Manufacturing Engineer

Heat Recovery Innovations

Dover (NH)

On-site

USD 85,000 - 120,000

Full time

5 days ago
Be an early applicant

A complete application in a minute

Tailored resume and cover letter, ready to send.

Get past ATS filters

Benefits offered by this job

15 days PTO
Paid Holidays
Health insurance (80% employer-paid)
Dental (employer-paid)
Vision (employer-paid)
Disability (employer-paid)
Life insurance
401(k) plan with company match

Job summary

Heat Recovery Innovations in Dover, NH is seeking a Manufacturing Engineer to own production flow, standard work, and equipment for fabrication, welding, brazing, and assembly. You will drive process improvements, partner with Design Engineering on DFM, and ensure safety and ergonomics on the shop floor.

You will lead time studies, develop labor standards, maintain routings and BOMs, and coordinate with outside suppliers. Strong Lean background and SolidWorks proficiency are essential.

Qualifications

  • Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering, or equivalent experience.
  • 7+ years of manufacturing engineering experience supporting fabrication and assembly operations.
  • Experience with fabricated and welded assemblies, including weld fixture design.
  • Working knowledge of stainless steels and nickel alloys.
  • Proficiency in SolidWorks.
  • Ability to interpret engineering drawings, GD&T, and weld symbols, and to produce build-to-print drawings.
  • Demonstrated use of Lean tools (5S, VSM, kaizen, SMED, standard work).
  • Track record of measurable process improvement, scrap reduction, or cost reduction.
  • Strong communication skills with both engineers and production staff.

Responsibilities

  • Own production flow, standard work, and equipment for fabrication, welding, brazing, and assembly processes
  • Identify and resolve equipment, capacity, and resource constraints
  • Lead process improvement and scrap reduction initiatives using Lean tools and root cause analysis (5 Why, fishbone, 8D, PFMEA)
  • Design and implement fixtures, weld fixtures, tooling, and equipment to improve quality, efficiency, and ergonomics
  • Conduct time studies and establish labor standards; provide process and labor estimates to support quoting
  • Create and maintain routings, BOMs, and work instructions; train operators on new and revised processes
  • Partner with Design Engineering on design-for-manufacturability (DFM) feedback early in the design cycle
  • Work with Quality to define in-process and final inspection points and to resolve nonconformances
  • Troubleshoot production, equipment, and quality issues on the shop floor
  • Evaluate and coordinate with outside suppliers and subcontractors on outsourced processes, capability, and cost
  • Identify safety and ergonomic risks and implement controls in partnership with EHS
  • Prepare capital equipment justifications, including ROI and implementation plans
  • Serve on the implementation team for digital job travelers / ERP shop floor routing

Skills

Lean tools
Strong communication
GD&T interpretation
Process improvement
Cross-functional collaboration

Education

Bachelor's in Mechanical/Manufacturing/Industrial Engineering

Tools

SolidWorks
Weld fixture design
ERP/MRP systems
ASME/WPS knowledge

Job description

Description

Manufacturing Engineer

Heat Recovery Innovations | Dover, NH (On-site) | Full-time, Exempt

Reports to: VP of Operations

About HRI

HRI (www.heatrecoveryinnovations.com) is an energy transition enabler, collaborating with innovative companies and technologies. We collaborate with customers of all sizes to develop the next generation of heat recovery technologies to improve fuel efficiency for power generation, transportation, and industrial applications. HRI’s proven team has deep industry experience in designing, engineering, and producing high temperature heat exchangers.

Position Summary

The Manufacturing Engineer owns the manufacturing processes in our Dover facility, from production flow and standard work to the equipment, tooling, and fixtures that support them. This role partners with Design Engineering, Quality, and the shop floor to improve throughput, reduce scrap, make the work safer and more ergonomic, and solve production problems as they come up.

Key Responsibilities
  • Own production flow, standard work, and equipment for fabrication, welding, brazing, and assembly processes
  • Identify and resolve equipment, capacity, and resource constraints
  • Lead process improvement and scrap reduction initiatives using Lean tools and root cause analysis (5 Why, fishbone, 8D, PFMEA)
  • Design and implement fixtures, weld fixtures, tooling, and equipment to improve quality, efficiency, and ergonomics
  • Conduct time studies and establish labor standards; provide process and labor estimates to support quoting
  • Create and maintain routings, BOMs, and work instructions; train operators on new and revised processes
  • Partner with Design Engineering on design-for-manufacturability (DFM) feedback early in the design cycle
  • Work with Quality to define in-process and final inspection points and to resolve nonconformances
  • Troubleshoot production, equipment, and quality issues on the shop floor
  • Evaluate and coordinate with outside suppliers and subcontractors on outsourced processes, capability, and cost
  • Identify safety and ergonomic risks and implement controls in partnership with EHS
  • Prepare capital equipment justifications, including ROI and implementation plans
  • Serve on the implementation team for digital job travelers / ERP shop floor routing

