Mechanical Design Engineer, Advanced Concepts

BETA Technologies, Inc.

United States

Hybrid

USD 120,000 - 140,000

Full time

14 days+

Get a reply from this employer

Your resume and cover letter, tailored to exactly what they’re hiring for.

Get past ATS filters

Benefits offered by this job

RSU/PSU equity participation
Onsite healthcare (VT) and medical/ded
Daily lunch provided
Flight lessons

Job summary

BETA Technologies, Inc. is seeking a Mechanical Design Engineer to develop high-lift-device mechanisms and installations for an advanced narrowbody aircraft. The role involves converting aerodynamic and system requirements into practical flap and slat hardware, with interface definitions and product documentation.

This position is based onsite at our South Burlington, VT office and our Raleigh, NC office. Remote candidates may be considered for a hybrid role, with monthly visits to South

Qualifications

  • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related field.
  • Three or more years of aerospace mechanical design, mechanism design, actuation, or aircraft installation experience.
  • Proficiency with CATIA, 3DEXPERIENCE, or a comparable CAD and drawing environment.
  • Working knowledge of kinematics, bearings, joints, fasteners, tolerances, geometric dimensioning and tolerancing, and mechanical load paths.
  • Experience supporting hardware through design, build, fit check, and test.
  • Must be a US Person to be considered for the role.

Responsibilities

  • Develop three-dimensional CAD, layouts, drawings, and interface definition for high-lift mechanisms, supports, tracks, hinges, linkages, actuation, sensors, and installation hardware.
  • Build and evaluate kinematic and packaging models across the required operating envelope.
  • Perform preliminary calculations and trade studies for mechanism loads, geometry, bearings, fasteners, tolerances, stiffness, clearances, and mass.
  • Design for assembly, rigging, inspection, maintenance, lubrication, wear, repair, manufacturing, and test access.
  • Support tolerance analysis, drawing release, configuration control, supplier coordination, prototype build, fit checks, and functional testing.
  • Work with High-Lift Aerodynamics, Loads, Structures, Stress, Systems Integration, Flight Controls, Safety, Manufacturing, and Test.

Skills

CATIA
3DEXPERIENCE
CAD software

Education

Bachelor’s degree in Mechanical or Aerospace Engineering

Job description

At BETA Technologies, we apply our intellectual curiosity, passion for aviation, and commitment to sustainability toward a shared mission of revolutionizing electric aviation. Regardless of the position one holds, each team member brings their talent and desire to positively impact the environment and lives of others in a refreshing, vibrant, and inclusive culture.

The Mechanical Design Engineer will develop high-lift-device mechanisms and installations for an advanced narrowbody aircraft. The role will turn aerodynamic and system requirements into practical flap and slat hardware, kinematics, actuation interfaces, and configuration-controlled product definition. This position will be based onsite at our South Burlington, VT office location, our Raleigh, NC office. Remote candidates may be considered for a hybrid role, with monthly visits to South Burlington, VT for in person work.

How you will contribute to revolutionizing electric aviation:
  • Develop three-dimensional CAD, layouts, drawings, and interface definition for high-lift mechanisms, supports, tracks, hinges, linkages, actuation, sensors, and installation hardware
  • Build and evaluate kinematic and packaging models across the required operating envelope
  • Perform preliminary calculations and trade studies for mechanism loads, geometry, bearings, fasteners, tolerances, stiffness, clearances, and mass
  • Design for assembly, rigging, inspection, maintenance, lubrication, wear, repair, manufacturing, and test access
  • Support tolerance analysis, drawing release, configuration control, supplier coordination, prototype build, fit checks, and functional testing
  • Work with High-Lift Aerodynamics, Loads, Structures, Stress, Systems Integration, Flight Controls, Safety, Manufacturing, and Test
  • Document assumptions, interfaces, design decisions, open risks, and verification needs
Minimum Qualifications
  • Bachelor’s degree in Mechanical Engineering, Aerospace Engineering, or a related field
  • Three or more years of aerospace mechanical design, mechanism design, actuation, or aircraft installation experience
  • Proficiency with CATIA, 3DEXPERIENCE, or a comparable CAD and drawing environment
  • Working knowledge of kinematics, bearings, joints, fasteners, tolerances, geometric dimensioning and tolerancing, and mechanical load paths
  • Experience supporting hardware through design, build, fit check, and test
  • Must be a US Person to be considered for the role
Above and Beyond Qualifications
  • Aircraft flap, slat, control-surface, landing-gear, door, actuation, or other mechanism-design experience
  • Experience with hydraulic or electromechanical actuation, rigging, wear, lubrication, maintainability, or jam-risk assessment
  • Experience supporting prototype or flight-test aircraft in a fast-paced development environment
Physical Demands and Work Environment

This role requires extended computer and CAD work and regular work around aircraft, mechanisms, laboratories, manufacturing areas, and test equipment. Occasional travel, hands-on hardware work, and use of a standard protecting equipment may be required.

