Mig Welder in Cedar Park

Energy Jobline ZR; Cedar Park (TX); On-site; USD 48,000 - 72,000; Full time

Job summary

MALEKO PERSONNEL is seeking an experienced welder to fit, assemble, weld, and finish precision sheet metal components. The role centers on GTAW (TIG) welding with high-quality output from engineering drawings and work instructions.

Onsite work requires reading blueprints, performing fit-up, welding thin-gauge metal, and finishing to specification. The ideal candidate has 3+ years of welding/fabrication experience in manufacturing, with proficiency in carbon steel, stainless, and aluminum, plus

Qualifications

• Read and interpret blueprints, weld symbols, engineering drawings, and work instructions.
• Perform fit-up, tack welding, GTAW (TIG) welding, grinding, and finishing operations.
• Fabricate and assemble carbon steel, stainless steel, and aluminum components.
• Weld thin-gauge sheet metal and fabricated assemblies down to .036" material thickness.
• Perform spot welding, stud welding, and robotic welding operations as required.
• Install PEM hardware, rivet nuts, inserts, studs, and related hardware.
• Perform drilling, tapping, countersinking, and secondary fabrication operations.
• Inspect completed work for dimensional and visual compliance to drawing requirements.
• Accurately complete production documentation and work order transactions.
• Support production schedules and execute work according to established priorities.
• Maintain a clean, safe, and organized work environment in accordance with 5S standards.
• Perform routine operator preventive maintenance (PM) activities on assigned equipment.
• Conduct daily equipment inspections and promptly report abnormalities, safety concerns, quality concerns, or maintenance issues.
• Maintain tools, fixtures, and equipment in good working condition.
• Participate in continuous improvement activities that improve safety, quality, delivery, and cost.
• Perform other work-related tasks as assigned.
• Comply with all company policies, including Health, Safety, and Environmental (HSE) requirements.

Responsibilities

• Read and interpret blueprints, weld symbols, engineering drawings, and work instructions.
• Perform fit-up, tack welding, GTAW (TIG) welding, grinding, and finishing operations.
• Fabricate and assemble carbon steel, stainless steel, and aluminum components.
• Weld thin-gauge sheet metal and fabricated assemblies down to .036" material thickness.
• Perform spot welding, stud welding, and robotic welding operations as required.
• Install PEM hardware, rivet nuts, inserts, studs, and related hardware.
• Perform drilling, tapping, countersinking, and secondary fabrication operations.
• Inspect completed work for dimensional and visual compliance to drawing requirements.
• Accurately complete production documentation and work order transactions.
• Support production schedules and execute work according to established priorities.
• Maintain a clean, safe, and organized work environment in accordance with 5S standards.
• Perform routine operator preventive maintenance (PM) activities on assigned equipment.
• Conduct daily equipment inspections and promptly report abnormalities, safety concerns, quality concerns, or maintenance issues.
• Maintain tools, fixtures, and equipment in good working condition.
• Participate in continuous improvement activities that improve safety, accuracy, quality, delivery, and cost.
• Perform other work-related tasks as assigned.
• Comply with all company policies, including Health, Safety, and Environmental (HSE) requirements.

Skills

Reading blueprints

Weld symbols

GTAW TIG welding

Engineering drawings

Fabrication

Sheet metal fabrication

Aluminum welding

Robotic welding

Overhead crane

Quality standards

Finishing operations

Education

High school diploma or GED

Job description

Job DescriptionJob Description

JOB SUMMARY

The welder will be responsible for fitting, assembling, welding, and finishing precision sheet metal and fabricated components in support of production requirements. This position performs GTAW (TIG) welding as the primary welding process and is expected to produce high-quality work from engineering drawings, work instructions, and established quality standards. Work is performed onsite.

