Operator - Non-Certified (2nd Shift)

GKN Aerospace company

Newington (CT)

On-site

USD 51,000 - 64,000

Full time

9 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

GKN Aerospace in Newington, CT is seeking an experienced Machinist to operate horizontal and vertical CNC machines, following fixtures and process sheets to meet tolerances. You will run a mix of parts, inspect against operation sheets, and adjust programs as needed.

The role requires a High School Diploma or GED and at least 2 years of machining experience, plus the ability to troubleshoot, read measuring devices, and multitask in a fast-paced manufacturing environment.

Qualifications

  • High School Diploma or GED equivalent.
  • 2+ years of machining experience in a manufacturing environment.
  • Basic troubleshooting skills; such as identifying tooling issues.
  • Familiarity with the use of measuring devices.
  • Able to multitask.
  • Must be US Person (Citizen or Green Card Holder) or have the ability to obtain the necessary Government licensing to work with controlled technology and products.

Responsibilities

  • Operate cells of machines independently or with others to meet tact time.
  • Batch and serialize parts.
  • Document work as needed.
  • Set and monitor cutters and ensure correct limits from tool sheets.
  • Follow work instructions and SOPs.
  • Maintain a clean work area.
  • Inspect parts with micrometers and indicators per operation sheets.
  • Monitor and adjust coolant levels and refractor coolant as needed.
  • Remove metal chips and manage chips containers.
  • Verify tool offsets and adjust as required for quality parts.
  • Complete preventive maintenance on cell equipment.
  • Machining all assigned parts and run a majority of product mix.
  • Load and unload parts for machines.
  • Support safe environment and continuous improvement ideas.
  • Perform other duties as assigned.

Skills

Machining experience
Blueprint reading
Troubleshooting
Measuring devices
Multitasking
US government licensing

Education

High School Diploma or GED

Tools

Zimmermann Control
Siemens Control

Job description

Fantastic challenges. Amazing opportunities.

GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we’re inspired by the opportunities to innovate and break boundaries. We’re proud to play a part in protecting the world’s democracies. And we’re committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 32 manufacturing sites in 12 countries we serve over 90% of the world’s aircraft and engine manufacturers and achieved sales of £3.6bn in 2025. There are no limits to where you can take your career.

Job Summary

Operates horizontal and large milling machines/vertical multi-axis CNC machining centers using premanufactured fixtures. Operates wide variety of machines with minimal or no guidance from start to finish including testing new programs. Can inspect parts to operations process sheets and adjust machines as required to meet required tolerances. Responsible for meeting quality requirements and part count daily.

Job Responsibilities
  • Working with groups of machines called cells independently or with others to meet tact time
  • Batching and serializing parts
  • Document work as needed
  • Monitor, change, and set cutters. Including ensuring cutters get changed at appropriate time and set to correct limits stated on tool sheets
  • Following various work instructions (i.e batch card, standard operating procedures, inspection method sheets, operation sheets, tool sheets, etc.)
  • Maintain a clean area
  • Inspect parts with tools provided such as micrometers or indicators to operation sheets
  • Checking and adding coolant as needed along with monitoring and adjusting refractor coolant level
  • Removing metal chips out of machines and swapping/moving barrels of metal chips when full
  • Verify tool offset or work offset or tool length for peers
  • Make adjustments to work offsets or tool lengths/diameter as needed to ensure a quality part
  • Ensure and complete preventative maintenance procedures assigned to cell equipment (i.e. filters, oil levels in spindle, vactra level for ways, etc.)
  • Responsible for machining all parts assigned
  • Ability to run a majority of the product mix
  • Loading and unloading parts for the machines
  • Support in improving and keeping a safe environment
  • Support in providing and completing continuous improvement ideas
  • Other job duties as assigned
Job Qualifications
Required Qualifications
  • High School Diploma or GED equivalent
  • 2+ years of Machining Experience in a manufacturing environment
  • Basic troubleshooting skills; such as identifying tooling issues
  • Familiarity with the use of measuring devices
  • Able to multitask
  • Must be US Person (Citizen or Green Card Holder) or have the ability to obtain the necessary Government licensing to work with controlled technology and products
Preferred Qualifications
  • GKN Experience
  • Ability to read blueprints
  • Experience within an aerospace manufacturing environment preferred
  • Experience with Zimmermann and Simens Control
Physical Requirements
  • Standing and walking (At least 7hrs/day)
  • Ability to carry and lift weight up to 25lbs
  • Bending, squatting, reaching, pushing, and pulling required (At least 2hrs/day)
  • Use of hands for fine dexterity, light and strong grasping (At least 7hrs/day)
Compensation & Benefits

The salary range for this position is $50,886 - $63,608 annually and represents the good faith range GKN has established for the role. Actual compensation offered may vary based on a variety of factors, including, but not limited to the specific role and responsibilities, relevant experience, education, training, certifications, skills, and internal equity considerations.

We’ll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go?

A Great Place to work needs a Great Way of Working

Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we’ve created a culture where everyone feels welcome to contribute. It’s a culture that won us ‘The Best Workplace Culture Award’. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work.

We’re also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know.

We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Operator - Non-Certified (2nd Shift)
Operator - Non-Certified (2nd Shift)

GKN Aerospace • Newington (CT)

On-site
USD 51,000 - 64,000
Medical insurance
Dental insurance
Vision insurance
+3
Operator - Non-Certified (2nd Shift)
Operator - Non-Certified (2nd Shift)

GKN Aerospace company • Newington (CT)

On-site
USD 51,000 - 64,000
Comprehensive benefits package
Performance-based bonus program
CNC Machine Operator - (3rd Shift)
CNC Machine Operator - (3rd Shift)

GKN Aerospace • North Charlestown (NH)

On-site
USD 38,000 - 52,000
Machinist - Non-Certified
Machinist - Non-Certified

GKN Aerospace • Wellington (KS)

On-site
USD 42,000 - 64,000
Machinist - Certified
Machinist - Certified

GKN Aerospace • El Cajon (CA)

On-site
USD 52,000 - 76,000
NC Programmer II
NC Programmer II

GKN Aerospace company • El Cajon (CA)

On-site
USD 62,000 - 90,000
2nd Shift Maintenance Technician
2nd Shift Maintenance Technician

GKN Aerospace company • Muncie (IN)

On-site
USD 42,000 - 62,000
Fabricator - Non-Certified
Fabricator - Non-Certified

GKN Aerospace • Sumner (WA)

On-site
USD 35,000 - 52,000
Technician -Tooling - Weekend Shift (Friday-Sunday, 6:00 AM to 6:00 PM)
Technician -Tooling - Weekend Shift (Friday-Sunday, 6:00 AM to 6:00 PM)

GKN Aerospace company • El Cajon (CA)

On-site
USD 73,000 - 83,000
Engineer, Tooling-CNC Programming
Engineer, Tooling-CNC Programming

GKN Aerospace • Garden Grove (CA)

On-site
USD 90,000 - 130,000