Optical Components Engineer

LYTE

Sunnyvale (CA)

On-site

USD 150,000 - 230,000

Full time

1 hour ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Competitive salary and equity
Medical, dental, and vision coverage
Flexible vacation and time-off policy
Cutting-edge technologies and cross‑功能
Collaborative, fast-paced environment

Job summary

Lyte, based in Sunnyvale, California, is scaling 4D FMCW lidar into volume production. This role owns precision optical components—lenses, prisms, windows, waveplates, and coatings—from specification through vendor qualification to steady supply.

You will drive specs, manage vendors, and ensure system-level performance through rigorous tolerance and reliability analyses. You will build optical models in Zemax OpticStudio or Code V, correlate component and system performance, and lead testing and

Qualifications

  • MS, or Ph.D. in Optical Engineering, Photonics, Physics, or related field, or equivalent practical experience.
  • 5+ years in optical component engineering, supplier engineering, or optical design for production with precision optics.
  • Proven track record managing optical vendors from RFQ through qualification and volume delivery.
  • Deep knowledge of optical specifications, coatings, materials, and tolerance capability of processing.
  • Hands-on optical simulation in Zemax OpticStudio or Code V with tolerancing and Monte Carlo.
  • Experience planning reliability qualification for optical components and testing.

Responsibilities

  • Own optical component supply base: qualify and manage lenses, prisms, windows, waveplates, and coatings with vendors.
  • Converge component specs to system performance, align with design, mechanical, and vendor manufacturability.
  • Correlate component specs to system lidar performance and conduct tolerance analyses.
  • Drive vendor delivery: manage build plans, WIP, yield, and risk mitigation across multiple stages.
  • Define vendor testing plans and ensure Cp/Cpk-capable data with shipments.
  • Test in-house: interferometry, MTF, spectral transmittance/reflectance, polarization, metrology.
  • Lead reliability qualification including environmental and lifetime tests.
  • Build optical simulation capability and model component behavior for root-cause analysis.
  • Lead failure analyses and corrective actions with vendors; manage MRB decisions.
  • Own documentation: drawings, specs, test methods, and ECO/PCN control.
  • Collaborate across optical design, systems, mechanical, NPI, quality, and procurement; travel to Asia as needed.

Skills

Optical design
Vendor management
Tolerance analysis
Optical metrology
Python/MATLAB
FMCW lidar knowledge

Education

MS/PhD in Optical Engineering

Tools

Zemax OpticStudio
Code V

Job description

  • Lyte is scaling 4D FMCW lidar into volume production. This role owns the precision optical components that go into our sensors - lenses, prisms, and other optic elements - from first specification through vendor qualification to steady, on-time volume supply. You will be the single technical owner for each component and its vendors. You will drive component specifications to convergence across optical design, systems, mechanical, and the vendor; tie every component tolerance back to system-level lidar performance; hold vendors accountable for delivery; define how parts are tested both at the vendor and in house; and own component reliability through qualification and ongoing monitoring. Underpinning all of it is optical simulation: you will build the modeling capability that predicts how component variation shows up at the system level, and use it to set specs that are both sufficient and manufacturable.
What you'll do
  • Own the optical component supply base - Identify, assess, qualify, and manage vendors for lenses, prisms, windows, waveplates, and coatings. Run technical reviews and capability assessments, and lead second-source qualification in partnership with procurement and quality.
  • Drive component spec convergence - Take each component from first draft to signed-off drawing — surface form and irregularity, transmitted wavefront error, centration and wedge, dimensional and angular tolerances, coating reflectance and transmittance, laser damage threshold, scratch-dig, and environmental requirements. Align optical design, mechanical, systems, and vendor manufacturability, close open items, and freeze specs on schedule.
  • Correlate component specs to system specs - Build and maintain the flow-down from system-level 4D FMCW lidar performance - range accuracy and precision, SNR, signal intensity, and point-cloud quality — to component tolerances. Use sensitivity and tolerance analysis to show which parameters truly matter and where margin can be released to improve cost and yield.
  • Drive vendor delivery - Own component build plans and delivery commitments across prototype, EVT/DVT/PVT, and volume ramp. Track WIP, yield, and capacity at each vendor, flag risks early, and drive recovery plans with procurement and NPI program management.
  • Test at the vendor - Define vendor outgoing inspection and test plans — measurement methods, sampling, and data reporting formats. Audit vendor metrology and ensure vendor data is Cp/Cpk-capable and delivered with every shipment.
  • Test in house - Define incoming inspection and engineering characterization at Lyte — interferometry, MTF, spectral transmittance and reflectance, polarization, and dimensional metrology. Partner with test engineering on IQC stations, maintain golden samples, and prove vendor-to-Lyte measurement correlation.
  • Own component reliability - Define and own reliability qualification for every optical component — environmental and lifetime test plans covering thermal cycling and shock, damp heat and humidity, vibration and mechanical shock, coating adhesion and durability, laser damage, and UV and solar exposure, aligned to automotive and lidar product requirements. Execute tests at supplier sites, in Lyte's internal labs, or at external test labs as best fits each test, and own the results end to end: pass/fail disposition, failure analysis, corrective action with vendors, and ongoing reliability monitoring through production.
  • Build optical simulation capability - Model components and sub-assemblies in Zemax OpticStudio or Code V - tolerancing, Monte Carlo, polarization, and stray light and ghost analysis. Compare measured against simulated performance to root-cause shortfalls, and build reusable models and methods the wider team can rely on.
  • Lead failure analysis on component non-conformances, drive corrective action with vendors , and support MRB and deviation decisions with data.
  • Own component documentation — drawings, specifications, test methods, the approved vendor list, and change control (ECO/PCN).
  • Collaborate across optical design, systems, mechanical, NPI, quality, and procurement, and travel to vendor sites in Asia to support qualification, issue resolution, and ramp.
Required Qualifications
  • M.S., or Ph.D. in Optical Engineering, Photonics, Physics, or a related field — or equivalent practical experience.
  • 5+ years in optical component engineering, supplier engineering, or optical design for production, working with precision optics such as lenses, prisms, windows, waveplates, or coated optics (e.g., in lidar, camera, AR/VR, telecom, or semiconductor optics).
  • Proven track record managing optical vendors from RFQ through qualification and volume delivery, including driving schedule recovery when delivery slips.
  • Deep working knowledge of optical component specifications and fabrication - drawings, surface form, wavefront, centration, wedge, scratch-dig, thin-film coatings, and optical glass and crystal materials — and of the tolerance capability of grinding, polishing, molding, and coating processes.
  • Hands-on optical simulation in Zemax OpticStudio or Code V, including tolerancing, sensitivity, and Monte Carlo analysis, and the ability to turn results into clear component specifications.
  • Hands-on optical metrology — Fizeau interferometers, MTF benches, spectrophotometers, autocollimators, and profilometers — including gauge R&R and cross-site measurement correlation.
  • Experience planning and running reliability qualification for optical components — environmental stress and lifetime testing, coating, and analysis of post-test optical and cosmetic degradation.
  • Data analysis skills (Python, MATLAB, or JMP) to work with vendor and in-house test data at volume.
  • Willingness and ability to travel between the US and vendor sites in Taiwan and across Asia (up to ~25%).
Preferred Qualifications
  • Experience with lidar, FMCW, or coherent detection systems, and with near-infrared optics.
  • Polarization optics — waveplates, polarizing beam splitters, and prism assemblies — and optical bonding processes.
  • Stray light analysis with FRED, LightTools, or ASAP.
  • Supplier quality practices; automotive supply chain experience a strong plus.
  • Automotive reliability standards, reliability statistics (Weibull, acceleration models), and managing external test labs.
  • Track record of second-sourcing and cost reduction through spec optimization.
  • Prior working relationships with optics vendors in Asia.
Benefits
  • Competitive salary and equity
  • Comprehensive medical, dental, and vision coverage
  • Flexible vacation and time-off policy
  • Collaborative, fast-paced, and inclusive work environment
  • Opportunity to work oncutting-edgetechnologies with a highly cross-functional team
About Lyte

