Manufacturing Engineer (APQP)

IFab Corporation

Gastonia (NC)

On-site

USD 85,000 - 110,000

Full time

3 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

Competitive compensation
Health, dental, vision insurance
401(k) matching
PTO & holidays

Job summary

IFAB Corp. is seeking a Manufacturing Engineer to build and lead the APQP process for metal fabrication products, including stamping, welding, laser cutting, and coating.

You will define phases, gate reviews, timing plans, templates, and responsibilities, then drive new product introductions from the manufacturing side on-site in Gastonia, NC. The role combines process design, run-at-rate, and continuous improvement within a fast‑growing manufacturing environment.

Qualifications

  • Proven APQP/NPI process development and training experience.
  • Bachelor’s degree in Manufacturing, Mechanical, or Industrial Engineering.
  • 5+ years in metal fabrication or related manufacturing sectors.
  • Experience leading parts from quote to start of production.
  • Hands-on process design: flows, layouts, cycle time, capacity.
  • Experience running trial builds and run-at-rate validations.
  • Familiar with APQP/PPAP deliverables (Process Flow, PFMEA, Control Plans).
  • Ability to read blueprints, GD&T, and welding symbols.
  • Proficient in 3D CAD software.
  • Experience with ERP systems (routings, work centers, BOMs).
  • On-site work in Gastonia, NC.

Responsibilities

  • Build, document, and implement IFAB’s APQP process with gates and templates.
  • Roll out the process across Engineering, Quality, Tooling, Production, Purchasing, and Sales.
  • Measure NPI performance and drive continuous improvements.
  • Review customer drawings, GD&T, and specs; define manufacturing routes and tooling inputs.
  • Design process flow, sequences, and layouts for new parts.
  • Calculate standard times, cycle times, and capacity; balance operations.
  • Select and validate dies, weld fixtures, and workholding; coordinate builds.
  • Lead run-at-rate trials and first-article builds.
  • Create APQP/PPAP deliverables and collaborate on PPAP submissions.
  • Set up routings, work centers, BOMs in ERP (Sage 500).
  • Evaluate and implement engineering changes on the floor.
  • Ensure safety compliance in new processes and material handling.

Skills

APQP design
NPI experience
Process design
Blueprint reading
GD&T
3D CAD
ERP systems
On-site Gastonia

Education

Bachelor's degree in Manufacturing/Mechanical/Industrial Engineering

Tools

SolidWorks
Inventor
AutoCAD
Sage 500

Job description

Manufacturing Engineer – APQP Process
Build and Lead IFAB’s APQP Process | Metal Fabrication: Stamping, Welding, Laser & Coating

Location: Gastonia, North Carolina (On-site)
Job Type: Full-time
Industry: Manufacturing / Metal Fabrication
Experience Level: 5+ years

Why Join IFAB Corp.?

At IFAB Corp., we are a leading manufacturing company specializing in high-precision metal fabrication, assembly, and coating services. Our state-of-the-art facility features cutting-edge technology, including advanced lasers and coil stamp machinery. We take immense pride in our culture of quality, safety, operational excellence, and continuous innovation.

About the Role

We are looking for an experienced Manufacturing Engineer to develop and implement IFAB’s APQP process from the ground up. You will define how IFAB introduces new parts: the phases, gate reviews, timing plans, templates, and responsibilities for each team. Then you will put that process into practice by leading new product introductions from the manufacturing side.

Your projects will cover feasibility, process design, layouts, cycle times, tooling and fixtures, and run-at-rate across stamping, laser cutting, tube bending, forming, welding, assembly, and e-coat/powder coat.

This is a process-building and hands-on manufacturing engineering role. It is not a quality documentation or auditing position.

