Manufacturing Welder 3 - Night Shift

Holt Texas, Ltd.; Kilgore (TX); On-site; USD 47,000 - 66,000; Full time

Job summary

Holt Texas, Ltd. is seeking a skilled MFG Welder 3 to perform moderate welding fabrications and interpret drawings and welding symbols.

The role supports both independent and team-based production within the Machine Division, demanding adherence to procedures and quality standards.

Qualifications

• Minimum four years of welding experience; six or more years preferred.
• Multiple welding certifications in FCAW and GMAW welding processes in the 1-4 G/F positions.
• Ability to read, interpret blueprints and welding symbols.
• Proficiency with hand and power tools used in fabrication and welding.
• Commitment to safety policies and PPE requirements.

Responsibilities

• Model and promote Holt Values Based Leadership (VBL) and align with Vision, Values, and Mission.
• Fabricate sub-assemblies and full products per drawings and welding symbols.
• Develop new fabrication weldment procedures in coordination with standard work.
• Participate in process improvement initiatives to enhance safety and quality.
• Interpret blueprints and welding symbols and perform welding accordingly.
• Inspect welds and ensure compliance with codes and quality standards.
• Mentor and coach other welders; maintain equipment and work area.
• Follow standard work and 5S; operate overhead cranes and material transport safely.

Skills

Welding

Fabrication

Blueprints/Drawings

Safety Compliance

Teamwork

Problem Solving

Education

High school diploma or equivalent

Tools

Welding Equipment FCAW/GMAW

MS Office / Holt OS

Job description

Description

Job Summary: This position is responsible for performing moderate manufacturing weld fabrications of various products and components. The MFG Welder 3 demonstrates proficiency as a welder and fabricator in the following of established procedures and guidelines; understanding drawings and blueprints, adhere to the standard procedures in the use of equipment when engaging in any fabrication processes. Able to work independently or as a member of a team to provide fabrication services that satisfy customer needs and achieve departmental goals.

Department

Machine Division (MAC)

Employment Type

Full Time

Location

Kilgore

Description

Job Summary: This position is responsible for performing moderate manufacturing weld fabrications of various products and components. The MFG Welder 3 demonstrates proficiency as a welder and fabricator in the following of established procedures and guidelines; understanding drawings and blueprints, adhere to the standard procedures in the use of equipment when engaging in any fabrication processes. Able to work independently or as a member of a team to provide fabrication services that satisfy customer needs and achieve departmental goals. Mid-level position – Generally has a minimum of four years of experience and/or demonstrated job relevant knowledge/skills and has obtained welding certifications in the FCAW and GMAW welding processes (1-4 G/F). The MFG Welder 3 has moderate knowledge of standard and technical concepts, practices, and procedures; performs a variety of standard, complex, and technical tasks; is indirectly supervised and self-starting; and a team member of product production workflow. The incumbent in this position is expected to model the following practices on a daily basis: 1) Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development.

Essential Functions

• Models, promotes, reinforces, and rewards the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission
• Performs in accordance to guidelines and procedures with proper setup and fabrication of sub-assemblies and full product utilizing various tools and fixtures
• Assists with developing new fabrication weldment procedures utilizing drawings, blueprints, and welding symbols in coordination with current standard work
• Participates in Rapid Improvement Workshops (RIWs) and Kiazen events to continuously improve processes, safety, and quality
• Performs skills to interpret blueprints, drawings, and all welding processes through weld symbols and call outs
• Performs basic skills to complete work orders, fabrication, and welding on product and their components
• Ensures all weldments are in compliance with specific welding codes, procedures, and quality standards
• Performs moderate oxy/acetylene torch and plasma cutting, and welding of multiple different welding processes
• Performs and completes tasks with minimal supervision
• Assists with coaching and mentoring other MFG Welders
• Updates job knowledge by participating in educational opportunities; (e.g., ProTech Welder Training Paths)
• Performs processes as outlined in Standard Work to develop and maintain consistency between shifts and areas
• Transports material in area or between areas utilizing overhead crane, jibs, carts, magnets and other devices
• Works as a member of the manufacturing team to provide high quality products that satisfy the customer (internal and external) and achieves manufacturing goals
• Maintains the performance of equipment and work area through regular operator checks and maintenance resulting in operational equipment and work areas in good, clean, and orderly condition (Operator Performed Maintenance – OPM, and 5S)
• Works safely at all times and adheres to all applicable safety policies; complies with all company policies, procedures, and standards
• Adheres to contamination control and HAZMAT rules and regulations
• Performs training and development of new and existing team members
• Performs quality inspections, complete reports, documents, and/or any other necessary paperwork, and enforces required rework prior to customer
• Works overtime as required by workload and customers’ needs
• Requires regular and punctual employee attendance
• Performs other duties as assigned

Knowledge, Skills, And Abilities

• Demonstrated knowledge of weld equipment and dimensional tools, including their uses, and maintenance
• Demonstrated knowledge of specification and drawing interpretations; e.g. drawings, blueprints and computers and use of equipment needed to fabricate and perform the tasks at hand
• Demonstrated knowledge and experience with welding symbols, construction math
• Demonstrated knowledge with current computer software, related hardware and machine electronic systems
• Demonstrates proficiency skill with a cutting torch, layout and fit up tools, blueprints, drawings, and defined welding processes
• The ability to demonstrate technical skills as a skilled welder and fabricator to effectively perform assigned welding tasks
• Adaptable to changing schedules and exhibits time management skills
• Ability to follow logical troubleshooting and standard operating procedures when performing welding processes
• Ability to develop thinking and problem solving skills to learn and understand Root Cause Corrective Action (RCCA) process
• Ability to work independently and as part of a team with a strong work ethic being dependable, reliable and honest with demonstrated integrity
• Ability to read, write, and understand information
• Ability to follow standard work to ensure quality work
• Ability to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding
• Required PC skills to use MS Office and Holt Operating System (DBS, SIS, Epicor)

Must Complete Value Based Leadership Training To Include

• Principles of Persuasion (POP)
• DiSC II – Behaviors and Motivators

Requirements

Education and Experience

• High school diploma or equivalent preferred
• A minimum of four years’ of work-related skill, knowledge, or experience required; six or more years preferred
• Multiple Welding Certifications required in the FCAW and GMAW welding processes in the 1-4 G/F positions

Supervisory Responsibilities

• None

Travel

• Valid Driver’s license required

Physical Requirements

• Significant amount of time standing, walking, kneeling, crouching, stooping, climbing, and reaching
• Constant movement and use of limbs, hands, this position requires good manual dexterity, coordination, and stamina
• Ascends/descends with gradual or continuous progress by oneself, using both hands and feet and climbs up and down ladders and/or equipment
• Routinely reacts to visual, auditory, and other signals including alarms and instructions, and is required to visually inspect work
• Be able to maneuver safely and work underneath equipment
• Frequently lifts and moves materials and equipment up to 50 lb.
• Must be able to move objects, and use abdominal and lower back muscles to provide support over time without fatigue
• May be required to work in confined work spaces, awkward positions and high places

Work Environment

• Requires wearing proper protective and safety equipment (PPE)
• Regularly works indoors around moving equipment and exposed to flashes of light from welding, and loud noise levels; may be exposed to weather extremes when working outside in conditions that include inclement weather, heat, cold, and humidity
• Exposure to small quantities of chemicals, dust, steam, high-pressure water and high speed rotating equipment
• Required to perform work in cramped spaces and/or on elevated surfaces
• Possible exposure to minor burns and cuts – must be reported for proper treatment

Disclaimer

Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed.

#HOLTWB