The wage listed here reflects our best faith estimate for this role. We pay competitively and base compensation on a variety of factors including skills, experience, industry background, and the evolving needs of the role. We remain committed to fair and equitable pay and we're happy to discuss during the interview process.

Compensation
  • $120,000 — $140,000 USD
Benefits
  • This role includes both Restricted Stock Units and Performance Stock Units for all full-time team members, so everyone shares in our success.
  • You’ll have access to onsite healthcare in Vermont, comprehensive medical coverage, dental and vision, short- and long-term disability, and paid parental leave.
  • Daily lunch provided.
  • Flight lessons are part of the experience, along with a range of additional perks that make work here genuinely rewarding.

We are an equal opportunity employer. Employment decisions are based on merit, competence and qualifications and will not be influenced in any manner on race, color, religion, age, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, disability, veteran or military status, genetic information, pregnancy, or any other protected characteristic under federal, state, or local law. BETA complies with all applicable federal, state and local non-discrimination laws and does not tolerate discrimination of any kind in our workplace.

Employment offers are contingent upon the successful completion of a background check. BETA Technologies participates in E-Verify.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Mechanical Design Engineer – Advanced Concepts
Mechanical Design Engineer – Advanced Concepts

BETA Technologies, Inc. • South Burlington (VT)

Hybrid
USD 120,000 - 140,000
Onsite healthcare in Vermont
Medical, dental & vision coverage
Disability insurance
+3
Senior Mechanical Design Engineer, Advanced Concepts
Senior Mechanical Design Engineer, Advanced Concepts

BETA Technologies, Inc. • United States

Hybrid
USD 155,000 - 185,000
RSUs
PSUs
Onsite healthcare in Vermont
+1
Computational Design Engineer, Advanced Concepts
Computational Design Engineer, Advanced Concepts

BETA Technologies, Inc. • United States

Hybrid
USD 120,000 - 140,000
Restricted Stock Units
Performance Stock Units
Onsite healthcare
+7
Structures Design Engineer - Advanced Concepts
Structures Design Engineer - Advanced Concepts

BETA Technologies, Inc. • South Burlington (VT)

Hybrid
USD 105,000 - 125,000
Restricted Stock Units and Performance
onsite healthcare in Vermont
comprehensive medical coverage
+6
Computational Design Engineer – Advanced Concepts
Computational Design Engineer – Advanced Concepts

BETA Technologies, Inc. • South Burlington (VT)

Hybrid
USD 120,000 - 140,000
RSUs
PSUs
Healthcare
+5
Structures Design Engineer, Advanced Concepts
Structures Design Engineer, Advanced Concepts

BETA Technologies, Inc. • United States

Hybrid
USD 105,000 - 125,000
RSUs/PSUs
Healthcare in Vermont
Dental & Vision
+4
Systems Integration Engineer, Advanced Concepts
Systems Integration Engineer, Advanced Concepts

BETA Technologies, Inc. • United States

Hybrid
USD 105,000 - 125,000
Restricted Stock Units
Performance Stock Units
Onsite healthcare in Vermont
+2
Aircraft Development Engineer, Advanced Concepts
Aircraft Development Engineer, Advanced Concepts

BETA Technologies, Inc. • United States

Hybrid
USD 130,000 - 150,000
Stock options
Healthcare
Lunch provided
+2
Aircraft Industrial Design Engineer, Advanced Concepts
Aircraft Industrial Design Engineer, Advanced Concepts

BETA Technologies, Inc. • United States

Hybrid
USD 130,000 - 150,000
RSUs
PSUs
Onsite healthcare in US
+1
Senior Structures Design Engineer, Advanced Concepts
Senior Structures Design Engineer, Advanced Concepts

BETA Technologies, Inc. • United States

Hybrid
USD 150,000 - 180,000
RSUs
PSUs