Mechanical Engineer - Additive Tank Product Design & Development Technical Lead - Level 5

0904 SP - Space Components

United States

Presencial

USD 161.000 - 241.000

Jornada completa

14 días+

Una candidatura completa en un minuto

Currículum y carta de presentación personalizados, listos para enviar.

Supera los filtros ATS

Ventajas ofrecidas por este puesto de trabajo

Relocation assistance

Descripción de la vacante

Northrop Grumman’s Mission Enabling Products team in Commerce, CA seeks a Mechanical Engineer - Additive Tank Product Design & Development Lead (Level 5) to own and drive the design and qualification of complex tank hardware for space systems. You will lead cross-functional teams spanning requirements, analysis, and manufacturing, leveraging additive methods and GD&T to meet product goals.

The role demands leadership across design, verification, and tooling, with strong emphasis on risk

Formación

  • Bachelor’s degree in mechanical/aerospace with 12+ years of relevant experience, or Master’s with 10+ years, or PhD with 8+ years.
  • Demonstrated technical leadership of complex mechanical products from requirements through design, analysis, manufacturing, verification, and qualification.
  • Demonstrated experience with additive manufacturing or other advanced manufacturing methods and the ability to incorporate these into technical roadmaps.
  • Advanced experience with mechanical design, requirements development, engineering definition, GD&T, interface control, and tolerance analysis.
  • Experience directing structural and thermal analyses and using results to make product-level decisions.
  • Experience leading multidisciplinary teams, design reviews, verification planning, and technical-risk resolution without direct reporting authority.
  • Ability to obtain and maintain the required security clearance.

Responsabilidades

  • Own and control product-line requirements, architecture, configurations, interfaces, design rules, verification methods, and the product technical baseline.
  • Lead mechanical design of tanks, domes, joints, supports, interfaces, and associated hardware.
  • Direct structural, thermal, pressure, fatigue, fracture, buckling, and other required analyses, including model validation and test correlation.
  • Own functional GD&T, datum architecture, tolerance stacks, critical characteristics, acceptance criteria, and engineering-definition release; obtain documented manufacturability and inspectability concurrence from the Additive Manufacturing Lead.
  • Review DFM/DFA assessments led by the Additive Manufacturing Lead and decide how recommendations are incorporated into the controlled product design.
  • Approve design allowables, criteria, and margins using data and capability evidence from the Additive Manufacturing Lead.
  • Own joint performance, geometry, interfaces, fits, and acceptance requirements; coordinate with Additive Manufacturing Lead on joining-process development.
  • Define product-critical, assembly, handling, integration, and test-tooling requirements, including loads, interfaces, accuracy, and acceptance criteria.
  • Agree on tooling classification before work begins.
  • Define characteristics, tolerances, acceptance criteria, and verification closure; the Additive Manufacturing Lead owns manufacturing inspection methods and process controls.
  • Own product verification and qualification, including test articles, instrumentation, acceptance criteria, analysis-to-test correlation, and requirements closure.
  • Approve changes affecting requirements, form, fit, function, interfaces, design margins, or product qualification, and define the documented manufacturing envelope within which manufacturing changes may be controlled.
  • Lead integrated issue resolution when product performance or design risk is primary; require concurrence from the Additive Manufacturing Lead when both technical baselines are affected.
  • Recommend design maturity and engineering release.
  • Overall program authorization requires the separate manufacturing-readiness recommendation of the Additive Manufacturing Lead.
  • Mentor engineers and communicate product maturity, margins, risks, decisions, and recommendations to program leadership.

Conocimientos

Technical leadership
Additive manufacturing
Mechanical design
GD&T
Tolerance analysis
Cross-functional teamwork
Clearance eligibility

Educación

Bachelor’s degree in mechanical or aerospace engineering
Master’s degree in related STEM discipline
PhD in related STEM discipline

Herramientas

CAD/PLM

Descripción del empleo

RELOCATION ASSISTANCE: Relocation assistance may be available

CLEARANCE REQUIRED FOR START: No

CLEARANCE TYPE: None

TRAVEL: Yes, 10% of the Time

Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Northrop Grumman’s Space Sector is seeking a Mechanical Engineer - Additive Tank Product Design & Development Technical Lead - Level 5 to join our Mission Enabling Products MEP Team. This position will be located in Commerce, CA. Northrop Grumman Mission Enabling Products (MEP) Business Unit designs, builds, and delivers space, defense and aviation-related systems to customers around the world. Our main products include satellites and associated space components and services, launch vehicles and related propulsion systems, missile products, subsystems and defense electronics, precision weapons, armament systems, and advanced aerospace structures.