JOB RESPONSIBILITIES

• Read and interpret blueprints, weld symbols, engineering drawings, and work instructions.
• Perform fit-up, tack welding, GTAW (TIG) welding, grinding, and finishing operations.
• Fabricate and assemble carbon steel, stainless steel, and aluminum components.
• Weld thin-gauge sheet metal and fabricated assemblies down to .036" material thickness.
• Perform spot welding, stud welding, and robotic welding operations as required.
• Install PEM hardware, rivet nuts, inserts, studs, and related hardware.
• Perform drilling, tapping, countersinking, and secondary fabrication operations.
• Inspect completed work for dimensional and visual compliance to drawing requirements.
• Accurately complete production documentation and work order transactions.
• Support production schedules and execute work according to established priorities.
• Maintain a clean, safe, and organized work environment in accordance with 5S standards.
• Perform routine operator preventive maintenance (PM) activities on assigned equipment.
• Conduct daily equipment inspections and promptly report abnormalities, safety concerns, quality concerns, or maintenance issues.
• Maintain tools, fixtures, and equipment in good working condition.
• Participate in continuous improvement activities that improve safety, quality, delivery, and cost.
• Perform other work-related tasks as assigned.
• Comply with all company policies, including Health, Safety, and Environmental (HSE) requirements.

QUALIFICATIONS

• High school diploma or GED.
• Minimum 3 years of welding and fabrication experience in a manufacturing environment.
• Demonstrated GTAW (TIG) welding experience.
• Ability to read and interpret engineering drawings and weld symbols.
• Experience welding carbon steel, stainless steel, and aluminum.
• Experience with sheet metal fabrication and assembly.
• Experience welding thin-gauge sheet metal.
• Experience with robotic welding operations.
• Experience with spot welding and stud welding.
• Experience in a high-mix, low-volume manufacturing environment.
• Overhead crane experience.
• Ability to perform welding, fabrication, grinding, and finishing operations for extended periods of time.

WORK ENVIRONMENT

• Working conditions are normal for a manufacturing environment.
• Work involves frequent lifting of materials and products up to 40 pounds.
• Machinery operation requires the use of safety equipment, including but not limited to: eye safety glasses, hearing protectors, steel-toed work boots, and hard hats.
• Works under immediate supervision.
• While performing the duties of this job, the employee may be exposed to fumes, vapors, or airborne particles, moving mechanical parts, and vibrations. The noise level in the work environment can be loud.

PHYSICAL DEMANDS

The physical demands described here are representative of those that must be met by a worker to successfully perform the essential functions of this job. The essential functions, pursuant to the Americans with Disabilities Act, may include the characteristic duties, responsibilities, knowledge, skills, and abilities noted herein; however, this is not a comprehensive listing of all functions and tasks performed by positions found in this job description. While performing the duties of this job, the worker must have the ability to understand, remember, and apply oral and/or written instructions or other information. Regularly required to talk or hear and frequently required to sit, stand, stoop, and walk; use hands to finger, handle, or feel; and reach with hands and arms (lifting, carrying, pushing, or pulling). The worker must frequently lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, vision, peripheral vision, depth perception, and the ability to adjust focus. The work may be exposed to intermittent sounds of a loud nature.

Company Description

MALEKO PERSONNEL is the leader in specialized industrial, production, and logistics staffing. We represent a variety of professionals, including assembly, shipping, receiving, and inventory control specialists, certified forklift drivers, and warehouse professionals. If you're looking for short-term or long-term assignments, competitive pay rates, and a variety of shift options you owe it to yourself to give MALEKO PERSONNEL a look. MALEKO has proudly put together a team of highly skilled and seasoned professionals who understand and embrace the pursuit of customer satisfaction and are ready to work for you!

Company DescriptionMALEKO PERSONNEL is the leader in specialized industrial, production, and logistics staffing. We represent a variety of professionals, including assembly, shipping, receiving, and inventory control specialists, certified forklift drivers, and warehouse professionals. If you're looking for short-term or long-term assignments, competitive pay rates, and a variety of shift options you owe it to yourself to give MALEKO PERSONNEL a look. MALEKO has proudly put together a team of highly skilled and seasoned professionals who understand and embrace the pursuit of customer satisfaction and are ready to work for you!