Manufacturing Quality Engineer BotQ

Figure; San Jose (CA); Sur place; USD 150 000 - 250 000; Plein temps

Résumé du poste

Figure is an AI robotics company developing autonomous general-purpose humanoid robots, headquartered in San Jose, CA. This on-site senior-quality role leads quality on in-house assembly lines, drives PFMEAs, control plans, and SPC implementations to scale production of next-gen humanoid systems.

The role requires 7+ years of quality engineering in high-volume electromechanical manufacturing, a relevant engineering degree, and hands-on experience with PFMEAs, control plans, and data-driven

Qualifications

• 7+ years of quality engineering experience in high-volume electromechanical manufacturing.
• Hands-on PFMEA and control plans from NPI into production.
• Structured problem-solving using 8D, 5-Why, and fishbone analysis.

Responsabilités

• Own quality on assigned in-house assembly lines (battery pack and final robot assembly).
• Define control plans, in-process and end-of-line quality checks; drive automated inspection and data capture by mass production.
• Monitor first-pass yield and defect Pareto; lead daily quality response on the line.
• Lead line audits covering process, tooling, gauges, data recording, and operator training.
• Act as the quality voice on next-gen robot builds; maintain PFMEAs and control plans ahead of each build phase.
• Translate DFMEA severity into process controls and feed design gaps back to design teams.

Connaissances

Quality engineering

PFMEA

Control plans

SPC

GD&T

Statistical analysis

Robotic systems

Formation

Bachelor's degree in Mechanical, Electrical, Manufacturing, Mechatronics Engineering, or related field

Outils

JMP

Minitab

CMM

Vision systems

Description du poste

Figure is an AI robotics company developing autonomous general-purpose humanoid robots. The goal of the company is to ship humanoid robots with human level intelligence. Its robots are engineered to perform a variety of tasks in the home and commercial markets. Figure is headquartered in San Jose, CA.

Responsibilities

• Own quality on assigned in-house assembly lines, such as battery pack assembly and final robot assembly.
• Define control plans, in-process and end-of-line quality checks, and drive them toward automated inspection and data capture by the start of mass production.
• Monitor first-pass yield and defect Paretos, apply SPC where it adds control, and lead the daily quality response on the line.
• Lead manufacturing line audits covering process, specifications, tooling and gauges, data recording, and operator training.

New product introduction

• Act as the quality voice on next-generation robot builds: review process flows with Manufacturing Engineering, and author and maintain PFMEAs and control plans ahead of each build phase.
• Translate DFMEA severity and safety-critical classifications into process controls, and feed design gaps back to the design teams.
• Define quality line-readiness criteria and sign off readiness for prototype builds through start of production.

Field failures and remanufacturing

• Own failure analysis on field returns and remanufactured units: structured failure coding, teardown, and root cause using 8D, 5-Why, and fishbone analysis.
• Close the loop from field data to production and design corrective actions.
• Drive the DOA and return resolution process together with the remanufacturing and commercial teams.

Quality system and team

• Contribute to building out the manufacturing quality management system: internal audit, corrective and preventive action, deviation handling, equipment qualification, and training standards.
• Partner with Supplier Quality on incoming inspection and supplier corrective actions for components used on the lines.
• Mentor quality engineers and technicians, and raise the standard of structured problem solving across Production, Manufacturing, and Quality.

Requirements

• 7+ years of experience in quality engineering in high-volume electromechanical manufacturing (automotive, consumer electronics, robotics, or similar).
• Bachelor's degree in Mechanical, Electrical, Manufacturing, Mechatronics Engineering, or a related technical field.
• Hands-on experience authoring PFMEAs and control plans and carrying them from NPI into production.
• Structured problem-solving experience with 8D, 5-Why, fishbone analysis, and formal corrective action processes.
• GD&T knowledge and the ability to interpret complex technical drawings.
• Statistical analysis and SPC using tools such as JMP or Minitab, and the ability to build dashboards from inspection and test data.
• Experience with robotic systems, automation, or complex electromechanical assemblies.
• Track record of working on the production floor directly with operators, manufacturing engineering, and design teams.

Bonus Qualifications

• Battery pack, actuator, or drivetrain assembly experience.
• Field failure analysis, warranty, or remanufacturing quality experience.
• Knowledge of ISO 9001 or IATF 16949 standards.
• Six Sigma Green Belt or Black Belt certification.
• Hands-on experience with automated inspection systems (CMM, vision systems).
• Experience building a quality management system from the ground up.
• CATIA V6 experience.

The US base salary range for this full-time position is $150,000 to $250,000 per year.

The pay offered for this position may vary based on several individual factors, including job-related knowledge, skills, and experience. The total compensation package may also include additional components/benefits depending on the specific role. This information will be shared if an employment offer is extended.