Manufacturing Test Engineer, Electrical/Mechanical

Anduril Industries; Rhode Island; On-site; USD 132,000 - 175,000; Full time

Job summary

Anduril Industries is hiring a Manufacturing Test Engineer to lead full-vehicle FAT (dry and wet) on the Dive-XL program at the Quonset Point, RI campus. You will troubleshoot electromechanical systems, own test plans, and drive DFx feedback to the design team.

Responsibilities include setting up new test processes, leading technicians, and traveling to the Sydney team as needed to align test procedures across sites. A US Secret clearance eligibility is required.

Qualifications

• Bachelor's degree in mechanical, electromechanical, electrical or computer engineering, or related field, or equivalent experience
• 3+ years of relevant experience, ideally designing tests for electromechanical hardware in a manufacturing environment
• Hardware testing and automated test systems
• Bench equipment such as oscilloscopes, DMMs and programmable power supplies
• Manufacturing test limits and the common failure modes that manufacturing introduces
• Running programmed scripts in Python, MATLAB, shell or similar
• Communication protocols such as USB, Ethernet, RS‑232, RS‑485, PCIe, HDMI and CAN
• Complex electromechanical systems, and what it takes to make them work reliably
• Full system test plans you wrote and ran on fast product development timelines
• Programming and testing a wide range of sensors, actuators and electrical components
• A test you owned from prototype to execution, from the setup through the hardware and software, that you can walk us through in detail
• Eligible to obtain and maintain an active U.S. Secret security clearance

Responsibilities

• Run full-vehicle dry FAT and wet FAT in our test tank as test conductor, working with technicians on the floor
• Become the subject‑matter expert on the vehicle's mechanical and electromechanical checks
• Own the in‑water checks in wet FAT and confirm each vehicle is ready for delivery to the customer
• Own what gets tested and where: decide which tests add value and which repeat earlier checks
• Push tests upstream so problems are caught early and give DFt feedback
• Triage every failed test step and route to the right owner
• Troubleshoot vehicle‑level failures hands‑on and drive root cause analysis
• Design and maintain the test equipment, rigs and fixtures used in dry and wet FAT
• Keep FAT procedures matched to the as-built vehicle and train technicians
• Write troubleshooting runbooks with symptoms and fixes
• Use Python and AI coding tools to automate test sequences and build dashboards
• Travel to Sydney to coordinate with the offshore team

Skills

Hardware testing

Automated test systems

Python scripting

MATLAB

Shell scripting

Communication protocols

Test ownership

Root cause analysis

Education

Bachelor's degree in mechanical/electromechanical/electrical/computer engineering or related field

Tools

Oscilloscopes

DMMs

Programmable power supplies

Jama

PLM / MES systems

Job description

Anduril Industries is a defense technology company with a mission to transform U.S. and allied military capabilities with advanced technology. By bringing the expertise, technology, and business model of the 21st century’s most innovative companies to the defense industry, Anduril is changing how military systems are designed, built and sold. Anduril’s family of systems is powered by Lattice OS, an AI-powered operating system that turns thousands of data streams into a realtime, 3D command and control center. As the world enters an era of strategic competition, Anduril is committed to bringing cutting-edge autonomy, AI, computer vision, sensor fusion, and networking technology to the military in months, not years.

About The Team

Dive-XL is Anduril's extra-large autonomous underwater vehicle (AUV), built for ultra-long range and large modular payloads. It is the vehicle behind Ghost Shark, which we build in Sydney for the Royal Australian Navy.

We are now setting up the first U.S. Dive-XL production line at our 150,000 square foot campus in Quonset Point, Rhode Island. Designs and manufacturing BOMs live in Siemens NX and Teamcenter. Routings and digital work instructions live in ArsenalOS, our in-house MES, and materials and orders run through Oracle ERP.

About The Role

This is a manufacturing test engineering role focused on full-vehicle testing. You will run Dive-XL through dry factory acceptance testing (FAT) on the floor and wet FAT in our onsite test tank, and troubleshoot what those tests find. You will lead on the electromechanical side, working with engineering and the technicians who run the tests.