Job responsibilities include, but are not limited to, the following:
  • Own and control product-line requirements, architecture, configurations, interfaces, design rules, verification methods, and the product technical baseline.
  • Lead mechanical design of tanks, domes, joints, supports, interfaces, and associated hardware.
  • Direct structural, thermal, pressure, fatigue, fracture, buckling, and other required analyses, including model validation and test correlation.
  • Own functional GD&T, datum architecture, tolerance stacks, critical characteristics, acceptance criteria, and engineering-definition release; obtain documented manufacturability and inspectability concurrence from the Additive Manufacturing Lead.
  • Review DFM/DFA assessments led by the Additive Manufacturing Lead and decide how recommendations are incorporated into the controlled product design.
  • Approve design allowables, criteria, and margins using process data and capability evidence supplied by the Additive Manufacturing Lead.
  • Own joint performance, geometry, interfaces, fits, and acceptance requirements; coordinate with the Additive Manufacturing Lead on joining-process development and qualification.
  • Define product-critical, assembly, handling, integration, and test-tooling requirements, including loads, interfaces, accuracy, and acceptance criteria.
  • Agree on tooling classification before work begins.
  • Define characteristics, tolerances, acceptance criteria, and verification closure; the Additive Manufacturing Lead owns manufacturing inspection methods and process controls.
  • Own product verification and qualification, including test articles, instrumentation, acceptance criteria, analysis-to-test correlation, and requirements closure.
  • Approve changes affecting requirements, form, fit, function, interfaces, design margins, or product qualification, and define the documented manufacturing envelope within which manufacturing changes may be controlled.
  • Lead integrated issue resolution when product performance or design risk is primary; require concurrence from the Additive Manufacturing Lead when both technical baselines are affected.
  • Recommend design maturity and engineering release.
  • Overall program authorization requires the separate manufacturing-readiness recommendation of the Additive Manufacturing Lead.
  • Mentor engineers and communicate product maturity, margins, risks, decisions, and recommendations to program leadership.
Basic Qualifications
  • Bachelor’s degree in mechanical engineering, aerospace engineering, or a related STEM discipline with 12 years of relevant engineering experience; OR Master’s degree in a related STEM discipline with 10 years of relevant experience; or a PhD in a related STEM discipline with 8 years of relevant experience.
  • Demonstrated technical leadership of complex mechanical products from requirements through design, analysis, manufacturing, verification, and qualification.
  • Demonstrated experience with additive manufacturing or other advanced manufacturing methods and the ability to incorporate these into technical roadmaps.
  • Advanced experience with mechanical design, requirements development, engineering definition, GD&T, interface control, and tolerance analysis.
  • Experience directing structural and thermal analyses and using results to make product-level decisions.
  • Experience leading and influencing cross functional technical teams and effectively interfacing with customers and senior leadership.
  • Experience with pressure-containing, highly loaded, or similarly complex hardware.
  • Experience leading multidisciplinary teams, design reviews, verification planning, and technical-risk resolution without direct reporting authority.
  • Ability to obtain and maintain the required security clearance
Preferred Qualifications
  • Experience with tanks, pressure vessels, propulsion hardware, or aerospace structures.
  • Experience designing metal additively manufactured hardware.
  • Knowledge of fatigue, fracture mechanics, damage tolerance, buckling, and pressure-system qualification.
  • Experience developing scalable product families or common product architectures.
  • Experience defining and overseeing tooling for assembly, handling, integration, and test.
  • Familiarity with machining, joining, inspection, additive-process qualification, CAD/PLM, requirements management, and configuration control.

Primary Level Salary Range: $161,000.00 - $241,400.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.

The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.

Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class.

U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

We are a pioneering company. With careers across all areas: air, cyber, land, sea and space – our 90,000 employees work as one to defend and define the future. Northrop Grumman careers and internships are as varied as your interests, with a lifetime of potential that will give you every opportunity to do your best work. Working together with people from many backgrounds, personal passions and disciplines, we share a drive to push the boundaries of science, technology and engineering to meet the ever evolving needs of our customers worldwide.

Working at Northrop Grumman is more than just a paycheck. We offer a comprehensive Total Rewards and benefits package designed to help you thrive at work and in life.

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Mechanical Engineer - Additive Tank Product Design & Development Technical Lead - Level 5
Mechanical Engineer - Additive Tank Product Design & Development Technical Lead - Level 5

Northrop Grumman • Commerce (CA)

Presencial
USD 161.000 - 241.000
Health insurance
Life and disability insurance
Savings plan
+2
Mechanical Engineer - Additive Tank Product Design & Development Technical Lead - Level 5
Mechanical Engineer - Additive Tank Product Design & Development Technical Lead - Level 5

Northrop Grumman • California

Presencial
USD 161.000 - 241.000
Engineering Designer – Level 3/4
Engineering Designer – Level 3/4

Northrop Grumman • EE. UU.

Presencial
USD 89.000 - 134.000
Health insurance
Life and disability insurance
Savings plan
+2
Staff Mechanical Engineer - 20630
Staff Mechanical Engineer - 20630

0090 CORP-Corporate Office • EE. UU.

Presencial
USD 139.000 - 209.000
Relocation assistance may be available
Discretionary bonus
Annual bonuses
Mechanical Design Engineers Level 2
Mechanical Design Engineers Level 2

Northrop Grumman • EE. UU.

Presencial
USD 82.000 - 123.000
Health insurance
Discretionary bonus
Paid time off
Mechanical Engineer - Level 5 - Space Vehicle SE/AI&T Lead - Linthicum
Mechanical Engineer - Level 5 - Space Vehicle SE/AI&T Lead - Linthicum

0090 CORP-Corporate Office • EE. UU.

Presencial
USD 169.000 - 254.000
Health insurance
Life insurance
Disability insurance
+2
Mechanical Technician (Level 2)
Mechanical Technician (Level 2)

Northrop Grumman • EE. UU.

Presencial
USD 38.000 - 64.000
Health insurance
Life and disability insurance
Savings plan
+2
Structural Analyst Engineer - Level 2
Structural Analyst Engineer - Level 2

0904 SP - Space Components • EE. UU.

Presencial
USD 92.000 - 138.000
Relocation assistance
Total Rewards program
Principal Engineer Process
Principal Engineer Process

0090 CORP-Corporate Office • EE. UU.

Presencial
USD 104.000 - 155.000
9/80 Work Schedule (where available)
Education Assistance
Training and Development
Sr. Engineering Design Manager – 3
Sr. Engineering Design Manager – 3

Northrop Grumman • San Diego (CA)

Presencial
USD 175.000 - 263.000
Total Rewards package