NDTE Visual Dimensional Inspector Auditor LPC

Precision Castparts Corp.

Portland (OR)

On-site

USD 65,000 - 90,000

Full time

5 days ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Precision Castparts Corp. in Portland, OR, is seeking an experienced NDT Inspector/Auditor to perform comprehensive quality audits, engineering evaluations, and NADCAP related tasks. You will lead investigations into inspector escapes and contribute to root-cause analysis and cost-reduction initiatives.

The role requires at least 6–7 years of hands-on inspection experience, NDT certification, and strong communication skills. On-site work with exposure to aerospace-quality processes and audits.

Qualifications

  • Must be certified in at least one of the five NDT disciplines (x-ray, digital x-ray, FPI, Visual, or Dimensional Inspection).
  • Must have completed 8 hours of auditor training and perform 2 practice audits.
  • Minimum 6–7 years of actual inspection time with few escapes or quality issues.
  • Strong knowledge of NDT principles and related methods.
  • Excellent written and verbal communication skills.
  • Ability to apply and adapt numerous technical procedures under supervision.
  • Ability to develop NDT work instructions for x-ray, visual, dimensional and FPI.
  • Ability to plan, schedule, and coordinate major projects.
  • May require hazardous waste training.
  • Working knowledge of Excel, Word and PowerPoint.

Responsibilities

  • Perform outgoing quality audits for Visual, Dimensional, Film X-Ray, Digital X-Ray, Penetrant and/or Magnetic Particle inspections.
  • Conduct engineering evaluations on casting quality for internal/external customers.
  • Carry out annual assessments of NDT personnel and processes.
  • Lead investigations into customer escapes within 48 hours of notification.
  • Prepare formal reports detailing audit results and root causes.
  • Conduct annual eye exams as required.
  • Perform annual or semiannual process audits across NDT disciplines.
  • Assist with NADCAP audits and trainer coverage during absences.
  • Perform stamp audits and interface with customers professionally.
  • Identify cost reduction opportunities and support throughput during end-of-quarter requirements.
  • Develop and administer root cause and corrective action forms.

Skills

NDT certification
Auditor training
Inspection experience
NDT knowledge
Written and verbal communication
Procedures adaptation
Develop work instructions
Project planning
Hazardous waste training
Excel/Word/PowerPoint

Tools

Excel
Word
PowerPoint

Job description

Location

Country: United States of America

State / County: Oregon

City: Portland

Division: Structurals

Company: LPC

Function: Operations

Workplace Type: On-Site

Position type: Full Time

Opportunity ID

25047

Job Description

MISSION:

The primary responsibility of this position is to perform actual inspector audits, outgoing quality audits, system performance audits, NADCAP audits, stamp audits and certification audits. Other responsibilities include but not limited to customer complaints due to NDT issues, perform investigations on inspector escapers, perform eye examinations, perform Engineering Evaluations, assist in on-the-job training of new inspectors and cost reduction projects. They must work closely with the Responsible Level 3 and take direction on course of action due to the above breakdown in specification requirements.

PRINCIPAL ACCOUNTABILITIES:

  1. Perform outgoing quality audits for Visual Inspection, Dimensional Inspection, Film X-Ray inspection, Digital X-Ray inspection, Penetrant inspection and/or magnetic particle inspection.
  2. Perform Engineering evaluations to provide detailed information on casting quality for internal and external Customers' use.
  3. Perform at least one annual assessment audit of every X-ray shooter, X-ray reader, FPI inspector, FPI processer, magnetic particle inspector and/or Visual & Dimensional inspector.
  4. Perform or assist in the investigation of all customer escapes and concerns within 48 hours of notification from the quality department.
  5. Write reports for Quality on the actual results of escape instigations.
  6. Perform annual eye exams.
  7. Perform annual or semiannual process audits for FPI, x-ray and digital x-ray, visual, dimensional, magnetic particle.
  8. Assist with NADCAP audit.
  9. Assist NDT trainers when they are out on vacation or other functions.
  10. Perform stamp audits.
  11. Must interface with customers in a professional manner.
  12. Identify potential areas of cost reductions.
  13. Be able to assist manufacturing during end of quarter requirements for throughput.
  14. Write and assist at administering root cause and corrective action forms.
  15. Perform root cause and corrective actions on breakdowns in process requirements
  16. Performing grain etch evaluation and reporting.

