Manufacturing Engineer

AMETEK, Inc.; Middlefield (CT); On-site; USD 85,000 - 105,000; Full time

Benefits offered by this job

401k

Paid time off

Job summary

Zygo Corporation in Middlefield, CT, is seeking a Manufacturing Engineer to support mechanical and opto‑mechanical product assembly, tooling design, documentation, and NPI. You will document processes, develop fixtures, and collaborate with Design Engineering to ensure manufacturability and quality.

The role requires 3–5+ years in precision assemblies, SolidWorks experience, and PFMEA familiarity. Travel to suppliers may be needed as projects ramp up.

Qualifications

• Bachelor’s degree in Mechanical or Optical Engineering.
• 3–5+ years of experience with precision assemblies and alignment-sensitive systems.
• Experience with PFMEA, control plans, process validation.
• SolidWorks experience for tooling and fixture design.
• Experience with NPI in manufacturing.
• Ability to travel to suppliers if required.

Responsibilities

• Develop, document, and maintain detailed assembly and test work instructions, SOPs, visual aids, and bill of process (BOPs).
• Document optical and opto-mechanical assembly methods, alignment procedures, and inspection criteria.
• Ensure manufacturing documentation supports repeatability, quality, safety, and training needs.
• Update documentation based on engineering changes, process improvements, and lessons learned.
• Design mechanical tooling, fixtures, gauges, and assembly aids to support mechanical and optical assembly processes.
• Develop tooling solutions to support optical alignment, handling, and precision fixturing.
• Coordinate fabrication and qualification of tooling with machine shops and external vendors.
• Validate tooling and fixtures through pilot builds and production trials.
• Support NPI projects from early development through production ramp-up.
• Collaborate with Design Engineering to ensure designs are manufacturable, testable, and scalable.
• Support DFM/DFA efforts for mechanical and optical assemblies.
• Participate in manufacturing readiness reviews (MRR), process flow development, and line set up for new products.
• Support process risk analysis activities (e.g., PFMEA) and production validation builds.
• Provide hands-on production floor support to troubleshoot assembly, test, and yield issues.
• Investigate and resolve process deviations, nonconformances, and product performance issues using structured problem-solving techniques such as 8D and RCCA.
• Support engineering change implementation and ensure minimal disruption to production.
• Train manufacturing and test personnel on new processes, tools, and equipment.
• Drive process improvements focused on quality, efficiency, ergonomics, and cost reduction.
• Support Lean manufacturing initiatives such as standard work, 5S, and Kaizen activities.
• Work closely with Quality Engineering on corrective and preventive actions.
• Interface with supply chain, engineering, and operations teams to resolve cross-functional issues.

Skills

Mechanical design

Optical alignment

Documentation

Problem solving

Cross-functional collaboration

Education

Bachelor’s degree in Mechanical/Optical Engineering

Tools

SolidWorks

Job description

Select how often (in days) to receive an alert:

Are you ready to collaborate with leading experts in optical engineering and contribute to the next level of precision and excellence?

At Zygo, your skills and insights will be integral to our core values of curiosity, collaboration, and persistence. For over 50 years, Zygo Corporation in Middlefield, CT, has been a global leader in advanced optical metrology systems, ultra-precise optical components, and complex electro-optical systems. Join our team, where your expertise will drive innovative solutions, address complex technical challenges, and uphold the highest standards of precision and safety.

As a Manufacturing Engineer you will support the production of mechanical and opto‑mechanical products through process development, tooling design, documentation, and hands‑on production support. This role is responsible for documenting assembly and test processes, designing mechanical fixtures and tooling, supporting new product introduction (NPI), and resolving production issues to ensure high-quality, repeatable manufacturing processes.

Key Responsibilities:

• Develop, document, and maintain detailed assembly and test work instructions, SOPs, visual aids, and bill of process (BOPs).
• Document optical and opto‑mechanical assembly methods, alignment procedures, and inspection criteria.
• Ensure manufacturing documentation supports repeatability, quality, safety, and training needs.
• Update documentation based on engineering changes, process improvements, and lessons learned.
• Design mechanical tooling, fixtures, gauges, and assembly aids to support mechanical and optical assembly processes.
• Develop tooling solutions to support optical alignment, handling, and precision fixturing.
• Coordinate fabrication and qualification of tooling with machine shops and external vendors.
• Validate tooling and fixtures through pilot builds and production trials.
• Support NPI projects from early development through production ramp-up.
• Collaborate with Design Engineering to ensure designs are manufacturable, testable, and scalable.
• Support DFM/DFA efforts for mechanical and optical assemblies.
• Participate in manufacturing readiness reviews (MRR), process flow development, and line set up for new products.
• Support process risk analysis activities (e.g., PFMEA) and production validation builds.
• Provide hands‑on production floor support to troubleshoot assembly, test, and yield issues.
• Investigate and resolve process deviations, nonconformances, and product performance issues using structured problem‑solving techniques such as 8D and RCCA.
• Support engineering change implementation and ensure minimal disruption to production.
• Train manufacturing and test personnel on new processes, tools, and equipment.
• Drive process improvements focused on quality, efficiency, ergonomics, and cost reduction.
• Support Lean manufacturing initiatives such as standard work, 5S, and Kaizen activities.
• Work closely with Quality Engineering on corrective and preventive actions.
• Interface with supply chain, engineering, and operations teams to resolve cross‑functional issues.

Key Requirements:

• Bachelor’s degree in Mechanical, Optical Engineering or related field.
• 3–5+ years of experience working with precision assemblies, optical components, and alignment‑sensitive systems in a fast‑paced manufacturing environment with direct shop‑floor presence and involvement.
• Prior experience in regulated or high‑reliability manufacturing environment is a plus.
• Detail‑oriented mindset with strong technical documentation skills to support documenting assembly and test processes.
• Direct experience working on mechanical and optical assemblies.
• Experience with mechanical tooling and fixture design using SolidWorks.
• Familiarity with optical components, alignment methods, or precision assemblies.
• Flexible and able to pivot with changing priorities; ability to manage multiple priorities and projects.
• Communicating and influencing skills that foster collaborative problem‑solving across functions and levels, particularly between engineering design and manufacturing operations.
• Experience supporting NPI for precision or alignment‑sensitive products; familiarity with PFMEA, control plans and process validation preferred.
• Bring your problem‑solving skills, along with your resilience and resourcefulness, to support the team and drive root cause analysis to improve process and workflow.
• Occasional lifting, standing, and equipment set‑up.
• Ability to travel to suppliers or partner sites, if required.

Engage your drive to achieve results and to grow your career with access to hands‑on innovation opportunities, cross‑disciplinary projects, and advanced training.

Bring your passion and commitment to Zygo, where we are curious, collaborative, persistent, confident, and problem‑solvers and where safety and quality guide every step of our journey. Grow with us as we solve complex challenges, inspire confidence, and drive excellence in manufacturing.

Are you ready to expand the boundaries of possibility, simplify the complex, and embody the values that define our success?

We welcome your unique perspective and invite you to join us! We offer competitive compensation, benefits, (401k), and paid time off programs. Compensation and position level will be set based on experience.

Due to the nature of Zygo's programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export‑controlled information and source code.

Compensation

Employee Type: Salaried

Currency: USD

Salary Minimum: 85,000

Salary Maximum: 105,000

Incentive: No

Disclaimer:Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location.

We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 [phone].