Millwright NCCER - Austin Industrial (Pasadena, TX)

Austin Industries; Pasadena (TX); On-site; USD 62,000 - 90,000; Full time

Job summary

Austin Industrial is seeking a skilled Millwright NCCER for industrial maintenance and heavy equipment installation. The role requires five years of journeyman experience, a valid driver's license, and NCCER preferred but not required.

You will work on machinery installation, alignment, and preventative maintenance across customer sites. Responsibilities include assembling, aligning, testing, and dismantling equipment, reading blueprints, and ensuring safety compliance.

Qualifications

• Education: No minimum requirement.
• Experience: Minimum 5 years of Journeyman level experience.
• Certifications/Licenses: Millwright NCCER preferred (Not required) & Valid Driver's License is required.

Responsibilities

• Replace defective parts of machine or adjust clearances and alignment of moving parts.
• Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
• Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
• Repair and lubricate machines and equipment.
• Assemble and install equipment, using hand tools and power tools.
• Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings, to determine work procedures.
• Signal crane operator to lower basic assembly units to bedplate and align unit to centerline.
• Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
• Move machinery and equipment, using hoists, dollies, rollers, and trucks.
• Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
• Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
• Lay out mounting holes, using measuring instruments, and drill holes with power drill.
• Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
• Level bedplate and establish centerline, using straightedge, levels, and transit.
• Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
• Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
• Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team.
• Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
• Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
• Other duties as assigned.
• Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position.

Skills

Journeyman experience

Safety mindset

Mechanical aptitude

Education

No formal education required

Job description

About Austin Industrial

Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries.

About Austin Industrial

Austin Industrial provides premier self-perform maintenance, construction, and soft craft service to leading industrial companies across the U.S. An industry leader for more than 60 years, we offer single-source solutions to our customers in the oil, gas, chemical, food, agriculture, power, and manufacturing industries. To learn more about us, visit https://www.austin-ind.com/what-we-do/industrial.

Millwright NCCER

Must be able to install, repair, replace and dismantle the machinery and heavy equipment used in industrial settings. This is accomplished by performing the following essential duties and responsibilities. Other duties may be assigned.

Specific Duties And Responsibilities

• Replace defective parts of machine or adjust clearances and alignment of moving parts.
• Align machines and equipment, using hoists, jacks, hand tools, squares, rules, micrometers, and plumb bobs.
• Connect power unit to machines or steam piping to equipment, and test unit to evaluate its mechanical operation.
• Repair and lubricate machines and equipment.
• Assemble and install equipment, using hand tools and power tools.
• Position steel beams to support bedplates of machines and equipment, using blueprints and schematic drawings, to determine work procedures.
• Signal crane operator to lower basic assembly units to bedplate and align unit to centerline.
• Insert shims, adjust tension on nuts and bolts, or position parts, using hand tools and measuring instruments, to set specified clearances between moving and stationary parts.
• Move machinery and equipment, using hoists, dollies, rollers, and trucks.
• Attach moving parts and subassemblies to basic assembly unit, using hand tools and power tools.
• Assemble machines, and bolt, weld, rivet, or otherwise fasten them to foundation or other structures, using hand tools and power tools.
• Lay out mounting holes, using measuring instruments, and drill holes with power drill.
• Bolt parts, such as side and deck plates, jaw plates, and journals, to basic assembly unit.
• Level bedplate and establish centerline, using straightedge, levels, and transit.
• Dismantle machines, using hammers, wrenches, crowbars, and other hand tools.
• Shrink-fit bushings, sleeves, rings, liners, gears, and wheels to specified items, using portable gas heating equipment.
• Dismantle machinery and equipment for shipment to installation site, usually performing installation and maintenance work as part of team.
• Construct foundation for machines, using hand tools and building materials such as wood, cement, and steel.
• Operate engine lathe to grind, file, and turn machine parts to dimensional specifications.
• Other duties as assigned.
• Applicants must be legally authorized to work for ANY employer in the United States. Austin is unable to sponsor or take over sponsorship of an employment visa for this position.

Qualifications Required For This Position

Education: No minimum requirement

Experience: Minimum 5 years of Journeyman level experience.

Certifications/Licenses: Millwright NCCER preferred (Not required) & Valid Driver's License is required.

Physical, Mental & Environmental Requirements

Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of this position.

Employees must be able to sit, stand, walk, climb, balance, stoop, kneel, crouch, crawl, reach, and use hands and fingers to perform assigned duties. Positions may require lifting, carrying, pushing, or pulling up to 50 pounds, working at elevations, on uneven surfaces, or in confined spaces. Employees must possess sufficient visual, hearing, communication, and motor skills to safely perform job responsibilities.

Employees must be able to read, comprehend, and follow safety procedures, work instructions, and company policies; exercise sound judgment; solve problems; maintain attention to detail; effectively manage stress; and adapt to changing priorities in a fast-paced work environment.

Work may be performed in industrial and construction environments with exposure to weather conditions, temperature extremes, noise, dust, fumes, moving equipment, vibration, and other site-specific hazards. Employees must be able to wear required personal protective equipment (PPE) and meet all customer, site, regulatory, medical, and fitness-for-duty requirements applicable to the position.

Must be able to perform all job duties while maintaining a constant commitment to safety, quality, and productivity expectations.

Austin Industrial is an Equal Opportunity Employer

See the “Know Your Rights” poster available in English and Spanish.

No Third-Party Inquiries Please

This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so (payment must be required pursuant to the terms of a written agreement).

Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company.

Accessibility Note

If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the People Services Team at [phone].