Mechanical Engineer II

Avery Bio

California

On-site

USD 95,000 - 140,000

Full time

4 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

Avery Bio in San Diego, CA is seeking a hands-on Mechanical Engineer to design, prototype, and build instrument hardware across Avery’s platforms. You will move from concept CAD to rapid prototypes and reliable, manufacturable designs, collaborating with electrical, software, microfluidics, and biology teams.

This high-ownership role requires taking modules from sketch to build, with a focus on robust hardware and repeatable processes. Travel to the San Diego office may be required.

Qualifications

  • Minimum of 3 years of mechanical engineering experience in life-science instruments, diagnostics, semiconductor equipment, or a similar hardware-intensive field, with proven ability to take devices from concept through working prototype to production-ready design.
  • B.S. in Mechanical Engineering with at least 3 years of relevant experience.
  • Expert SolidWorks user: large multi-part assemblies, detailed drawings, GD&T, and PDM-based revision control.
  • Demonstrated experience designing fluidic control, distribution, and integration. Microfluidics and flow cell direct design experience is highly desirable.
  • General knowledge and experience in PCB integration, thermal control, sensors, and motion.
  • Strong hands-on prototyping skills: 3D printing (FDM/SLA), basic machining, and the shop judgment to get parts made fast.
  • Tolerance analysis and precision-alignment design experience at chip- or optics-scale interfaces.
  • Sealing and gasket design experience for fluidic systems is beneficial.
  • FEA or multiphysics simulation experience (SolidWorks Simulation, COMSOL) is beneficial.
  • Motion systems (stages, actuators) and instrument enclosure design (sheet metal, ingress protection) experience is beneficial.
  • Experience working with contract manufacturers and quick-turn vendors, including quoting, inspection, and quality feedback.
  • Familiarity with laboratory environments and chemical compatibility of materials with reagents and solvents is beneficial.
  • Strong interpersonal and collaborative skills, with a willingness to contribute in cross-disciplinary technical environments.
  • Proven ability to thrive in fast-paced, start-up environments, showing flexibility, initiative, and a growth-oriented mindset.

Responsibilities

  • Design instrument subsystems and platforms assigned: layout, detailed CAD (SolidWorks), drawings, and BOMs across chip bring-up systems, R&D development stations, and production-ready instruments.
  • Design the chip-interface hardware at the heart of each system: chip clamping and alignment mechanisms, pogo-pin socketing, flow cells with gasketed sealing, and the mechanical integration of flow cell, daughterboard, and instrument.
  • Design thermal management for chips and electronics: TEC-based or resistive-heater-based chip temperature control, heat sinking and airflow for on-board FPGAs and power electronics, with supporting thermal analysis and verification.
  • Develop fluidic subsystems: manifolds, valves, pumps, and reagent and waste handling, with attention to serviceability and leak containment around electronics.
  • Drive rapid prototyping as the default mode of work: 3D printing, quick-turn machining, and hands-on builds; bring up and debug hardware on the bench alongside the team.
  • Perform tolerance stack-up analysis on critical interfaces (chip seating, sealing, electrical contact, fluidic alignment) and verify performance with measurement.
  • Take designs from prototype to low-volume production: DFM/DFA, material selection, and vendor selection and management for machined, sheet-metal, and molded parts.
  • Maintain design documentation: controlled drawings with GD&T, CAD and PDM revision hygiene, ECOs, and assembly procedures.
  • Partner with electrical, software, microfluidics, and biology teams to integrate boards, cabling, sensors, and consumables into coherent, reliable instruments.
  • Contribute to IP strategy and patent filings where relevant.
  • Other duties as assigned.

Skills

Prototyping
Tolerance analysis
Team collaboration
Start-up mindset

Education

B.S. in Mechanical Engineering
3+ years experience

Tools

SolidWorks
COMSOL
3D printing
PCB integration

Job description

Avery is a trailblazer in developing transformative technologies to solve the world’s most pressing biological and industrial challenges. We are building the world’s first fully automated genetic engineering platform—an end-to-end system that integrates novel semiconductor-based chips to scale the synthesis, assembly, and testing of genetic components in both cell-free and cellular environments. This unified platform bridges the digital and biological realms, enabling unprecedented speed and precision in bioengineering. Our mission is to revolutionize industries—from drug discovery and precision medicine to advanced materials and sustainable agriculture—by unlocking the full potential of programmable biology.

If you’re passionate about shaping the future of biotechnology and want to work at the cutting edge of science and engineering, we’d love to hear from you. Help us unlock and accelerate the engineering of life.

Mechanical Engineer

Avery Bio is seeking a hands-on Mechanical engineer to join our growing platform engineering team to help design, prototype, and build instrument hardware across Avery’s platforms, from chip-interface fixtures and bring-up systems to fully integrated instruments. This is a high-ownership role for an engineer who enjoys moving quickly from concept to working hardware and iterate design based on real test data.

As a Mechanical Engineer on the platform engineering team, you will work independently and take ownership of modules, while collaborating effectively in a team environment. You will design and optimize modules that run Avery’s transformative chip-based genetic engineering platforms. You will take chip-interface hardware, fluidic subsystems, and complete benchtop instruments from concept CAD through rapid prototypes to reliable, manufacturable designs, working daily with electrical, software, microfluidics, and biology teams. This is a hands-on role for an engineer who moves fast from a sketch to build, working hardware, and who brings the design discipline to make that hardware robust and repeatable.

The engineer in this role will directly impact design-to-prototype cycle, de-risk critical subsystems through hands-on testing, and have a meaningful impact on platform performance, reliability, and timeline to platform delivery.

