McWane Ductile Ohio - Poles PLC Technician

McWane, Inc.

Coshocton (OH)

On-site

USD 30,000 - 47,000

Full time

2 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

McWane, Inc. is seeking an on-site Electrical Controls Technician in Coshocton, OH. The role focuses on troubleshooting and maintaining PLC-based control systems, installing PLC hardware, and supporting electricians and maintenance staff.

AAs in Electrical Engineering Technology or Mechatronics plus experience are required, with familiarity in Studio 5000, RS Logix, and FactoryTalk View. You will work in a team environment, handling various electrical and control tasks, adhering to NFPA 70E

Qualifications

  • PLC logic and programming experience, AB and Siemens platforms.
  • AA in Electrical Engineering Technology or Mechatronics, plus 2+ years in industrial manufacturing.
  • Strong understanding of NFPA 70E and electrical schematics.

Responsibilities

  • Troubleshoot equipment using PLC programs to support plant electricians.
  • Install Programmable Logic Controllers on new and existing equipment.
  • Read and interpret electrical schematics and diagrams.
  • Coordinate with engineering and maintenance on control system modifications.
  • Maintain records and back up programming files.

Skills

PLC Programming
Allen-Bradley
Siemens
Electrical Troubleshooting

Education

AA in Electrical Engineering Technology
Mechatronics Technology

Tools

Studio 5000
RS Logix 500/5000
FactoryTalk View ME/SE

Job description

  • Full-time
  • Exempt/Non-Exempt: Non-Exempt
Company Description

McWane is an equal employment opportunity employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, disability, veteran or service member status, marital status, citizenship status or any other category protected by federal, state, or local law.

Physical Demands: The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is usually required to sit. The employee is occasionally required to stand, walk, reach with hands and arms, climb or balance and stoop, kneel, crouch. The employee must frequently lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, color vision and peripheral vision. The work environment characteristics described are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles and outside weather conditions. The noise level in the work environment is usually moderate.,

Job Description

Essential Duties and Responsibilities: include those listed below, other duties may be assigned. This position is a full time (minimum 40 hours per week) on-site position.

  • Ability to troubleshoot equipment using PLC programs to support plant Electricians.
  • Install Programmable Logic Controllers on new and existing equipment
  • Good understanding of NFPA 70E and basic wiring techniques
  • Experience with drives, motors, and motor controls
  • Possess a good understanding of sensors
  • Possess a basic understanding of pneumatics – cylinders, valves, solenoids, etc.
  • Have a good understanding ladder logic program
  • Ability to read and understand electrical schematics
  • Documenting work and maintaining records. Back-up copies of programs and parameter sets for the plant.
  • Assisting in the training of staff
  • Monitoring work and systems to ensure compliance with Federal, State, and County codes, regulations, standards, and mandates
  • Create and read logic and flow diagrams for program design, programming, simulation and testing, and start-up
  • Program and Troubleshoot Allen Bradley control systems hardware and software (Studio 5000, RS Logix 500/5000, Factory talk View ME/SE).
  • Interpreting project documentation to develop an understanding of the process control requirement.
  • Coordinate with engineering and maintenance on existing machine control modifications to robotic, electrical, electronic, hydraulic, and pneumatic and vision systems. Retrofits to upgrade from SLC-era control systems for risk reduction are a possibility.
  • Increase uptime, throughput, efficiency, and quality, through the process of maintaining, designing, developing and continuously improving our equipment and the utilization of technology to ensure the best quality products are produced.
  • Perform continuous improvement activities to improve safety, to increase productivity and to reduce production cost, by development and improvement of electrical control systems, PLC, HMI & robotics programming, including design, implementation, and troubleshooting.
  • Assisting in developing of PM strategies and identify areas of improvement within the control system infrastructure.
  • Participation in design reviews for new machinery to provide input into control system capabilities which affect machine function. Must be able to work closely with CAD designer/engineering to integrate/package/select appropriate electromechanical presses and servo motors to meet design requirements.
  • Provide training and guidance to maintenance personnel related to controls systems.
  • Train employees on electrical and mechanical troubleshooting of existing equipment.
  • Scheduled plant coverage rotation required to remotely log in and troubleshoot machine issues, or, if required, be on site to assist with troubleshooting.
  • Resolve customer questions and/or concerns without seeking assistance from leadership.
  • Assist in identifying and procuring equipment and parts necessary for daily maintenance requirements.
  • Proficient troubleshooting, including electrical/electronic systems (+/- 10V, 24V, 120V)
  • Proactive individual that takes responsibility for their equipment.
  • Work in a team environment where honest communication, a positive attitude, engagement, and personal accountability are expected.
  • Work off-shifts, weekends, and extended shifts (i.e., 12 hrs.). This position may require off-shift support for production or start up.

