Mechanical & Implant Packaging Principal Engineer

Synchron

San Diego (CA)

On-site

USD 160,000 - 200,000

Full time

19 hours ago
Be an early applicant

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Job summary

Synchron is seeking a Principal R&D Engineer to own the mechanical design and packaging of next-generation implantable electronics from concept through verification and production. The role covers hermetic enclosures, feedthroughs, and headers, plus packaging for external systems and power paddles.

Responsibilities include defining hermeticity, managing external partners, and ensuring biocompatibility and RF transparency while meeting ISO 13485 and 14971 guidelines.

Qualifications

  • BS in mechanical engineering or related discipline; MS preferred.
  • 10+ years mechanical design of medical devices or high-reliability electronic products.
  • Hermetic packaging experience (glass, ceramic, or metal), including feedthroughs and sealing processes
  • Material selection and design for biocompatibility (ISO 10993)
  • Thermal analysis (FEA or CFD) correlated with measurement
  • SolidWorks, GD&T, and tolerance stack-up analysis
  • Design of assembly and test fixtures
  • Experience directing external design houses and contract manufacturers from prototype through production
  • Working within design controls (ISO 13485, ISO 14971)

Responsibilities

  • Design the hermetic implant enclosure in glass or ceramic, including joining and sealing processes (laser welding, brazing, glass-frit or laser glass bonding) and any metal components
  • Define hermeticity and internal-environment requirements; specify helium leak and residual gas testing, desiccants or getters
  • Design PCBA and flex mounting and the interconnect to feedthroughs; manage CTE mismatch, shock, and vibration
  • Design the header and lead connection: contacts, retention, sealing, strain relief, and electrical isolation between channels
  • Integrate antennas and coils within the header and enclosure with RF and power engineers, preserving RF transparency
  • Verify lead and header durability: flex fatigue, pull strength, fluid ingress, and long-term soak
  • Model and test implant and paddle thermal behavior, including inductive heating of metal components; hold tissue and skin temperatures within ISO 14708-1 and IEC 60601-1 limits
  • Select materials and processes to ISO 10993; address biostability, cleaning, sterilization compatibility, and MRI considerations
  • Design the inductive power paddle: coil housing, skin-contact thermal management, ergonomics, ingress protection, and cable strain relief
  • Design external cabling, connectors, and enclosures for external electronics, with DFM for molded and machined parts
  • Design fixtures for development, assembly, test, and production: welding and bonding, electrical and hermeticity test, mechanical test, and burn-in
  • Produce GD&T drawings and tolerance analyses; transfer designs to contract manufacturers; support process validation (IQ/OQ/PQ) and PFMEA
  • Author design inputs, DFMEA, and V&V protocols (shock, vibration, drop, pull, flex, ISO 14708-1 mechanical tests); support regulatory submissions
  • Specify, review, and accept work from external design and manufacturing partners, including first-article inspection

Skills

GD&T
Thermal analysis (FEA/CFD)
External partner management
Design for manufacturing (DFM)
Regulatory compliance experience ISO 1

Education

BS in mechanical engineering or related discipline
MS preferred

Tools

SolidWorks
Tolerance stack-up analysis
COMSOL
ANSYS

Job description

TITLE

Principal R&D Engineer, Mechanical & Implant Packaging

DATE

November 2026

WORK LOCATION

In-Office 5x/week in San Diego

BASE SALARY RANGE

$160k - $200k

About The Role

We are seeking a Principal Mechanical Engineer to own the mechanical design and packaging of Synchron's next-generation implantable electronics, from concept through design verification and production. The core of the role is the implant: a hermetic enclosure in glass or ceramic, its feedthroughs, and the header that connects the implant to its lead. The role also owns packaging for the external system, including the inductive power paddle, external cabling, and enclosures for external electronics.

Thermal performance and biocompatibility are central design drivers. The engineer works as primary designer and/or directs external engineering design and manufacturing partners, and builds the fixturing that development, test, and production depend on. This is a hands-on role, partnering closely with electrical, RF, firmware, and systems engineers within a medical device design-controls framework.