Requirements

Required Qualifications
  • Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering, or equivalent experience
  • 7+ years of manufacturing engineering experience supporting fabrication and assembly operations
  • Experience with fabricated and welded assemblies, including weld fixture design
  • Working knowledge of stainless steels and nickel alloys
  • Proficiency in SolidWorks
  • Ability to interpret engineering drawings, GD&T, and weld symbols, and to produce build-to-print drawings
  • Demonstrated use of Lean tools (5S, VSM, kaizen, SMED, standard work)
  • Track record of measurable process improvement, scrap reduction, or cost reduction
  • Strong communication skills with both engineers and production staff
Preferred Qualifications
  • Experience with vacuum brazing and heat treat processes
  • Knowledge of ASME Section VIII/IX and/or AWS D1.1, including WPS/PQR
  • Experience with heat exchangers or pressure vessels
  • ERP/MRP experience ([your system])
  • Six Sigma Green Belt or similar certification
Physical Demands and Work Environment

Work is split between the office and the production floor. The role requires regular standing and walking, lifting up to 50 lbs, and wearing required PPE in an environment with noise, welding, and moving equipment.

Job description statements are intended to describe the general nature and level of work being performed by employees assigned to this job title. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required.

Flex Energy Solutions is an equal opportunity employer inclusive of female, minority, disability and veterans, (M/F/D/V). Hiring, promotion, transfer, compensation, benefits, discipline, termination and all other employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, age, disability, national origin, citizenship/immigration status, veteran status or any other protected status.

Compensation and Benefits
  • Competitive salary
  • 15 days of paid time off (PTO) with accrual beginning day one
  • Paid Holidays
  • Floating Holidays
  • Annual allowance for work-related wear
  • Health insurance (80% employer-paid)
  • Dental (100% employer-paid)
  • Vision (100% employer-paid)
  • Short term and long-term Disability (100% employer-paid)
  • Life insurance
  • Long term care offerings
  • 401(k) plan with up to a 6% company match
Equal Employment Opportunity

Heat Recovery Innovations is an equal opportunity employer inclusive of female, minority, disability, and veterans, (M/F/D/V). Hiring, promotion, transfer, compensation, benefits, discipline, termination, and all other employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, age, disability, national origin, citizenship/immigration status, veteran status, or any other protected status.

Get your free, confidential resume review.

or drag and drop your file here.

Similar jobs

Similar jobs worth comparing

Manufacturing Engineer II (on-site)
Manufacturing Engineer II (on-site)

API Heat Transfer • Franklin (WI)

On-site
USD 75,000 - 100,000
Competitive salary
Annual performance-based incentive op 
Medical, Dental, and Vision Insurance
+8
Process Engineer
Process Engineer

Bodycote • Fountain Inn (SC)

On-site
USD 90,000 - 130,000
Industrial Engineer (51606)
Industrial Engineer (51606)

Gradian Thermal Solutions • Osseo (MN)

On-site
USD 75,000 - 110,000
Medical, vision, and dental plans
Disability insurance
Group term life insurance
+1
Engineering Manager
Engineering Manager

Bodycote • Los Angeles (CA)

On-site
USD 160,000 - 190,000
401k Match
Medical Insurance
Dental Insurance
+1
Manufacturing Engineer - Lincoln, NH
Manufacturing Engineer - Lincoln, NH

Hubbell Lighting Inc • Lincoln (NH)

On-site
USD 70,000 - 90,000
HRSG Process Specialist
HRSG Process Specialist

Nooter Eriksen Srl • St. Louis (MO)

Hybrid
USD 100,000 - 130,000
Flexible work schedule
Full benefits package
401(K) employer match
+3
HRSG Process Specialist
HRSG Process Specialist

Nooter/Eriksen, Inc. • Fenton (MO)

Hybrid
USD 110,000 - 170,000
Flexible work schedule
401(k) employer match
Medical, dental coverage
+3
Mechanical Design Engineer II
Mechanical Design Engineer II

Hardware FYI • Westminster (CO)

Hybrid
USD 90,000 - 130,000
Competitive salary
PTO and holidays
Health, dental, and vision insurance
+5
Supervisor, Production - 3rd Shift
Supervisor, Production - 3rd Shift

API Heat Transfer • Franklin (WI)

On-site
USD 65,000 - 85,000
Manufacturing Engineer
Manufacturing Engineer

Cooler Master USA • Fremont (CA)

On-site
USD 70,000 - 90,000
Medical insurance
Vision insurance
401(k)