Operations & Maintenance (O&M) Technician

NAES Corporation; Virginia (MN); On-site; USD 48,000 - 68,000; Full time

Job summary

NAES Corporation in Gordonsville, VA, is seeking an Operations & Maintenance (O&M) Technician to ensure reliable operation of the power plant. You will assist start-up/shutdown, operate key auxiliary equipment, perform inspections, and document everything in the CMMS system to support maintenance goals.

The role requires strong troubleshooting, safety awareness, and the ability to follow precise directives from the Control Room Operator.

Qualifications

• High school or better required; technical training preferred.
• Desirable: 2+ years in power plant operations and related industry knowledge.
• Familiarity with CMMS, SAP, and process controls is preferred.

Responsibilities

• Assist in start-up, shutdown, and routine operation of power plant systems.
• Operate key auxiliary equipment to support plant functionality.
• Conduct tests, inspections, and minor repairs to maintain performance.
• Record data, logs, and meter readings accurately for conditions monitoring.
• Follow directives for equipment clearance, tagging, testing, and safety procedures.
• Support maintenance activities and CMMS data entry (SAP work orders).
• Diagnose malfunctions and assist in corrective/preventive tasks as needed.
• Maintain clear documentation and communicate abnormal conditions promptly.
• Work rotating 12-hour shifts including days/nights, weekends, and holidays.

Skills

Power plant operations

Troubleshooting & diagnostics

Safety compliance

Verbal and written communications

MS Office

Driver's License

Education

High School or better

Technical/other training

Tools

SAP CMMS

Job description

Operations & Maintenance (O&M) Technician

Job Category: Operations & Maintenance

Requisition Number: OPERA007898

Posted: August 3, 2026

Full-Time

On-site

Locations

Showing 1 location

Gordonsville
Gordonsville, VA 22942, USA

• Pay or shift range: $34.91 USD to $48.88 USD
  The estimated range is the budgeted amount for this position. Final offers are based on various factors, including skill set, experience, location, qualifications and other job-related reasons.

Description

Gordonsville Power Station, located in Gordonsville, VA is equipped with two 1x1 GE 7EA DLNx dual fuel combined cycle units and two pressure Nooter Ericksen HRSG's featuring dual fuel duct burners. The station also includes a Selective Catalytic Reduction (SCR) system that uses 29% aqueous ammonia for emissions control. With these components, the station achieves a nominal output of 240 MW.

Opportunity Summary

The Operations & Maintenance (O&M) Technician at Gordonsville Power Station is vitally tasked with ensuring the smooth operation of power plant systems through the start-up, shutdown, and routine management of key auxiliary equipment. This role involves conducting inspections, performing necessary repairs, and following precise directives from the Control Room Operator to maintain optimal performance. Additionally, the O&M Technician actively participates in maintenance activities and demonstrates proficiency in using a computerized maintenance management system to support the facility's maintenance goals.

Your scope of responsibility as O&M Technician includes the following primary functions:

• Assist in the start-up, shutdown, and routine operation of power plant systems, ensuring smooth and efficient processes.
• Operate key auxiliary equipment, such as air compressors, demineralized water systems, lube oil cooling systems, hydraulic systems, and locally controlled electrical and mechanical devices, to support overall plant functionality.
• Conduct operating tests and inspections, performing necessary minor repairs and adjustments to maintain optimal equipment performance.
• Follow Control Room Operator directives to clear and prepare equipment for service at isolated panels, including tasks like clearing, tagging, testing, and applying safety tape according to procedures.
• Maintain detailed and accurate logs, ensuring all operational activities are thoroughly documented.
• Monitor and report any abnormal or irregular conditions that occur during operations, taking corrective actions as required within the scope of operating instructions.
• Provide support during maintenance periods, contributing to the upkeep and reliability of plant systems.
• Actively support the use of a computerized maintenance management system (CMMS), demonstrating proficiency in system usage, consistent data entry, and alignment with the facility's maintenance philosophy.
• Accurately record equipment issues and document maintenance actions on SAP work orders, efficiently managing both corrective and preventive tasks while diligently tracking spare parts usage and initiating re-orders as needed.
• Regularly read meters, gauges, and automatic devices to record critical data, such as equipment temperature, vibration levels, hours of operation, pressure, and fluid levels, verifying proper operating conditions.
• Perform visual inspections and listen to equipment at scheduled intervals to detect malfunctions or identify the need for repairs, adjustments, or lubrication.
• Diagnose and troubleshoot mechanical malfunctions or failures in operational equipment, executing repairs, replacements, dismantling, and examination of defective parts. Ensure all components are properly lubricated and cleaned.
• Utilize a Fluke meter and other test equipment to accurately calibrate and repair plant instrumentation and electrical circuits.
• Safely terminate and connect 480 VAC motor wiring, ensuring proper installation and functionality.
• Assist in troubleshooting and inspecting programmable logic controllers (PLCs), plant control systems, and distributed control systems (DCS), including the replacement of control cards and wiring terminations.
• Perform additional tasks as required by the O&M Manager, contributing to the overall efficiency and effectiveness of plant operations.