What You Will Do
  • Build the APQP Process: Design, document, and implement IFAB’s APQP process, including phases, gate reviews, timing plans, roles and responsibilities, and standard templates (Process Flow, PFMEA, Control Plan, NPI checklists).
  • Roll It Out: Train Engineering, Quality, Tooling, Production, Purchasing, and Sales on the new process, and lead gate reviews so every new part follows it.
  • Measure and Improve: Track NPI performance (on-time start of production, PPAP approvals, issues during ramp-up) and continuously improve the process based on lessons learned.
  • Feasibility & Quoting Support: Review customer drawings, GD&T, and specifications; define the manufacturing route and provide input on tooling, equipment, cycle time, and cost during quoting.
  • Process Design: Design the process flow, operation sequence, and line or cell layout for new parts.
  • Cycle Time & Capacity: Calculate standard times, cycle times, and capacity; balance operations and confirm the plant can meet customer volumes.
  • Tooling & Fixtures: Select, specify, and validate dies, weld fixtures, checking fixtures, and workholding; coordinate builds and buy-offs with internal and external tool makers.
  • Run-at-Rate & Validation: Plan and lead trial runs, first-article builds, and run-at-rate to prove the process is capable before production.
  • APQP/PPAP Deliverables: Lead the creation of Process Flow Diagrams, PFMEAs, Control Plans, and work instructions, and partner with Quality on PPAP submission.
  • Routings & BOMs: Set up routings, work centers, standard times, and BOMs in our ERP (Sage 500) for new parts.
  • Engineering Changes: Evaluate and implement customer engineering changes on the floor without disrupting production.
  • Safety: Make sure new processes, guarding, ergonomics, and material handling meet plant safety standards.
What You Need (Required)
  • Proven experience developing and implementing an APQP or new product introduction process at a manufacturing company, including creating procedures, templates, and gate reviews, and training teams to follow them.
  • Bachelor’s degree in Manufacturing, Mechanical, or Industrial Engineering, or a related engineering field.
  • 5+ years of manufacturing, process, or NPI engineering experience in metal fabrication, automotive, heavy truck, agricultural, or construction equipment manufacturing.
  • Proven experience leading new parts from quote or design release through start of production.
  • Hands-on experience designing manufacturing processes: process flow, layouts, cycle time, capacity, and tooling or fixture selection.
  • Experience running trial builds and run-at-rate to validate new processes.
  • Working knowledge of APQP and PPAP deliverables (Process Flow, PFMEA, Control Plans).
  • Strong ability to read blueprints, GD&T, and welding symbols.
  • Proficiency in 3D CAD (SolidWorks, Inventor, or AutoCAD).
  • Experience with ERP systems (routings, work centers, BOMs).
  • Ability to work on-site in Gastonia, NC, spending much of the day on the production floor.
Nice to Have
  • Bilingual English/Spanish (strongly preferred for working with our shop-floor team).
  • Experience with several processes in one plant: press brake, stamping, laser cutting, robotic and manual welding, CNC machining, paint/coating.
  • Experience in an IATF 16949 environment.
  • Robotic welding or automation experience.
  • Lean or Six Sigma certification (Green Belt or above).
  • Experience with Sage 500 ERP.
What We Offer
  • Competitive compensation package + annual performance bonus.
  • Comprehensive health, dental, and vision insurance.
  • 401(k) matching program.
  • Paid Time Off (PTO) and paid holidays.
  • Career growth opportunities within a fast-growing, tech-driven manufacturing leader.
Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Engineer (APQP)
Manufacturing Engineer (APQP)

IFAB • Gastonia (NC)

On-site
USD 80,000 - 120,000
APQP Engineer
APQP Engineer

IFABCORP • Gastonia (NC)

On-site
USD 90,000 - 130,000
Health insurance
401(k) matching
PTO & holidays
APQP Engineer
APQP Engineer

IFab Corporation • Gastonia (NC)

On-site
USD 90,000 - 120,000
Health insurance
Dental insurance
Vision insurance
+2
Manufacturing Engineer
Manufacturing Engineer

IFab Corporation • Gastonia (NC)

On-site
USD 75,000 - 105,000
Competitive salary
Career growth opportunities
Collaborative culture
APQP Manufacturing Engineer — NPI for Metal Fabrication
APQP Manufacturing Engineer — NPI for Metal Fabrication

IFAB • Gastonia (NC)

On-site
USD 80,000 - 120,000
Supply Chain Manager
Supply Chain Manager

IFABCORP • Gastonia (NC)

On-site
USD 90,000 - 140,000
Competitive compensation package
Health, dental, and vision insurance
401(k) matching program
+2
Supply Chain Manager
Supply Chain Manager

IFab Corporation • Gastonia (NC)

On-site
USD 85,000 - 115,000
Competitive compensation package
Health, dental, and vision insurance
401(k) matching
+2
APQP Process Leader - Metal Fabrication & NPI
APQP Process Leader - Metal Fabrication & NPI

IFab Corporation • Gastonia (NC)

On-site
USD 85,000 - 110,000
Competitive compensation
Health, dental, vision insurance
401(k) matching
+1
Mechanical Design Engineer at IFab Corporation Gastonia, NC
Mechanical Design Engineer at IFab Corporation Gastonia, NC

kozmetickesluzby.vecnakraska.sk - Jobboard • Gastonia (NC)

On-site
USD 75,000 - 95,000
Engineering Manager
Engineering Manager

IFab Corporation • Gastonia (NC)

On-site
USD 120,000 - 180,000