Duties and Responsibilities
  • Design instrument subsystems and platforms assigned: layout, detailed CAD (SolidWorks), drawings, and BOMs across chip bring-up systems, R&D development stations, and production-ready instruments.
  • Design the chip-interface hardware at the heart of each system: chip clamping and alignment mechanisms, pogo-pin socketing, flow cells with gasketed sealing, and the mechanical integration of flow cell, daughterboard, and instrument.
  • Design thermal management for chips and electronics: TEC-based or resistive-heater-based chip temperature control, heat sinking and airflow for on-board FPGAs and power electronics, with supporting thermal analysis and verification.
  • Develop fluidic subsystems: manifolds, valves, pumps, and reagent and waste handling, with attention to serviceability and leak containment around electronics.
  • Drive rapid prototyping as the default mode of work: 3D printing, quick-turn machining, and hands-on builds; bring up and debug hardware on the bench alongside the team.
  • Perform tolerance stack-up analysis on critical interfaces (chip seating, sealing, electrical contact, fluidic alignment) and verify performance with measurement.
  • Take designs from prototype to low-volume production: DFM/DFA, material selection, and vendor selection and management for machined, sheet-metal, and molded parts.
  • Maintain design documentation: controlled drawings with GD&T, CAD and PDM revision hygiene, ECOs, and assembly procedures.
  • Partner with electrical, software, microfluidics, and biology teams to integrate boards, cabling, sensors, and consumables into coherent, reliable instruments.
  • Contribute to IP strategy and patent filings where relevant.
  • Other duties as assigned.
Qualifications and Education

Minimum of 3 years of mechanical engineering experience in life-science instruments, diagnostics, semiconductor equipment, or a similar hardware-intensive field, with proven ability to take devices from concept through working prototype to production-ready design. Background in synthetic biology or biotechnology is a plus.

  • B.S. in Mechanical Engineering or a closely related field with at least 3 years of relevant experience.
  • Expert SolidWorks user: large multi-part assemblies, detailed drawings, GD&T, and PDM-based revision control.
  • Demonstrated experience designing fluidic control, distribution, and integration. Microfluidics and flow cell direct design experience is highly desirable.
  • General knowledge and experience in PCB integration, thermal control, sensors, and motion.
  • Strong hands-on prototyping skills: 3D printing (FDM/SLA), basic machining, and the shop judgment to get parts made fast.
  • Tolerance analysis and precision-alignment design experience at chip- or optics-scale interfaces.
  • Sealing and gasket design experience for fluidic systems is beneficial.
  • FEA or multiphysics simulation experience (SolidWorks Simulation, COMSOL) is beneficial.
  • Motion systems (stages, actuators) and instrument enclosure design (sheet metal, ingress protection) experience is beneficial.
  • Experience working with contract manufacturers and quick-turn vendors, including quoting, inspection, and quality feedback.
  • Familiarity with laboratory environments and chemical compatibility of materials with reagents and solvents is beneficial.
  • Strong interpersonal and collaborative skills, with a willingness to contribute in cross-disciplinary technical environments.
  • Proven ability to thrive in fast-paced, start-up environments, showing flexibility, initiative, and a growth-oriented mindset.
Working Conditions
  • Under standard working conditions, this position is based in our San Diego, CA office.
  • Prolonged periods of sitting at a desk and working on a computer.
  • As a critical and essential role, the candidate must be willing and able to travel to the San Diego, CA office to report to work.
  • Ability to lift up to 20 pounds and perform repetitive tasks such as lifting, standing, pipetting, preparing samples, and operating equipment for extended periods.
  • The candidate must be comfortable working in a laboratory environment.
  • The candidate will be exposed to hazardous materials in accordance with all safety protocols and regulatory guidelines.

Avery is an equal opportunity employer and values diversity. We seek to promote equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Scientist
Scientist

Avery Bio • San Diego (CA)

On-site
USD 110,000 - 150,000
Hands-on Mechanical Engineer, Biotech Instrumentation
Hands-on Mechanical Engineer, Biotech Instrumentation

Avery Bio • California

On-site
USD 95,000 - 140,000
Sr Analog IC Design Engineer
Sr Analog IC Design Engineer

Avery Bio • San Diego (CA)

On-site
USD 122,000 - 149,000
Mechanical Engineer
Mechanical Engineer

Sapho Bio • San Diego (CA)

On-site
USD 120,000 - 150,000
Health coverage
401(k) with company matching
Equity options
+1
Systems Design Engineer – Bioengineering
Systems Design Engineer – Bioengineering

ThermoFisher Scientific • Pleasanton (CA)

On-site
USD 108,000 - 144,000
Medical and dental plans
Vision plan
401(k) plan with company match
+1
Hardware Engineering Manager
Hardware Engineering Manager

Beckman Coulter Life Sciences • Loveland (CO)

On-site
USD 125,000 - 150,000
Health insurance
401(k)
Paid time off
Mechanical Designer
Mechanical Designer

Inscripta • Augusta (GA)

On-site
USD 60,000 - 80,000
Senior Mechanical Engineer
Senior Mechanical Engineer

Bio-Rad Laboratories, Inc. • Pleasanton (CA)

On-site
USD 121,000 - 167,000
Senior Mechanical Engineer
Senior Mechanical Engineer

ProteinSimple • San Jose (CA)

On-site
USD 132,000 - 218,000
Medical insurance
Dental insurance
Vision insurance
+11
Mechanical Engineer II
Mechanical Engineer II

Speedrun Talent Network • Fremont (CA)

On-site
USD 100,000 - 120,000