NAES Safe

Safety is a core value at NAES, and as a condition of employment, all employees are expected to remain mentally alert and work safely at all times. Employees must also adhere to all safety warnings and posted signs while on company property. Additionally, they are required to follow all NAES safety rules and procedures. Adherence to these safety responsibilities is one of the key factors in the evaluation of each employee’s performance.

Working Relationships

The O&M Technician reports to the O&M Manager and takes general direction from the Plant Manager.

Physical Requirements and Working Conditions

Physical requirements include standing for extended periods of time, climbing stairs and ladders, working from elevated platforms and walkways at varying heights, and routinely lifting up to 50 pounds.

Power plant environment that may involve entering confined spaces, crawling through narrow areas, and handling hazardous materials, with exposure to fumes, extreme temperatures, and noise. Work may include high heat near equipment and varying outdoor weather conditions.

Some duties may require the use of protective equipment, which can include hard hats, safety glasses, and eye protection, air masks/respirators, ear protection, chemical suits, flame-resistant clothing (FRC), hot gloves, high-voltage protective gear, and fall protection. Fit testing for respirators may be required. Strict smoking restrictions apply in and around the facility.

Fitness for Duty

All personnel will participate in the Fitness for Duty Program, which includes a post-offer physical examination, drug screening, and post-employment random drug screening.

Work Schedule

The O&M Technician works a rotating 12-hour shift schedule, alternating between days and nights to support continuous 24/7 operations and ensure seamless shift transitions. This position will also occasionally necessitate extended working hours and flexible shifts as needed, including weekends and holidays, in response to schedules, workload demands, and plant conditions. Periodic callouts or “On call” status will also be required.

Compensation

This position offers a base pay rate ranging from $34.91 to $48.88 per hour, along with eligibility for an annual performance bonus.

Core Qualifications and Skills

• Ability to understand procedures and instructions specific to the area of assignment, typically acquired through four years of high school.
• A minimum of two years of experience in power plant operations is desirable. Extensive working knowledge of the power plant industry is also preferred.
• Theoretical and practical knowledge of combustion turbine operations and/or steam turbine operations, electrical systems, industrial safety, regulatory compliance, hazardous waste management, and the inspection/recording of plant parameters is highly desirable.
• Experience with piping and instrument schematics and process controls is desirable.
• Familiarity with the use of a computerized maintenance management system (CMMS), such as SAP, is preferred.
• Excellent written and verbal communication skills.
• Proficiency with MS Office applications.
• Ability to handle multiple tasks effectively.
• Must possess a valid, unrestricted U.S. driver’s license and ensure it remains in good standing at all times.

About NAES

NAES Corporation is a leading provider of operations, maintenance, and engineering services for energy facilities. We have built a reputation as a reliable partner for clients in North America and internationally, offering services across the power generation, oil and gas, and renewable energy sectors. Our growing family of companies allows us to address the entire life cycle of power generation and other industrial plants.

NAES is committed to fostering a diverse and inclusive workplace. We prioritize selecting employees based on merit and competence, seeking individuals of the highest quality, without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, military status, or affiliation protected under USERRA, or any other form of discrimination prohibited by applicable local, state, and federal law.

Qualifications

Skills

Preferred

O&M - Operations & Maintenance

Intermediate

Intermediate

Intermediate

Power Generation

Intermediate

CMMS - Computerized Maintenance Mgmt System

Intermediate

Computer Skills

Intermediate

Electrical Safety and Hazard Awareness

Intermediate

Mechanical Maintenance

Intermediate

P&ID - Piping & Instrumentation Design

Intermediate

Intermediate

Preventive Maintenance

Intermediate

Troubleshooting and Diagnostics

Intermediate

Verbal and Written Communications

Intermediate

Education

Required

High School or better.

Preferred

Technical/other training or better in Power Plant Technology or related field.

Experience

Preferred

A minimum of two years of experience in power plant operations is desirable. Extensive working knowledge of the power plant industry is also preferred.

Theoretical and practical knowledge of combustion turbine operations and/or steam turbine operations, electrical systems, industrial safety, regulatory compliance, hazardous waste management, and the inspection/recording of plant parameters is highly desirable.

Experience with piping and instrument schematics and process controls is desirable.

Familiarity with the use of a computerized maintenance management system (CMMS), such as SAP, is preferred.

Excellent written and verbal communication skills.

Proficiency with MS Office applications.

Ability to handle multiple tasks effectively.

Licenses & Certifications

Required

Driver's License

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws.For further information, please review the Know Your Rights notice from the Department of Labor.