If you are tired of legacy bureaucracy, you will feel the difference here from day one. The line is new, so you will set up its processes from the start, with the autonomy to help make Quonset a world-class production site.

You do not need subsea experience. We are looking for strong hands-on test and troubleshooting experience with electromechanical systems, and we will teach you the vehicle.

Based on eligibility, relocation assistance may be available.

What You’ll Do

• Run full-vehicle dry FAT and wet FAT in our test tank as test conductor, working through each procedure with the technicians on the floor
• Become the subject‑matter expert on the vehicle's mechanical and electromechanical checks, such as the body structure, cabling, control surfaces, propulsion, and the anchor and emergency release systems
• Own the in‑water checks in wet FAT and confirm each vehicle is ready for delivery to the customer
• Own what gets tested and where: decide which tests add value and which repeat earlier checks, and cut test time while still proving the product requirements
• Push tests upstream so problems are caught at the smallest assembly possible instead of at FAT, and give the product definition team design‑for‑test (DFT) feedback
• Triage every failed test step as a real defect, a procedure that no longer matches the as-built vehicle, a test‑setup limit or a missing upstream step, and send it to the right owner
• Troubleshoot vehicle‑level failures hands‑on, lead data‑driven root cause using structured problem solving, and get the fix back to the line
• Design and maintain the test equipment, rigs and fixtures used in dry and wet FAT
• Keep FAT procedures matched to the as-built vehicle as the design changes, and train technicians to run them
• Write troubleshooting runbooks with the symptoms, diagnostic steps and fix, so the next technician clears the same failure faster
• Use Python and AI coding tools to automate test sequences, parse test logs, and build dashboards that track pass/fail trends and first-pass yield across the line
• Work with our Sydney test team so both sites run the same tests, and travel to Sydney when the work calls for it

Required Qualifications

• Bachelor's degree in mechanical, electromechanical, electrical or computer engineering, or a related field, or equivalent experience
• 3+ years of relevant experience, ideally designing tests for electromechanical hardware in a manufacturing environment
• Hardware testing and automated test systems
• Bench equipment such as oscilloscopes, DMMs and programmable power supplies
• Manufacturing test limits and the common failure modes that manufacturing introduces
• Running programmed scripts in Python, MATLAB, shell or similar
• Communication protocols such as USB, Ethernet, RS‑232, RS‑485, PCIe, HDMI and CAN
• Complex electromechanical systems, and what it takes to make them work reliably
• Full system test plans you wrote and ran on fast product development timelines
• Programming and testing a wide range of sensors, actuators and electrical components
• A test you owned from prototype to execution, from the setup through the hardware and software, that you can walk us through in detail
• Eligible to obtain and maintain an active U.S. Secret security clearance

Preferred Qualifications

• Subsea robotics or AUV/UUV experience, including in‑water testing
• PLM, MES, Jama and test execution systems
• Testing and working around high‑voltage systems up to 400 V
• Projects that integrate electrical, mechanical and software or firmware systems
• Owning projects with loose scope under technical and schedule pressure

US Hourly Range

$132,000—$175,000 USD

Benefits

The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary offer may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full time offers; and are considered part of Anduril's total compensation package. Additionally, Anduril offers top‑tier benefits for full‑time employees, including:

At Anduril, we invest in our people. Our comprehensive, competitive benefits package (available at little to no cost to employees) ensures you’re supported in health, recovery, and whatever comes next. For more information, Explore Our Benefits.

Data Privacy

To view Anduril's candidate data privacy policy, please visit https://anduril.com/applicant-privacy-notice/.

By submitting your application, you consent to Anduril Industries using a third‑party service provider to conduct pre‑employment risk, integrity, and due diligence screening and assessing potential risks as part of your application process. This third‑party service provider provides risk‑intelligence services that may include analysis of sanctions and watchlists, adverse media, public‑record information, and other lawful open‑source or commercial data sources. This third‑party service provider does not act as a consumer reporting agency. Use of this provider helps to ensure compliance with applicable laws and protect technology, intellectual property, and organizational security.