Lyte buildsperceptionsystems for Physical AIoperatingin complex environments. The company combines custom silicon, integrated sensors, and software into a unified platform for robotics, mobility, and next-generation automation. Lyte is headquartered in Sunnyvale, California, with a global presence. For more information, visit www.lyte.ai

The pay range for this role is:

150,000 - 230,000 USD per year (Bay Area, CA)

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Optical Components Engineer
Optical Components Engineer

Lyte AI Inc. • Sunnyvale (CA)

On-site
USD 150,000 - 230,000
Equity
Medical coverage
Flexible vacation
+2
Senior Optical Engineer
Senior Optical Engineer

lyte • Sunnyvale (CA)

On-site
USD 150,000 - 260,000
Competitive salary
Equity
Medical coverage
+2
Senior Optical Test Development Engineer
Senior Optical Test Development Engineer

Lyte AI Inc. • Sunnyvale (CA)

On-site
USD 150,000 - 260,000
Salary and equity
Medical, dental, and vision coverage
Flexible vacation
+1
Senior Photonics Engineer
Senior Photonics Engineer

Lyte AI Inc. • Sunnyvale (CA)

On-site
USD 210,000 - 280,000
Competitive salary and equity
Medical, dental, vision coverage
Flexible vacation policy
+3
Optical System Integration Engineer
Optical System Integration Engineer

Lyte AI Inc. • Sunnyvale (CA)

On-site
USD 110,000 - 170,000
Competitive salary and equity
Medical, dental, and vision coverage
Flexible vacation and time-off
Systems Engineer - Module Integration
Systems Engineer - Module Integration

Lyte AI Inc. • Sunnyvale (CA)

On-site
USD 150,000 - 260,000
Competitive salary and equity
Comprehensive medical, dental, and vis
Flexible vacation
+2
Test Systems Design Engineer – Optical Subsystem IQC/OQC & Automation
Test Systems Design Engineer – Optical Subsystem IQC/OQC & Automation

Lyte • Sunnyvale (CA)

On-site
USD 150,000 - 260,000
Equity
Medical, dental, and vision
401(k)
+3
Senior Optical Test Development Engineer (Lidar Manufacturing)
Senior Optical Test Development Engineer (Lidar Manufacturing)

Lyte AI • Sunnyvale (CA)

On-site
USD 120,000 - 180,000
Salary and equity (offer stage)
Comprehensive medical, dental, vision
401(k) retirement plan
+3
Senior Mechanical Design Engineer
Senior Mechanical Design Engineer

Lyte AI Inc. • Sunnyvale (CA)

On-site
USD 150,000 - 260,000
Competitive salary and equity
Medical, dental and vision coverage
Flexible vacation and time-off policy
+3
Senior Mechanical Design Engineer
Senior Mechanical Design Engineer

LYTE • Sunnyvale (CA)

On-site
USD 150,000 - 260,000
Competitive compensation
Medical coverage
Flexible time off
+2