Supervisory Responsibilities: None.

Qualifications

Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Education and/or Experience: Must be experienced in PLC logic and programming with any of the following PLC’s: Allen Bradly, Siemens. AA in Electrical Engineering Technology or Mechatronics Technology preferred plus 2 years’ related experience in an industrial manufacturing setting; OR an equivalent combination of related education and/or experience. Certification of AB training courses a plus

Computer Skills: Computer literate; proficient with Microsoft Windows, MS Office programs and applications for word processing, email, database management and spreadsheets.

Reasoning Ability: Ability to look at electrical blueprints, review them to identify issues and ensure they will work before being installed. Must apply common sense and solve practical problems. Ability to look at electrical grids and evaluate them for any problems, isolate the issue, and solve it, to make sure they are being installed correctly. Ability to identify issues and make corrective measures to fix problems with electrical components. Electrical technicians need to be able to look for problems in complicated electrical grids, isolate the issue and solve it.

Additional Information

All your information will be kept confidential according to EEO guidelines.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.
McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

McWane Ductile Ohio - Poles PLC Technician
McWane Ductile Ohio - Poles PLC Technician

McWane • Coshocton (OH)

On-site
USD 55,000 - 80,000
McWane Ductile Ohio - Poles PLC Technician
McWane Ductile Ohio - Poles PLC Technician

McWane Ductile • Coshocton (OH)

On-site
USD 65,000 - 98,000
McWane Ductile Ohio - Process Control Tech (PLC Technician)
McWane Ductile Ohio - Process Control Tech (PLC Technician)

McWane • Coshocton (OH)

On-site
USD 65,000 - 90,000
Process Control Tech (PLC Technician)
Process Control Tech (PLC Technician)

Coshoctonchamber • Coshocton (OH)

On-site
USD 50,000 - 65,000
Equal opportunity employer
Encouragement of female and minority candidates
McWane Ductile Ohio - Poles Electrical Control Technician (ELC Tech)
McWane Ductile Ohio - Poles Electrical Control Technician (ELC Tech)

McWane • Coshocton (OH)

On-site
USD 55,000 - 75,000
McWane Ductile Ohio - Poles Electrical Control Technician (ELC Tech)
McWane Ductile Ohio - Poles Electrical Control Technician (ELC Tech)

McWane, Inc. • Coshocton (OH)

On-site
USD 55,000 - 75,000
McWane Ductile Ohio Process Control Tech PLC Technician
McWane Ductile Ohio Process Control Tech PLC Technician

McWane Ductile • Coshocton (OH)

On-site
USD 50,000 - 70,000
McWane Ductile Ohio - Poles Electrical Control Technician (ELC Tech)
McWane Ductile Ohio - Poles Electrical Control Technician (ELC Tech)

McWane Ductile • Coshocton (OH)

On-site
USD 60,000 - 90,000
McWane Ductile Ohio - Electrician B - Poles
McWane Ductile Ohio - Electrician B - Poles

McWane • Coshocton (OH)

On-site
USD 55,000 - 75,000
McWane Ductile Ohio - Electrical Control Technician (ELC Tech)
McWane Ductile Ohio - Electrical Control Technician (ELC Tech)

McWane • Coshocton (OH)

On-site
USD 65,000 - 90,000