Key Responsibilities
Hermetic Enclosure & Feedthroughs
  • Design the hermetic implant enclosure in glass or ceramic, including joining and sealing processes (laser welding, brazing, glass-frit or laser glass bonding) and any metal components
  • Design or specify feedthroughs (co-fired ceramic, brazed-pin, or glass-to-metal); define pin count, pitch, and layout with electrical engineering
  • Define hermeticity and internal-environment requirements; specify helium leak and residual gas testing, desiccants or getters
  • Design PCBA and flex mounting and the interconnect to feedthroughs; manage CTE mismatch, shock, and vibration
Header & Lead Interface
  • Design the header and lead connection: contacts, retention, sealing, strain relief, and electrical isolation between channels
  • Integrate antennas and coils within the header and enclosure with RF and power engineers, preserving RF transparency
  • Verify lead and header durability: flex fatigue, pull strength, fluid ingress, and long-term soak
Thermal & Biocompatibility
  • Model and test implant and paddle thermal behavior, including inductive heating of metal components; hold tissue and skin temperatures within ISO 14708-1 and IEC 60601-1 limits
  • Select materials and processes to ISO 10993; address biostability, cleaning, sterilization compatibility, and MRI considerations
External Device Packaging
  • Design the inductive power paddle: coil housing, skin-contact thermal management, ergonomics, ingress protection, and cable strain relief
  • Design external cabling, connectors, and enclosures for external electronics, with DFM for molded and machined parts
Fixturing, Manufacturing & Design Controls
  • Design fixtures for development, assembly, test, and production: welding and bonding, electrical and hermeticity test, mechanical test, and burn-in
  • Produce GD&T drawings and tolerance analyses; transfer designs to contract manufacturers; support process validation (IQ/OQ/PQ) and PFMEA
  • Author design inputs, DFMEA, and V&V protocols (shock, vibration, drop, pull, flex, ISO 14708-1 mechanical tests); support regulatory submissions
  • Specify, review, and accept work from external design and manufacturing partners, including first-article inspection
Required Qualifications
  • BS in mechanical engineering or related discipline; MS preferred
  • 10+ years mechanical design of medical devices or high-reliability electronic products
  • Hermetic packaging experience (glass, ceramic, or metal), including feedthroughs and sealing processes
  • Material selection and design for biocompatibility (ISO 10993)
  • Thermal analysis (FEA or CFD) correlated with measurement
  • SolidWorks, GD&T, and tolerance stack-up analysis
  • Design of assembly and test fixtures
  • Experience directing external design houses and contract manufacturers from prototype through production
  • Working within design controls (ISO 13485, ISO 14971)
Preferred Qualifications
  • Active implantable device experience (neurostimulators, cochlear implants, cardiac rhythm devices), including headers and leads
  • Glass or ceramic enclosures, laser glass bonding, active brazing, and co-fired ceramic feedthroughs
  • Multiphysics modeling (COMSOL or ANSYS) for thermal and structural analysis
  • Silicone, LSR, and polymer molding and overmolding; cable assembly design
  • Hermeticity testing (helium leak, RGA) and accelerated aging
  • MRI-conditional design considerations; ISO 14708-1/-3 and IEC 60601-1 for external devices
  • Wearable or skin-contact device design and ergonomics
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mechanical & Implant Principal Packaging Engineer
Mechanical & Implant Principal Packaging Engineer

Synchron • San Diego (CA)

On-site
USD 160,000 - 200,000
Principal Mechanical Engineer
Principal Mechanical Engineer

Synchron • San Diego (CA)

On-site
USD 175,000 - 200,000
Senior Implant Packaging Engineer - Hermetic Medical Devices
Senior Implant Packaging Engineer - Hermetic Medical Devices

Synchron • San Diego (CA)

On-site
USD 160,000 - 200,000
Principal Mechanical Engineer
Principal Mechanical Engineer

SYNCHRON • San Diego (CA)

On-site
USD 175,000 - 200,000
Senior Principal: Implant Packaging & Hermetic Design
Senior Principal: Implant Packaging & Hermetic Design

Synchron • San Diego (CA)

On-site
USD 160,000 - 200,000
Mechanical Engineering Manager - Advanced Medical Devices
Mechanical Engineering Manager - Advanced Medical Devices

Synchron • San Diego (CA)

On-site
USD 175,000 - 200,000
Principal R&D Engineer, RF & Impant Power (opens in new tab) San Diego, CA →
Principal R&D Engineer, RF & Impant Power (opens in new tab) San Diego, CA →

Synchron, Inc. • San Diego (CA)

On-site
USD 160,000 - 200,000
Mechanical Engineering Manager - Advanced Medical Devices (opens in new tab) San Diego, CA →
Mechanical Engineering Manager - Advanced Medical Devices (opens in new tab) San Diego, CA →

Synchron, Inc. • San Diego (CA)

On-site
USD 175,000 - 200,000
Lead Mechanical Engineer - Implantable Medical Devices
Lead Mechanical Engineer - Implantable Medical Devices

Synchron Inc. • San Diego (CA)

On-site
USD 175,000 - 200,000
Principal Mechanical Design Engineer
Principal Mechanical Design Engineer

Real • California

On-site
USD 120,000 - 180,000
Medical Insurance
Dental Insurance
Vision Coverage
+1