Manufacturing Engineering Manager

MedTeam Staffing Inc.

Anderson (SC)

On-site

USD 150,000 - 180,000

Full time

11 days ago

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Bonus
Generous paid time off
401(k) retirement plan match
Health insurance

Job summary

MedTeam Staffing Inc. is recruiting an experienced Manufacturing Engineering Manager for its Anderson, SC facility.

You will lead Manufacturing Engineering, Process Engineering, Tooling, Automation, New Product Introduction, and Continuous Improvement to develop and optimize manufacturing processes and tooling. You will drive capital projects, improve equipment performance, and implement advanced manufacturing technologies while ensuring safety and compliance with automotive standards.

Qualifications

  • Bachelor's degree in a technical discipline is preferred.
  • Seven+ years of progressive manufacturing engineering experience.
  • Experience in plastics manufacturing (blow-molding/injection-molding).
  • Experience leading manufacturing engineering teams and capital projects.
  • Strong knowledge of Lean, Six Sigma, Kaizen.
  • Familiarity with automotive quality systems (IATF 16949, ISO 9001).
  • Experience with PFMEA, process control plans, and engineering change-management.

Responsibilities

  • Provide leadership across Manufacturing Engineering, Process Engineering, Tooling, Automation, and Continuous Improvement.
  • Lead development, implementation, and optimization of manufacturing processes, equipment, tooling, and production technologies.
  • Drive improvements focusing on productivity, cycle-time, scrap, quality, and equipment utilization.
  • Provide technical leadership in plastics manufacturing, especially blow-molding and injection-molding.
  • Lead the introduction of new products, processes, tooling, and equipment into full-scale production.
  • Identify and implement automation, robotics, and advanced process controls.
  • Develop and execute capital investment projects from specification to validation.
  • Collaborate to improve equipment reliability, tooling performance, and OEE.
  • Drive Lean Manufacturing, Six Sigma, Kaizen, and other CI initiatives.
  • Monitor KPIs: cycle times, scrap rates, process capability, productivity, and costs.
  • Lead root-cause analysis and problem solving for manufacturing issues.
  • Ensure compliance with automotive and manufacturing standards; support validation.
  • Develop SOPs, PFMEAs, and change-management processes.
  • Manage budgets, expenditure planning, and ROI on engineering initiatives.
  • Work cross-functionally with Production, Maintenance, Quality, Materials Management, EHS, and external suppliers.
  • Ensure safety, environmental, quality, and regulatory compliance (OSHA, EPA, ISO, IATF).
  • Coach and develop personnel, fostering technical excellence and accountability.
  • Collaborate with leadership on strategy aligned with growth plans.

Skills

Leadership
Manufacturing Eng
Plastics processing
Blow molding
Injection molding
Automation
Lean Six Sigma
Kaizen
OEE
Capital projects
Cross-functional
Safety & compliance

Education

Bachelor's degree in Mechanical/Manufacturing/Industrial Engineering

Job description

Our client is a forward-thinking global manufacturing company specializing in the design, development, and production of high-quality plastic components and assemblies for the automotive, industrial, and healthcare sectors. Through its commitment to innovation, sustainability, quality, and advanced manufacturing, the company supports leading global organizations in bringing the vehicles, equipment, and products of tomorrow to life.

The company continues to strengthen its operational, technical, and manufacturing capabilities through an ambitious growth strategy supported by significant capital investment, strategic acquisitions, and sustained organic growth. With an established international presence and extensive expertise in advanced blow-molding and injection-molding technologies, the organization is well positioned for continued expansion.

To support its next phase of development, the company is seeking an experienced Manufacturing Engineering Manager to lead and enhance its manufacturing engineering capabilities at its facility in Anderson, South Carolina.

In this role, you will provide technical leadership across Manufacturing Engineering, Process Engineering, Tooling, Automation, New Product Introduction, and Continuous Improvement. You will be responsible for developing and optimizing manufacturing processes, improving equipment and tooling performance, leading capital investment projects, and implementing advanced manufacturing technologies.

Working closely with Production, Maintenance, Quality, and senior operational leadership, you will play a critical role in improving manufacturing efficiency, reducing operating costs, supporting new product launches, and strengthening the organization's long-term technical and operational capabilities.

