Mechanical Designer, Automation & Controls (Starship Launch Pad)

Spacex

Texas

Presencial

USD 90.000 - 130.000

Jornada completa

14 días+

Consigue una respuesta de este empleador

Tu currículum y tu carta de presentación, adaptados exactamente a lo que buscan contratar.

Supera los filtros ATS

Descripción de la vacante

SpaceX in the United States seeks a Mechanical Designer to join the Starship Launch Pad team. You will bridge architecture and build by designing electrical schematics, sizing conveyances, interfacing with fluids and mechanical components, and detailing control panels for launch pad environments.

Candidates should have a Bachelor's in engineering and 2+ years CAD experience; familiarity with NEC/NFPA 79, EPlan, weldments, and hazardous area installations is a plus.

Formación

  • Bachelor's degree in engineering required.
  • 2+ years of professional experience using CAD tools to design and model mechanical, fluid, or electrical systems.

Responsabilidades

  • Detail electrical schematics in collaboration with automation & controls engineers.
  • Perform conduit fill calculations and initial sizing of conveyances.
  • Create CAD models and drawings of conduits, control panels, bracketry, and related access provisions.
  • Perform basic structural analysis to ensure designs are robust for launch pad environments.
  • Translate designs into planning for field installation.
  • Document designs and best practices.

Conocimientos

CAD tools
Electrical schematics
Conduit sizing
Structural analysis
Weldment design
Equipment interfacing

Educación

Bachelor's degree in engineering

Herramientas

EPlan
NX
SolidWorks

Descripción del empleo

Mechanical Designer, Automation & Controls (Starship Launch Pad)

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal ofenabling human life on Mars.

MECHANICAL DESIGNER, AUTOMATION & CONTROLS (STARSHIP LAUNCH PAD)

The Starship Tower & Launch Mount team is looking for controls designers to help make the next generation of launch pads a reality. This role will be focused on bridging the gap between system architecture and build – that is, developing electrical schematics, sizing conveyances, interfacing with fluids and mechanical components, detailed design of conduits and bracketry, and design of control panels. These systems will be involved in interfacing with the next generation of Starship vehicles, catching both stages, and reaching a rapid and automated flight cadence requiring no manual actions between launches.

RESPONSIBILITES:
  • Detail electrical schematics in collaboration with automation & controls engineers who architect the systems
  • Perform conduit fill calculations and initial sizing of conveyances
  • Create CAD models and drawings of conduits, control panels, bracketry, and related access provisions
  • Perform basic structural analysis and use best practices to ensure designs are sufficiently robust for the challenging environment of the launch pad
  • Translate designs into planning as the basis for install in the field
  • Documentation of designs as well as best practices
BASIC QUALIFICATIONS:
  • Bachelor's degree in a science or engineering discipline
  • 2+ years of professional experience using CAD tools (NX, CATIA, SolidWorks, Fusion 360, or similar) to design and model mechanical, fluid, or electrical systems
PREFERRED SKILLS AND EXPERIENCE:
  • Familiarity with design of weldments and sheet metal structures
  • Experience using EPlan
  • Knowledge of NEC, NFPA 79 codes
  • Experience designing and installing instrumentation and control systems in hazardous areas (NFPA 70 Section 500 installations); Class 1, Division 1 and Division 2 environments or IEC equivalence
  • Capable of solving problems with little to no supervision on schedule as an individual or as a member of an integrated team
  • Excellent communication skills, both written and verbal
  • Experience in fast-paced, demanding iterative design and manufacturing environments
ADDITIONAL REQUIREMENTS:
  • Role may require extended hours, weekend work, and shift schedules that vary depending on site operational needs; flexibility required
  • Stand: Up to 6 hours per day
  • Sit: Up to 6 hours per day
  • Push/Pull: Up to ≤ 50 lbs. (unassisted) 15 minutes or less per day
  • Overhead reach: Up to 3 hours per day
  • Walk: Up to 10 hours per day
  • Lift/Carry: Up to ≤ 25 lbs. (unassisted) 15 minutes or less per day
  • Climb (ladder/stairs): Up to 10 hours per day
  • Kneel/Crouch: Up to 3 hours per day
  • Upper body twist: Up to 3 hours per day
  • Ability to work in temperatures over 80 degrees 6 hours or greater per day
  • Candidate must be capable of safely working at heights (up to 500ft), in confined spaces, using an air purifying respirator, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the job description
  • Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review.
  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX's ... should reach out toEEOCompliance@spacex.com .

Consigue la evaluación confidencial y gratuita de tu currículum.

o arrastra y suelta tu archivo aquí

Similar jobs

Puestos de trabajo similares que vale la pena comparar

Mechanical Designer, Automation & Controls (Starship Launch Pad)
Mechanical Designer, Automation & Controls (Starship Launch Pad)

SpaceX • Brownsville (TX)

Presencial
USD 70.000 - 90.000
Automation & Controls Specialist, Launch Pad (Starship)
Automation & Controls Specialist, Launch Pad (Starship)

SpaceX • Brownsville (TX)

Presencial
USD 90.000 - 140.000
Automation & Controls Engineer (Starship)
Automation & Controls Engineer (Starship)

SpaceX • Texas

Presencial
USD 75.000 - 95.000
Competitive pay
Unique engineering challenges
Opportunities for advancement
Automation & Controls Specialist (Starship)
Automation & Controls Specialist (Starship)

SpaceX • Florida

Presencial
USD 80.000 - 100.000
Automation & Controls Engineer, Infrastructure & Utility (Starship)
Automation & Controls Engineer, Infrastructure & Utility (Starship)

SpaceX • Brownsville (TX)

Presencial
USD 90.000 - 140.000
Mechanical Engineer, Launch Mount/Tower (Starship)
Mechanical Engineer, Launch Mount/Tower (Starship)

Starlink • Texas

Presencial
USD 90.000 - 150.000
Sr. Automation & Controls Engineer, Infrastructure & Utility (Starship)
Sr. Automation & Controls Engineer, Infrastructure & Utility (Starship)

SpaceX • Texas

Presencial
USD 130.000 - 180.000
Mechanical Engineer, Launch Mount/Tower (Starship)
Mechanical Engineer, Launch Mount/Tower (Starship)

SpaceX • Starbase (TX)

Presencial
USD 120.000 - 180.000
Automation & Controls Specialist, Infrastructure & Utility (Starship) - Level 4/5
Automation & Controls Specialist, Infrastructure & Utility (Starship) - Level 4/5

SpaceX • Texas

Presencial
USD 120.000 - 160.000
Mechanical Engineer, Launch Mount/Tower (Starship)
Mechanical Engineer, Launch Mount/Tower (Starship)

SpaceX • Brownsville (TX)

Presencial
USD 110.000 - 180.000