Master Electrician - 1st Shift

Oshkosh AeroTech

Dodge Center (MN)

On-site

USD 55,000 - 69,000

Full time

13 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Job summary

McNeilus Truck and Manufacturing Inc. seeks a Master Electrician to lead installation, start-up, and shut-down of equipment, and to troubleshoot and repair electrical systems in our manufacturing environment.

You will apply knowledge of electrical codes, write specifications, and mentor apprentices while maintaining safety and quality standards.

Qualifications

  • High School Diploma or GED is required.
  • Three or more years of proven experience in electrical/electronics, mechanical, hydraulic, and pneumatic fields.
  • Electrical Journeyman license (MN) and Master Electrician license (MN) are required or preferred.
  • Strong safety mindset and ability to work with diverse teams.

Responsibilities

  • Install, start up, and shut down equipment in accordance with safety procedures and OSHA requirements.
  • Troubleshoot and repair electrical/electronic equipment.
  • Plan electrical work with knowledge of codes, materials, and operating principles.
  • Advise operators and maintenance on safe operation procedures and requirements.
  • Inform management of potential electrical/mechanical plans and hazards.
  • Assist and train apprentices and technicians.
  • Perform preventative maintenance as needed.
  • Maintain required performance and maintenance records.

Skills

Electrical/Electronics
Mechanical
Hydraulic/Pneumatic

Education

High School Diploma or GED
Electrical Journeyman license
Master Electrician license

Job description

About McNeilus, an Oshkosh Company

McNeilus Truck and Manufacturing Inc. is committed to serving everyday heroes and is an industry leading designer and manufacturer of refuse truck bodies. McNeilus produces a complete line of high-performance rear load, front load, and automated side load refuse bodies to augment any refuse collection fleet. Our team members are critical in our mission of supporting waste warriors and keeping communities safe and clean.

JOB SUMMARY

The Master Electrician is responsible for installation, start up, and shut down of equipment; troubleshoot and repair of electrical equipment. This role will require a thorough knowledge of electrical and mechanical theories and principles, writing specifications, local and national electrical codes, properties of carious materials, principles of operation and application of electrical equipment.

Pay Range: $40 - $50.25

YOUR IMPACT
  • Install, start up, and shut down equipment in accordance with company safety procedures in line with OSHA requirements.
  • Troubleshoot and repair electrical/electronic equipment.
  • Plan electrical work utilizing thorough background knowledge of electrical/electronic and machinal theories and principles, local and national electrical codes, and properties of various materials.
  • Advise operators and maintenance technicians of operation procedures and requirements for working safely with electric/electronic and machinal equipment components.
  • Inform appropriate management and maintenance of potential electrical/mechanical plans and inherent dangers involved.
  • Assist and train apprentices and technical team members.
  • Perform preventative maintenance functions as needed.
  • Maintains company required performance and maintenance records for identified equipment.
MINIMUM QUALIFICATIONS
  • High School Diploma or GED.
  • Three (3) or more years of proven experience in the electrical/electronics, mechanical, hydraulic, and pneumatic fields, and the ability to demonstrate high proficiency in these areas.
  • Electrical Journeyman license, MN. Board of Electricity.
  • Master Electrician license, MN. Board of Electricity.
STANDOUT QUALIFICATIONS
  • A thorough knowledge in all areas of industrial electricity, electrical/electronic components and equipment including the use of special instruments for diagnostic purposes.
  • Must be able to work well with all levels of personnel, individually or in a team environment.
  • Must be able to interfere and communicate with operators in order to assist with repairs and troubleshooting.
  • Computer experience and Programmable Logic Controller (PLC) programming.
  • Ability to climb in overhead structures to work beneath machines and in close quarters performing analysis and repair work.
  • Must be highly safety conscious applying all company rules and regulations.
CORE COMPETENCIES
  • Internal Contacts: Contact with peers and others involving explanation of information (these contacts may be within or outside department or division), and the gathering of factual information; may include the communication of sensitive or confidential information.
  • External Contacts: Limited external contact to: gather information, answer queries, or ask assistance.
  • Communication Skills: Read, write and comprehend simple instructions, short correspondence and memos. Read and interpret safety rules, operating/maintenance instructions and procedure manuals. Read, analyze and interpret business manuals, technical procedures and/or government regulations.
  • Decision-Making: Requires minimal decision-making responsibility.
  • Complexity, Judgment and Problem Solving: Generally diversified and moderately difficult work. Requires judgement in the adaptation and interpretation of established practices and procedures to meet problems and situations to which the application is not clearly defined.
WORKING CONDITIONS
  • Physical Demands: Frequent: Standing, Walking/Running, Sitting, Reaching, Hearing, Talking, Visual, Typing; Occasional: Climbing, Driving, Bending/Kneeling, Hearing, Talking, Visual, Typing, Fine Dexterity, Manual Dexterity; Upper Extremity Repetitive Motion, Lifting/Carrying 25lbs., Pushing/Pulling 25llbs.
  • Non-Physical Demands: Occasional: Analysis/Reasoning, Communication/Interpretation, Math/Mental Computation, Reading, Sustained Mental Activity (i.e. auditing, problem solving, grant writing, composing reports), Writing.
  • Environmental Demands: Occasional: Work Alone, Frequent Task Changes, Tedious/Exacting Work, Dust, Temperature Extremes, Loud Noises.
  • Work Schedule: Routine shift hours. Infrequent overtime, weekend, or shift rotation.
  • Demands/Deadlines: Occasional stress due to deadlines or workload because of intermittent or cyclical work pressures, or occasional exposure to distressed individuals within the immediate work environment.

If you need a

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Master Electrician - 1st Shift
Master Electrician - 1st Shift

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
USD 55,000 - 69,000
Master Electrician - 1st Shift
Master Electrician - 1st Shift

McNeilus Truck & Mfg Inc • Dodge Center (MN)

On-site
USD 55,000 - 69,000
Maintenance Technician I - 1st Shift
Maintenance Technician I - 1st Shift

Oshkosh Corp. • Dodge Center (MN)

On-site
USD 28,000 - 39,000
Automation Technician - Mechatronics/Robotics - 1st Shift
Automation Technician - Mechatronics/Robotics - 1st Shift

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
USD 30,307 - 42,981
Industrial Maintenance Technician - 2nd shift - $1,000 Sign On Bonus
Industrial Maintenance Technician - 2nd shift - $1,000 Sign On Bonus

JLG Industries Inc • Iowa

On-site
USD 28,000 - 40,000
Industrial Maintenance Technician - 2nd shift
Industrial Maintenance Technician - 2nd shift

McNeilus Truck and Manufacturing, Inc. • Riceville (IA)

On-site
USD 27,552 - 39,041
Industrial Maintenance Technician - 2nd shift
Industrial Maintenance Technician - 2nd shift

Oshkosh Corp. • Riceville (IA)

On-site
USD 28,000 - 40,000
Heavy-Duty Vehicle Assembler II
Heavy-Duty Vehicle Assembler II

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
USD 29,000 - 37,000
Heavy Duty Truck Assembler, 1st Shift
Heavy Duty Truck Assembler, 1st Shift

McNeilus Truck and Manufacturing, Inc. • Dodge Center (MN)

On-site
USD 28,000 - 36,000
Health benefits on Day 1
Tuition reimbursement up to $10k/yr
401k with company match
+2
Automation Technician - Mechatronics/Robotics - 1st Shift
Automation Technician - Mechatronics/Robotics - 1st Shift

Oshkosh Corporation, Inc. • Dodge Center (MN)

On-site
USD 30,000 - 43,000