carriers, station SCADA, and associated communications equipment or cables as assigned.* Perform switching under direct supervision of qualified personnel following direction of the proper operating authority.* Assist in the installation, maintenance, and operation of any new and added equipment or systems as assigned.* Maintain test equipment and automotive equipment in good working order so that work can be performed safely and efficiently anywhere throughout the System.* Prepare and maintain accurate records, reports and drawings as required.* Assist employees of equal or higher classification.* Perform all duties in accordance with the Company's safety rules and operating regulations, NERC and environmental compliance, and practices.* Perform similar or less skilled work as assigned. Note: This position is posted at multiple grade levels and offers a range of opportunities for advancement. The minimum qualifications outlined below apply to the P&C Electrician C level, with increased educational, skill or experience requirements for higher level P&C Electricians. **What We're Looking For:** **Education:** Associate’s degree in electrical engineering technology, electronic technology, or related technology field. **Experience:** No previous work experience required. Must have the ability and desire to acquire the necessary knowledge and skills to perform the duties and/or responsibilities of the key job (P & C Electrician A) in this family and be qualified through demonstration, examination and/or performance appraisal as determined by the Company. Considerable travel and overtime may be required to complete work assignments. Must successfully complete Physical Abilities Test (PAT). **License/Certification:** Must possess and maintain a valid state driver’s license and must meet all vehicle operation requirements as designated by federal and/or state law. **Other :** * Minimum Requirement**s**:Amount of weight lifted from floor/ground to waist level: 60 pounds.Amount of weight to be carried for 20 feet: 50 pounds.* Amount of weight lifted to chest level: 30 pounds.Amount of weight lifted to eye level: 30 pounds.* Distance to walk accumulated over the course of an 8 hour shift: 1 mile.* Distance in feet to climb and work on a ladder/structure: 20 feet and higher.* Distance in feet to ascend to and work in a bucket/lift: 100 feet and higher (tested at 60 feet).* Ability to discriminate between colors: Yes (tested). **Competencies*** Technical Proficiency**:** Possesses technical knowledge acquired from an Associate Degree in Electrical/Electronic Engineering Technology.Gains knowledge of standards, codes, and regulations relevant to area of assignment.Gains knowledge with pertinent equipment, material, systems, and business processes. Assists employees in handling defined portions of routine problems when beneficial to AEP. Possesses basic computer literacy, knowledge, and skills.* Leadership and Guidance: Performs work activities as assigned and coached by higher level employees. Demonstrates ability to work with others in supplying information and seeking assistance as necessary.* Planning and Organization Ability: Plans work in accordance with AEP standard planning practices. Prioritizes routine work to meet the demands of the company. · Maintains accurate records.* Problem-Solving and Initiative**:** Applies technical knowledge and experience in resolving problems encountered in assigned work. Uses initiative in looking for opportunities to improve the process and increase job knowledge/technical skills. Seeks out, compiles, analyzes, and interprets information necessary to perform work activities and solve problems.* Communications and Interpersonal Skills**:** Communicates effectively, both orally and in writing with internal and external customers. Assists in the preparation of technical reports and papers. Demonstrates the ability to be a team player. Relates to people in an open, friendly, and sincere manner.* Decision Making and Business Awareness Characteristics: Developsdecision-making skills based on sound judgment and job knowledge. Develops an understanding of the roles and responsibilities of the local organizational unit. **What You'll Get** In addition to a competitive compensation, AEP offers a unique comprehensive benefits package that aims to support and enhance the overall well-being of our employees. Where Putting the Customer First Powers Everything We Do At AEP, we’re more than just an energy company — we’re a team of dedicated professionals committed to delivering safe, reliable, and innovative energy solutions. Guided by our mission to put the customer first, we strive to exceed expectations by listening, responding, and continuously improving the way we serve our communities. If you're passionate about making a meaningful impact and being part of a forward-thinking organization, this is the company for you!**Compensation Data****Compensation Grade:**U073-R29**Compensation Range:**$37.50 - $62.38The Physical Demand Level for this job is: H – Heavy Work: Exerting 50 to 100 pounds of force occasionally, and/or 25 to 50 pounds of force frequently, and/or greater than negligible up to 10-20 pounds of force constantly to move objects. Physical demand requirements are in excess of those for Medium Work.