NPI Quality and Metrology Engineer

NIC Global; Gallatin (TN); On-site; USD 80,000 - 92,000; Full time

Benefits offered by this job

Health insurance

Vision insurance

Life insurance

AD&D

Long-term disability

401(k) with employer match

Tuition reimbursement

PTO accrual 80 hours

Holiday pay

Job summary

NIC Global seeks an NPI Quality and Metrology Engineer to perform dimensional inspection using CMMs and portable scanning arms, ensuring conformance to GD&T and ISO standards. You will manage calibration, MSA studies, and PPAP documentation while supporting IATF 16949 compliance.

Ideal candidates have 2–4 years in quality/metrology in manufacturing, strong blueprint reading, and experience with QMS/ERP systems.

Qualifications

• 2–4 years of experience in QA/metrology in manufacturing.
• Knowledge of GD&T (ASME Y14.5).
• Proficient with manual inspection tools and blueprint reading.
• Experience with calibration principles and traceability.
• Experience with MSA / Gage R&R studies.
• Familiarity with PPAP and AIAG core tools.
• Understanding of IATF 16949 / ISO 9001.
• Proficient with MS Office; QMS/ERP experience a plus.

Responsibilities

• Perform dimensional inspection using CMM; generate reports and compare to drawings.
• Operate portable scanning/rover arms for 3D geometry capture.
• Maintain calibration control system and due-date tracking.
• Calibrate measurement equipment per procedures and ISO standards.
• Conduct MSA studies and interpret results for process decisions.
• Prepare PPAP documentation and quality records.
• Document non-conformances and escalate as needed.
• Maintain quality records, logs, and audit documentation.
• Support IATF 16949 audits with calibration docs.
• Collaborate with Quality/Manufacturing/Design to resolve issues.

Skills

GD&T knowledge

Manual inspection

Blueprint reading

MSA / Gage R&R

IATF 16949 knowledge

QMS / ERP systems

Tools

CMM equipment

Portable scanning arms

Minitab

Job description

Salary Range: $80,000.00 To $92,000.00 Annually

NIC Global is a single-source manufacturer providing turn-key mechanical and electromechanical assembly, expert sheet metal fabrication, and global sourcing of metal and plastic components. We provide products to great customers such as Philips, PACCAR (Kenworth & Peterbilt), Schweitzer Engineering Laboratories, Physio Controls, and Leviton to name a few. Our growing company employs over 600 people in Washington, Tennessee, Ohio, and Texas.

Come work with us and experience our fun atmosphere that provides a great place to work and grow your career. Employees are celebrated through quarterly employee appreciation events, holiday parties, cook outs, company gifts, and various other employee events and recognition programs. We feel that great companies value their employees, and those employees are vital to the overall success of the entire organization.

In addition to an outstanding company culture, NIC Global offers other great benefits including:

Eligible for insurance 1 st of the month after 30 days, including:

• Choice of two health insurance plans
• Employer paid life insurance, AD&D, and long-term disability plans
• Vision Insurance
• Additional Life Insurance
• Critical illness insurance
• Federal health and dependent care savings accounts (FSA)
• 401(k) plan, with employer match
• Tuition Reimbursement

Other benefits include PTO accrual of 80 hours in the 1 st year, increasing with length of service milestones and 80 hours of holiday pay per year.

The NPI Quality and Metrology Engineer is responsible for dimensional inspection and measurement of manufactured parts using Coordinate Measuring Machines (CMM), portable scanning arms, and manual inspection tools. This role supports calibration control, Measurement System Analysis (MSA), and PPAP documentation to ensure compliance with customer (PACCAR) and IATF 16949 quality requirements.

Essential Functions

• Perform dimensional inspection of parts using CMM equipment, generating detailed measurement reports and analyzing results against engineering drawings and GD&T specifications.
• Operate portable scanning/rover arm equipment to capture 3D part geometry and compare against CAD models for deviation analysis.
• Maintain the calibration control system, including scheduling, tracking due dates, and ensuring all gauges and measurement equipment are within calibration.
• Perform internal calibration of measurement equipment per established procedures and applicable standards (e.g., ISO 17025 practices where applicable).
• Conduct Measurement System Analysis (MSA) studies, including Gage R&R, bias, linearity, and stability studies, and interpret results for process capability decisions.
• Prepare and compile PPAP (Production Part Approval Process) documentation, including dimensional layouts, control plans, and supporting quality records for customer submission.
• Identify and document non-conforming measurement results and escalat as needed.
• Maintain accurate quality records, calibration logs, MSA study results and audit documentation.
• Support internal and external audits (IATF 16949) by providing calibration and measurement documentation as requested.
• Collaborate with Quality, Manufacturing, and Design teams to resolve dimensional non-conformances.

Required Qualifications

• 2–4 years of experience in a quality assurance/metrology role within a manufacturing environment.
• Knowledge of GD&T (ASME Y14.5), including interpretation of complex tolerance stack-ups, datum reference frames, and true position calculations.
• Proficiency with manual inspection tools and blueprint reading.
• Working knowledge of calibration principles and traceability requirements.
• Experience conducting or supporting MSA studies (Gage R&R).
• Familiarity with PPAP requirements and documentation (AIAG core tools).
• Understanding of IATF 16949 / ISO 9001 quality management systems.
• Proficiency with Microsoft Office (Excel, Word, PowerPoint); experience with quality management software (QMS/ERP systems) and simulation software a plus.