QUALIFICATIONS:

  1. Must be certified in at least one of the five disciplines in NDT (x-ray, digital x-ray, FPI, Visual Inspection, and Dimensional Inspection).
  2. Must have taken and passed 8 hours of auditor training and perform 2 practice audits with a certified auditor/trainer.
  3. Must have at least 6-7 years of actual inspection time with very few escapes or quality issues.
  4. Considerable knowledge of and familiarity with NDT principles as well as a working knowledge of NDT methods other than those not currently used at the facility.
  5. Excellent and effective written and verbal communication skills.
  6. Ability to apply and adapt a wide variety of technical procedures under general direction and to complete work independently.
  7. Ability to develop x-ray, visual, dimensional and FPI work instructions.
  8. Ability to plan, schedule, evaluate and coordinate a wide variety of major projects.
  9. Maybe required to complete hazardous waste management training.
  10. Working knowledge of Excel, Word and PowerPoint computer programs.
National Security and Export Controls

This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)). To comply with those regulations, this position may require applicants to be U.S. Persons (i.e., U.S. citizens, U.S. lawful permanent residents, protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required export authorizations from the U.S. Department of State or the U.S. Department of Commerce.

About PCC

With more than 120 operations and approximately 20,000 employees worldwide, Precision Castparts Corp. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications. In addition, we are the leading producer of airfoil castings for the industrial gas turbine market. We also manufacture extruded seamless pipe, fittings, and forgings for power generation and oil & gas applications; commercial and military airframe aerostructures; and metal alloys and other materials for the casting and forging industries. With such critical applications, we insist on quality and dependability - not just in the materials and products we make, but in the people we recruit.

PCC is relentless in its dedication to being a high-quality, low-cost and on-time producer; delivering the highest value to its customers while continually pursuing strategic, profitable growth.

In 2016, Berkshire Hathaway, led by Chairman and CEO Warren E. Buffett, acquired Precision Castparts Corp.

Precision Castparts Corp. and its affiliates do not accept unsolicited resumes from search firms or employment agencies. Unsolicited resumes will become the property of Precision Castparts Corp & its affiliates, and no fee will be paid.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

NDTE Visual Dimensional Inspector Auditor LPC
NDTE Visual Dimensional Inspector Auditor LPC

Precision Castpart • Salem (OR)

On-site
USD 70,000 - 95,000
TiAl Visual Dimensional Inspector - Deer Creek (Portland, OR)
TiAl Visual Dimensional Inspector - Deer Creek (Portland, OR)

Precision Castparts Corp. • Milwaukie (OR)

On-site
USD 52,000 - 78,000
NDT Technician Lv 1 - (Titanium X-Ray) - Weekend
NDT Technician Lv 1 - (Titanium X-Ray) - Weekend

Precision Castparts Corp. • Ogden (UT)

On-site
USD 30,000 - 39,000
TiAl Visual Dimensional Inspector - Deer Creek (Portland, OR)
TiAl Visual Dimensional Inspector - Deer Creek (Portland, OR)

Precision CastParts • Milwaukie (OR)

On-site
USD 65,000 - 90,000
NDT Area Manager SSBO
NDT Area Manager SSBO

Precision CastParts • Oregon

On-site
USD 110,000 - 170,000
NDT Technician Lv 1 - (Titanium X-Ray) - Day Shift
NDT Technician Lv 1 - (Titanium X-Ray) - Day Shift

Precision Castparts Corp. • Ogden (UT)

On-site
USD 60,000 - 80,000
Visual Dimensional Inspector SSB1
Visual Dimensional Inspector SSB1

Precision Castparts Corp. • Oregon

On-site
USD 52,000 - 83,000
On-the-job training
Certification courses (Visual/Dim Dim)
NDT Technician Level 1 - (Titanium FPI) Weekend Graveyard Shift
NDT Technician Level 1 - (Titanium FPI) Weekend Graveyard Shift

Precision Castparts Corp. • Ogden (UT)

On-site
USD 52,000 - 78,000
Visual Dimensional Inspector LPC LSBS 071
Visual Dimensional Inspector LPC LSBS 071

Precision CastParts • Portland (OR)

On-site
USD 52,000 - 76,000
Radiologic Evaluator LPC LSBS 076
Radiologic Evaluator LPC LSBS 076

Precision Castparts Corp. • Portland (OR)

On-site
USD 65,000 - 90,000