Responsibilities
  • Provide leadership and direction across Manufacturing Engineering, Process Engineering, Tooling, Automation, and Continuous Improvement activities.
  • Lead the development, implementation, and optimization of manufacturing processes, equipment, tooling, and production technologies across the facility.
  • Drive manufacturing process improvements focused on productivity, cycle-time reduction, scrap reduction, quality, equipment utilization, and overall manufacturing efficiency.
  • Provide technical expertise and engineering leadership within plastic manufacturing environments, particularly blow-molding and injection-molding operations.
  • Lead and support the introduction of new products, manufacturing processes, tooling, and equipment, ensuring successful implementation and transition into full-scale production.
  • Identify, evaluate, and implement opportunities for manufacturing automation, robotics, advanced process controls, and other technologies to improve operational performance.
  • Develop and execute capital investment projects, including equipment specification, supplier selection, procurement, installation, commissioning, and production validation.
  • Collaborate with Production and Maintenance teams to improve equipment reliability, tooling performance, machine availability, and Overall Equipment Effectiveness (OEE).
  • Drive Lean Manufacturing, Six Sigma, Kaizen, and other structured continuous improvement initiatives throughout the manufacturing operation.
  • Establish, monitor, and report on key engineering and manufacturing performance indicators, including cycle times, scrap rates, process capability, productivity, equipment efficiency, and manufacturing costs.
  • Lead root-cause analysis and structured problem-solving activities to resolve recurring manufacturing, equipment, tooling, and process-related issues.
  • Partner with Quality Engineering to develop robust manufacturing processes, support process validation, and ensure compliance with applicable automotive and manufacturing quality standards.
  • Support the development and implementation of manufacturing documentation, standard operating procedures, process control plans, PFMEAs, and engineering change-management processes.
  • Manage engineering budgets, capital expenditure planning, project timelines, and technical resources while ensuring effective cost control and return on investment.
  • Work cross-functionally with Production, Maintenance, Quality, Materials Management, Environmental Health and Safety, and external equipment suppliers, tooling manufacturers, and technical service providers.
  • Ensure engineering activities and manufacturing processes comply with applicable safety, environmental, quality, and regulatory requirements, including OSHA, EPA, ISO, and IATF standards.
  • Lead, coach, and develop manufacturing engineering personnel, fostering a culture of technical excellence, accountability, collaboration, innovation, and continuous improvement.
  • Collaborate with senior leadership to develop and execute manufacturing engineering strategies aligned with the organization's broader operational objectives, capital investment plans, and long-term growth strategy.
Requirements
  • Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, Industrial Engineering, Plastics Engineering, or a related technical discipline is preferred.
  • Seven or more years of progressive manufacturing engineering experience, including previous engineering leadership or management responsibilities.
  • Strong experience within plastics manufacturing, preferably involving blow-molding, injection-molding, and/or automotive plastic component manufacturing.
  • Previous engineering leadership experience within an automotive manufacturing environment is highly desirable.
  • Proven experience managing manufacturing engineering teams, technical projects, process improvements, and manufacturing technology implementation.
  • Strong technical knowledge of manufacturing processes, plastics processing equipment, tooling systems, automation, and industrial manufacturing technologies.
  • Demonstrated experience improving manufacturing efficiency, reducing cycle times, minimizing scrap, optimizing process capability, and increasing equipment utilization.
  • Experience leading capital investment projects, including equipment specification, procurement, installation, commissioning, and process validation.
  • Strong understanding of manufacturing automation, robotics, PLC-controlled equipment, and advanced manufacturing systems.
  • Demonstrated experience implementing Lean Manufacturing, Six Sigma, Kaizen, and other structured continuous improvement methodologies.
  • Strong knowledge of automotive and manufacturing quality-management systems, including IATF 16949 and ISO 9001.
  • Working knowledge of APQP, PPAP, PFMEA, process control plans, and structured engineering change-management processes.
  • Understanding of environmental and occupational health and safety standards, including ISO 14001, ISO 45001, and applicable OSHA and EPA requirements.
  • Experience working collaboratively with Production, Maintenance, Quality, Tooling, and other operational functions to resolve technical challenges and improve manufacturing performance.
  • Strong financial and commercial awareness, including experience managing engineering budgets, capital expenditure, project costs, and manufacturing cost-reduction initiatives.
  • Excellent leadership, communication, coaching, team-development, and project-management capabilities.
  • Demonstrated ability to manage competing priorities, lead cross-functional technical teams, and deliver measurable engineering and operational improvements within a fast-paced manufacturing environment.
Compensation and Benefits

Base Salary: $150,000–$180,000 per annum – Negotiable on Experience

Benefits: Bonus, Generous paid time off (20 days), comprehensive holiday calendar, family health insurance plan, a strong 401(k) matched retirement plan, and excellent opportunities for career growth and development.

Employment Type: Full-Time, Permanent

Location: Anderson, South Carolina

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Engineering Manager
Manufacturing Engineering Manager

Ashton North LLC • Anderson (SC)

On-site
USD 150,000 - 180,000
Bonus
Generous paid time off (20 days)
Comprehensive holiday calendar
+3
Manufacturing Engineering Manager
Manufacturing Engineering Manager

The Keystone Distinction Group • Anderson (SC)

On-site
USD 150,000 - 180,000
Bonus
Paid time off
401(k) plan
+1
Manufacturing Engineering Manager
Manufacturing Engineering Manager

Launching Point • Anderson (SC)

On-site
USD 150,000 - 180,000
Bonus
Generous paid time off (20 days)
family health insurance plan
+2
Manufacturing Engineering Manager
Manufacturing Engineering Manager

RON SUNSHINE ASSOCIATES LLC • Anderson (SC)

On-site
USD 150,000 - 180,000
Manufacturing Engineering Manager
Manufacturing Engineering Manager

Ridgemont Resources, Inc. • Anderson (SC)

On-site
USD 150,000 - 180,000
Bonus
20 days PTO
Health insurance
+1
Manufacturing Engineering Manager
Manufacturing Engineering Manager

Soap Creek Resources • Anderson (SC)

On-site
USD 150,000 - 180,000
Bonus
Paid time off 20 days
Holiday calendar
+3
Manufacturing Engineering Manager
Manufacturing Engineering Manager

King Recruiting Services • Anderson (SC)

On-site
USD 150,000 - 180,000
Bonus
Paid time off
Health insurance
+1
Manufacturing Engineering Manager
Manufacturing Engineering Manager

Tom Trese Networking LLC • Anderson (SC)

On-site
USD 150,000 - 180,000
Bonus
Generous paid time off
401(k) matched retirement plan
Manufacturing Engineering Manager
Manufacturing Engineering Manager

Vogrinc Search Group • Anderson (SC)

On-site
USD 150,000 - 180,000
Bonus
Generous paid time off
401(k) matched retirement plan
+1
Manufacturing Engineering Manager
Manufacturing Engineering Manager

SPG • Anderson (SC)

On-site
USD 150,000 - 180,000
Bonus
Generous paid time off (20 days)
Holiday calendar
+3