Preferred Qualifications

• Hands-on experience operating CMM equipment.
• Experience with portable scanning/rover arm measurement systems.
• Clear written and verbal communication skills, with the ability to train and coach production associates.
• Ability to read and interpret engineering drawings, blueprints, and technical specifications.
• Experience with statistical software (Minitab or similar) and MSA analysis.
• Familiarity with APQP, and AIAG core tools.

Physical Requirements

• Ability to stand/walk for extended periods on the manufacturing floor.
• Ability to lift up to 25–35 lbs (parts, gauges, fixtures).
• Use of personal protective equipment (PPE) as required by site safety policy.

Salary Range: $80,000.00 To $92,000.00 Annually

NIC Global is a single-source manufacturer providing turn-key mechanical and electromechanical assembly, expert sheet metal fabrication, and global sourcing of metal and plastic components. We provide products to great customers such as Philips, PACCAR (Kenworth & Peterbilt), Schweitzer Engineering Laboratories, Physio Controls, and Leviton to name a few. Our growing company employs over 600 people in Washington, Tennessee, Ohio, and Texas.

Come work with us and experience our fun atmosphere that provides a great place to work and grow your career. Employees are celebrated through quarterly employee appreciation events, holiday parties, cook outs, company gifts, and various other employee events and recognition programs. We feel that great companies value their employees, and those employees are vital to the overall success of the entire organization.

In addition to an outstanding company culture, NIC Global offers other great benefits including:

Eligible for insurance 1 st of the month after 30 days, including:

• Choice of two health insurance plans
• Employer paid employee dental Insurance
• Employer paid life insurance, AD&D, and long-term disability plans
• Vision Insurance
• Additional Life Insurance
• Accident insurance
• Critical illness insurance
• Federal health and dependent care savings accounts (FSA)

Eligible after 6 months:

• 401(k) plan, with employer match
• Tuition Reimbursement

Other benefits include PTO accrual of 80 hours in the 1 st year, increasing with length of service milestones and 80 hours of holiday pay per year.

The NPI Quality and Metrology Engineer is responsible for dimensional inspection and measurement of manufactured parts using Coordinate Measuring Machines (CMM), portable scanning arms, and manual inspection tools. This role supports calibration control, Measurement System Analysis (MSA), and PPAP documentation to ensure compliance with customer (PACCAR) and IATF 16949 quality requirements.

Essential Functions

• Perform dimensional inspection of parts using CMM equipment, generating detailed measurement reports and analyzing results against engineering drawings and GD&T specifications.
• Operate portable scanning/rover arm equipment to capture 3D part geometry and compare against CAD models for deviation analysis.
• Maintain the calibration control system, including scheduling, tracking due dates, and ensuring all gauges and measurement equipment are within calibration.
• Perform internal calibration of measurement equipment per established procedures and applicable standards (e.g., ISO 17025 practices where applicable).
• Conduct Measurement System Analysis (MSA) studies, including Gage R&R, bias, linearity, and stability studies, and interpret results for process capability decisions.
• Prepare and compile PPAP (Production Part Approval Process) documentation, including dimensional layouts, control plans, and supporting quality records for customer submission.
• Identify and document non-conforming measurement results and escalat as needed.
• Maintain accurate quality records, calibration logs, MSA study results and audit documentation.
• Support internal and external audits (IATF 16949) by providing calibration and measurement documentation as requested.
• Collaborate with Quality, Manufacturing, and Design teams to resolve dimensional non-conformances.

Required Qualifications

• 2–4 years of experience in a quality assurance/metrology role within a manufacturing environment.
• Knowledge of GD&T (ASME Y14.5), including interpretation of complex tolerance stack-ups, datum reference frames, and true position calculations.
• Proficiency with manual inspection tools and blueprint reading.
• Working knowledge of calibration principles and traceability requirements.
• Experience conducting or supporting MSA studies (Gage R&R).
• Familiarity with PPAP requirements and documentation (AIAG core tools).
• Understanding of IATF 16949 / ISO 9001 quality management systems.
• Proficiency with Microsoft Office (Excel, Word, PowerPoint); experience with quality management software (QMS/ERP systems) and simulation software a plus.

Preferred Qualifications

• Hands-on experience operating CMM equipment.
• Experience with portable scanning/rover arm measurement systems.
• Clear written and verbal communication skills, with the ability to train and coach production associates.
• Ability to read and interpret engineering drawings, blueprints, and technical specifications.
• Experience with statistical software (Minitab or similar) and MSA analysis.
• Familiarity with APQP, and AIAG core tools.

Physical Requirements

• Ability to stand/walk for extended periods on the manufacturing floor.
• Ability to lift up to 25–35 lbs (parts, gauges, fixtures).
• Use of personal protective equipment (PPE) as required by site safety policy.

7:00 am until 4:30 pm Monday thru Thursday and 7:00 am until 11:00 am on Fridays.

40 hours per week.